FB503 Surface modifications and plasma applications

Přírodovědecká fakulta
podzim 2020
Rozsah
1/3/0. 3 kr. Ukončení: z.
Vyučováno online.
Vyučující
doc. RNDr. Tomáš Homola, PhD. (cvičící)
doc. Mgr. Dušan Kováčik, Ph.D. (cvičící)
Garance
doc. RNDr. Tomáš Homola, PhD.
Ústav fyziky a technologií plazmatu – Fyzikální sekce – Přírodovědecká fakulta
Kontaktní osoba: doc. RNDr. Tomáš Homola, PhD.
Dodavatelské pracoviště: Ústav fyziky a technologií plazmatu – Fyzikální sekce – Přírodovědecká fakulta
Omezení zápisu do předmětu
Předmět je nabízen i studentům mimo mateřské obory.
Mateřské obory/plány
Cíle předmětu
The course aims to teach and familiarize students with the concept of practical plasma applications for surface modification of materials. The course is focused on the basic principles of plasma generation theory, application of plasma for surface treatments, characterization of surfaces treated by plasma from the chemical and morphological aspects, the advantages and disadvantages of various plasma sources, especially those available at Department of Physical Electronics.
Výstupy z učení
  • The basic theory of plasma generation at atmospheric pressure
  • The concept of cold plasma for surface modifications
  • Dielectric barrier discharges
  • The effects of plasma on various materials
  • Application of plasma treatments in various industrial segments
  • Osnova
    • Lectures:
    • 1. Introduction to atmospheric plasma
    • 2. Dielectric barrier discharges
    • 3. Effects of surface plasma treatments
    • 4. Industrial applications of plasma treatments
    • Practical exercises:
    • 5. Positive and negative aspects of industrial corona 1
    • 6. Positive and negative aspects of industrial corona 2
    • 7. Plasma treatment efficiency of various plasma sources 1
    • 8. Plasma treatment efficiency of various plasma sources 2
    • 9. Ageing effect of surfaces treated by various plasma sources 1
    • 10. Ageing effect of surfaces treated by various plasma sources 2
    Literatura
      povinná literatura
    • T. Homola, Modification of surfaces and practical applications of plasma, a textbook for postgraduate students and researches, MUNI 2019
    • T. Homola, L. Y. L. Wu, and M. Černák, “Atmospheric plasma surface activation of poly(ethylene Terephthalate) film for roll-to-roll application of transparent conductive coating,” J. Adhes., vol. 90, no. 4, 2014.
    • K. N. Kim, S. M. Lee, A. Mishra, and G. Y. Yeom, “Atmospheric Pressure Plasmas for Surface Modification of Flexible and Printed Electronic Devices: A Review,” Thin Solid Films, vol. 598, pp. 315–334, May 2015.
    • F. Rezaei, M. D. Dickey, M. Bourham, and P. J. Hauser, “Surface modification of PET film via a large area atmospheric pressure plasma: An optical analysis of the plasma and surface characterization of the polymer film,” Surf. Coatings Technol., vol. 309,
    • J. R. Roth, Industrial Plasma Engineering: Volume 2 - Applications to Nonthermal Plasma Processing, vol. 2. Bristol and Philadelphia: CRC Press, 2001.
    Výukové metody
    Lectures and exercises in laboratory
    Metody hodnocení
    Successful completion of the course based on completed laboratory reports
    Vyučovací jazyk
    Angličtina
    Další komentáře
    Předmět je dovoleno ukončit i mimo zkouškové období.
    Předmět je vyučován každoročně.
    Výuka probíhá každý týden.
    Předmět je zařazen také v obdobích podzim 2019, podzim 2021, podzim 2022, podzim 2023.