Database System Concepts, 6th Ed. ©Silberschatz, Korth and Sudarshan See www.db-book.com for conditions on re-use Chapter 11: Indexing and Hashing ©Silberschatz, Korth and Sudarshan11.2Database System Concepts - 6th Edition Chapter 11: Indexing and Hashing  Basic Concepts  Ordered Indices  B+-Tree Index Files  B-Tree Index Files  Static Hashing  Dynamic Hashing  Comparison of Ordered Indexing and Hashing  Index Definition in SQL  Multiple-Key Access ©Silberschatz, Korth and Sudarshan11.3Database System Concepts - 6th Edition Basic Concepts  Indexing mechanisms used to speed up access to desired data.  E.g., author catalog in library  Search Key - attribute to set of attributes used to look up records in a file.  An index file consists of records (called index entries) of the form  Index files are typically much smaller than the original file  Two basic kinds of indices:  Ordered indices: search keys are stored in sorted order  Hash indices: search keys are distributed uniformly across “buckets” using a “hash function”. search-key pointer ©Silberschatz, Korth and Sudarshan11.4Database System Concepts - 6th Edition Query Types & Index Evaluation Metrics  Query types:  Exact-match query: records with a specified value in the attribute  Range (interval) query: records with an attribute value falling in a specified range of values  Index evaluation metrics:  Access types supported efficiently (types of queries)  Access time  Insertion time  Deletion time  Space overhead ©Silberschatz, Korth and Sudarshan11.5Database System Concepts - 6th Edition Ordered Indices  In an ordered index, index entries are stored sorted on the search key value. E.g., author catalog in library.  Primary index: in a sequential file, the index whose search key specifies the sequential order of the file.  Also called clustering index  The search key of a primary index is usually but not necessarily the primary key.  Secondary index: an index whose search key specifies an order different from the sequential order of the file.  Also called non-clustering index  Index-sequential file: sequential file with a primary index. ©Silberschatz, Korth and Sudarshan11.6Database System Concepts - 6th Edition Dense Index Files  Dense index — Index record appears for every search-key value in the file.  E.g. index on ID attribute of instructor relation ©Silberschatz, Korth and Sudarshan11.7Database System Concepts - 6th Edition Dense Index Files (Cont.)  Dense index on dept_name, with instructor file sorted on dept_name ©Silberschatz, Korth and Sudarshan11.8Database System Concepts - 6th Edition Sparse Index Files  Sparse Index: contains index records for only some search-key values.  Applicable when records are sequentially ordered on search-key  To locate a record with search-key value K we:  Find index record with largest search-key value < K  Search file sequentially starting at the record to which the index record points ©Silberschatz, Korth and Sudarshan11.9Database System Concepts - 6th Edition Sparse Index Files (Cont.)  Compared to dense indices:  Less space and less maintenance overhead for insertions and deletions.  Generally slower than dense index for locating records.  Good tradeoff: sparse index with an index entry for every block in file, corresponding to least search-key value in the block. ©Silberschatz, Korth and Sudarshan11.10Database System Concepts - 6th Edition Multilevel Index  If primary index does not fit in memory, access becomes expensive.  Solution: treat primary index kept on disk as a sequential file and construct a sparse index on it.  outer index – a sparse index of primary index  inner index – the primary index file  If even outer index is too large to fit in main memory, yet another level of index can be created, and so on.  Indices at all levels must be updated on insertion or deletion from the file. ©Silberschatz, Korth and Sudarshan11.11Database System Concepts - 6th Edition Multilevel Index (Cont.) ©Silberschatz, Korth and Sudarshan11.12Database System Concepts - 6th Edition Index Update: Deletion  Single-level index entry deletion:  Dense indices – deletion of search-key is similar to file record deletion.  Sparse indices –  if an entry for the search key exists in the index, it is deleted by replacing the entry in the index with the next search-key value in the file (in search-key order).  If the next search-key value already has an index entry, the entry is deleted instead of being replaced.  If deleted record was the only record in the file with its particular search-key value, the search-key is deleted from the index also. ©Silberschatz, Korth and Sudarshan11.13Database System Concepts - 6th Edition Index Update: Insertion  Single-level index insertion:  Perform a lookup using the search-key value appearing in the record to be inserted.  Dense indices – if the search-key value does not appear in the index, insert it.  Sparse indices – if index stores an entry for each block of the file, no change needs to be made to the index unless a new block is created.  If a new block is created, the first search-key value appearing in the new block is inserted into the index.  Multilevel index insertion and deletion:  algorithms are simple extensions of the single-level algorithms ©Silberschatz, Korth and Sudarshan11.14Database System Concepts - 6th Edition Secondary Indices  Frequently, one wants to find all the records whose values in a certain field (which is not the search-key of the primary index) satisfy some condition.  Example 1: In the instructor relation stored sequentially by ID, we may want to find all instructors in a particular department  Example 2: as above, but where we want to find all instructors with a specified salary or with salary in a specified range of values  We can have a secondary index with an index record for each search-key value ©Silberschatz, Korth and Sudarshan11.15Database System Concepts - 6th Edition Secondary Indices Example  Index record points to a bucket that contains pointers to all the actual records with that particular search-key value.  Secondary indices have to be dense Secondary index on salary field of instructor ©Silberschatz, Korth and Sudarshan11.16Database System Concepts - 6th Edition Primary and Secondary Indices  Indices offer substantial benefits when searching for records.  BUT: Updating indices imposes overhead on database modification -- when a file is modified, every index on the file must be updated,  Sequential scan using primary index is efficient, but a sequential scan using a secondary index is expensive  Each record access may fetch a new block from disk  Block fetch requires about 5 to 10 milliseconds, versus about 100 nanoseconds for memory access ©Silberschatz, Korth and Sudarshan11.17Database System Concepts - 6th Edition B+-Tree Index Files  Disadvantage of indexed-sequential files  performance degrades as file grows, since many overflow blocks get created.  Periodic reorganization of entire file is required.  Advantage of B+-tree index files:  automatically reorganizes itself with small, local, changes, in the face of insertions and deletions.  Reorganization of entire file is not required to maintain performance.  (Minor) disadvantage of B+-trees:  extra insertion and deletion overhead, space overhead.  Advantages of B+-trees outweigh disadvantages  B+-trees are used extensively B+-tree indices are an alternative to indexed-sequential files. ©Silberschatz, Korth and Sudarshan11.18Database System Concepts - 6th Edition Example of B+-Tree ©Silberschatz, Korth and Sudarshan11.19Database System Concepts - 6th Edition B+-Tree Index Files (Cont.)  All paths from root to leaf are of the same length  Each node that is not a root or a leaf has between n/2 and n children.  A leaf node has between (n–1)/2 and n–1 values  Special cases:  If the root is not a leaf, it has at least 2 children.  If the root is a leaf (that is, there are no other nodes in the tree), it can have between 0 and (n–1) values. A B+-tree is a rooted tree satisfying the following properties: ©Silberschatz, Korth and Sudarshan11.20Database System Concepts - 6th Edition B+-Tree Node Structure  Typical node  Ki are the search-key values  Pi are pointers to children (for non-leaf nodes) or pointers to records or buckets of records (for leaf nodes).  The search-keys in a node are ordered K1 < K2 < K3 < . . . < Kn–1 (Initially assume no duplicate keys, address duplicates later) ©Silberschatz, Korth and Sudarshan11.21Database System Concepts - 6th Edition Leaf Nodes in B+-Trees  For i = 1, 2, . . ., n–1, pointer Pi points to a file record with search-key value Ki,  If Li, Lj are leaf nodes and i < j, Li’s search-key values are less than or equal to Lj’s search-key values  Pn points to next leaf node in search-key order Properties of a leaf node: ©Silberschatz, Korth and Sudarshan11.22Database System Concepts - 6th Edition Non-Leaf Nodes in B+-Trees  Non leaf nodes form a multi-level sparse index on the leaf nodes. For a non-leaf node with m pointers:  All the search-keys in the subtree to which P1 points are less than K1  For 2  i  n – 1, all the search-keys in the subtree to which Pi points have values greater than or equal to Ki–1 and less than Ki  All the search-keys in the subtree to which Pn points have values greater than or equal to Kn–1 ©Silberschatz, Korth and Sudarshan11.23Database System Concepts - 6th Edition Example of B+-tree  Leaf nodes must have between 3 and 5 values  ( (n–1)/2 and n –1 ).  Non-leaf nodes other than root must have between 3 and 6 children  ( n/2 and n ).  Root must have at least 2 children. B+-tree for instructor file (n = 6) ©Silberschatz, Korth and Sudarshan11.24Database System Concepts - 6th Edition Observations about B+-trees  Since the inter-node connections are done by pointers, “logically” close blocks need not be “physically” close.  The non-leaf levels of the B+-tree form a hierarchy of sparse indices.  The B+-tree contains a relatively small number of levels  Level below root has at least 2* n/2 values  Next level has at least 2* n/2 * n/2 values  .. etc.  If there are K search-key values in the file, the tree height is no more than  logn/2(K)  thus searches can be conducted efficiently.  Insertions and deletions to the main file can be handled efficiently, as the index can be restructured in logarithmic time (as we shall see). ©Silberschatz, Korth and Sudarshan11.25Database System Concepts - 6th Edition Queries on B+-Trees  Find record with search-key value V. 1. C=root 2. While C is not a leaf node { 1. Let i be least value s.t. V  Ki. 2. If no such exists, set C = last non-null pointer in C 3. Else { if (V= Ki ) Set C = Pi +1 else set C = Pi} } 3. Let i be least value s.t. Ki = V 4. If there is such a value i, follow pointer Pi to the desired record. 5. Else no record with search-key value k exists. ©Silberschatz, Korth and Sudarshan11.26Database System Concepts - 6th Edition Handling Duplicates  With duplicate search keys  In both leaf and internal nodes,  we cannot guarantee that K1 < K2 < K3 < . . . < Kn–1  but can guarantee K1  K2  K3  . . .  Kn–1  Search-keys in the subtree to which Pi points  are  Ki,, but not necessarily < Ki,  To see why, suppose same search key value V is present in two leaf node Li and Li+1. Then in parent node Ki must be equal to V ©Silberschatz, Korth and Sudarshan11.27Database System Concepts - 6th Edition Handling Duplicates  We modify find procedure as follows  traverse Pi even if V = Ki  As soon as we reach a leaf node C check if C has only search key values less than V if so set C = right sibling of C before checking whether C contains V  Procedure printAll  uses modified find procedure to find first occurrence of V  Traverse through consecutive leaves to find all occurrences of V ** Errata note: modified find procedure missing in first printing of 6th edition ©Silberschatz, Korth and Sudarshan11.28Database System Concepts - 6th Edition Queries on B+-Trees (Cont.)  If there are K search-key values in the file, the height of the tree is no more than logn/2(K).  A node is generally the same size as a disk block, typically 4 kilobytes  and n is typically around 100 (40 bytes per index entry).  With 1 million search key values and n = 100  at most log50(1,000,000) = 4 nodes are accessed in a lookup.  Contrast this with a balanced binary tree with 1 million search key values — around 20 nodes are accessed in a lookup  above difference is significant since every node access may need a disk I/O, costing around 20 milliseconds ©Silberschatz, Korth and Sudarshan11.29Database System Concepts - 6th Edition Updates on B+-Trees: Insertion 1. Find the leaf node in which the search-key value would appear 2. If the search-key value is already present in the leaf node 1. Add record to the file 2. If necessary add a pointer to the bucket. 3. If the search-key value is not present, then 1. add the record to the main file (and create a bucket if necessary) 2. If there is room in the leaf node, insert (key-value, pointer) pair in the leaf node 3. Otherwise, split the node (along with the new (key-value, pointer) entry) as discussed in the next slide. ©Silberschatz, Korth and Sudarshan11.30Database System Concepts - 6th Edition Updates on B+-Trees: Insertion (Cont.)  Splitting a leaf node:  take the n (search-key value, pointer) pairs (including the one being inserted) in sorted order. Place the first n/2 in the original node, and the rest in a new node.  let the new node be p, and let k be the least key value in p. Insert (k,p) in the parent of the node being split.  If the parent is full, split it and propagate the split further up.  Splitting of nodes proceeds upwards till a node that is not full is found.  In the worst case the root node may be split increasing the height of the tree by 1. Result of splitting node containing Brandt, Califieri and Crick on inserting Adams Next step: insert entry with (Califieri,pointer-to-new-node) into parent ©Silberschatz, Korth and Sudarshan11.31Database System Concepts - 6th Edition B+-Tree Insertion B+-Tree before and after insertion of “Adams” ©Silberschatz, Korth and Sudarshan11.32Database System Concepts - 6th Edition B+-Tree Insertion B+-Tree before and after insertion of “Lamport” ©Silberschatz, Korth and Sudarshan11.33Database System Concepts - 6th Edition  Splitting a non-leaf node: when inserting (k,p) into an already full internal node N  Copy N to an in-memory area M with space for n+1 pointers and n keys  Insert (k,p) into M  Copy P1,K1, …, K n/2-1,P n/2 from M back into node N  Copy Pn/2+1,K n/2+1,…,Kn,Pn+1 from M into newly allocated node N’  Insert (K n/2,N’) into parent N  Read pseudocode in book! Srinivasan Insertion in B+-Trees (Cont.) Califieri Einstein Gold Srinivasan Califieri Einstein Gold ©Silberschatz, Korth and Sudarshan11.34Database System Concepts - 6th Edition Updates on B+-Trees: Deletion  Find the record to be deleted, and remove it from the main file and from the bucket (if present)  Remove (search-key value, pointer) from the leaf node if there is no bucket or if the bucket has become empty  If the node has too few entries due to the removal, and the entries in the node and a sibling fit into a single node, then merge siblings:  Insert all the search-key values in the two nodes into a single node (the one on the left), and delete the other node.  Delete the pair (Ki–1, Pi), where Pi is the pointer to the deleted node, from its parent, recursively using the above procedure. ©Silberschatz, Korth and Sudarshan11.35Database System Concepts - 6th Edition Updates on B+-Trees: Deletion  Otherwise, if the node has too few entries due to the removal, but the entries in the node and a sibling do not fit into a single node, then redistribute pointers:  Redistribute the pointers between the node and a sibling such that both have more than the minimum number of entries.  Update the corresponding search-key value in the parent of the node.  The node deletions may cascade upwards till a node which has n/2 or more pointers is found.  If the root node has only one pointer after deletion, it is deleted and the sole child becomes the root. ©Silberschatz, Korth and Sudarshan11.36Database System Concepts - 6th Edition Examples of B+-Tree Deletion  Deleting “Srinivasan” causes merging of under-full leaves Before and after deleting “Srinivasan” ©Silberschatz, Korth and Sudarshan11.37Database System Concepts - 6th Edition Examples of B+-Tree Deletion (Cont.) Deletion of “Singh” and “Wu” from result of previous example  Leaf containing Singh and Wu became underfull, and borrowed a value Kim from its left sibling  Search-key value in the parent changes as a result ©Silberschatz, Korth and Sudarshan11.38Database System Concepts - 6th Edition Example of B+-tree Deletion (Cont.) Before and after deletion of “Gold” from earlier example  Node with Gold and Katz became underfull, and was merged with its sibling  Parent node becomes underfull, and is merged with its sibling  Value separating two nodes (at the parent) is pulled down when merging  Root node then has only one child, and is deleted ©Silberschatz, Korth and Sudarshan11.39Database System Concepts - 6th Edition Non-Unique Search Keys  Alternatives to scheme described earlier  Buckets on separate block (bad idea)  List of tuple pointers with each key  Extra code to handle long lists  Deletion of a tuple can be expensive if there are many duplicates on search key (why?)  Low space overhead, no extra cost for queries  Make search key unique by adding a record-identifier  Extra storage overhead for keys  Simpler code for insertion/deletion  Widely used ©Silberschatz, Korth and Sudarshan11.40Database System Concepts - 6th Edition B+-Tree File Organization  Index file degradation problem is solved by using B+-Tree indices.  Data file degradation problem is solved by using B+-Tree File Organization.  The leaf nodes in a B+-tree file organization store records, instead of pointers.  Leaf nodes are still required to be half full  Since records are larger than pointers, the maximum number of records that can be stored in a leaf node is less than the number of pointers in a nonleaf node.  Insertion and deletion are handled in the same way as insertion and deletion of entries in a B+-tree index. ©Silberschatz, Korth and Sudarshan11.41Database System Concepts - 6th Edition B+-Tree File Organization (Cont.)  Good space utilization important since records use more space than pointers.  To improve space utilization, involve more sibling nodes in redistribution during splits and merges  Involving 2 siblings in redistribution (to avoid split / merge where possible) results in each node having at least entries Example of B+-tree File Organization  3/2n ©Silberschatz, Korth and Sudarshan11.42Database System Concepts - 6th Edition Other Issues in Indexing  Record relocation and secondary indices  If a record moves, all secondary indices that store record pointers have to be updated  Node splits in B+-tree file organizations become very expensive  Solution: use primary-index search key instead of record pointer in secondary index  Extra traversal of primary index to locate record – Higher cost for queries, but node splits are cheap  Add record-id if primary-index search key is non-unique ©Silberschatz, Korth and Sudarshan11.43Database System Concepts - 6th Edition Indexing Strings  Variable length strings as keys  Variable fanout  Use space utilization as criterion for splitting, not number of pointers  Prefix compression  Key values at internal nodes can be prefixes of full key  Keep enough characters to distinguish entries in the subtrees separated by the key value – E.g. “Silas” and “Silberschatz” can be separated by “Silb”  Keys in leaf node can be compressed by sharing common prefixes ©Silberschatz, Korth and Sudarshan11.44Database System Concepts - 6th Edition Bulk Loading and Bottom-Up Build  Inserting entries one-at-a-time into a B+-tree requires  1 IO per entry  assuming leaf level does not fit in memory  can be very inefficient for loading a large number of entries at a time (bulk loading)  Efficient alternative 1:  sort entries first (using efficient external-memory sort algorithms discussed later in Section 12.4)  insert in sorted order  insertion will go to existing page (or cause a split)  much improved IO performance, but most leaf nodes half full  Efficient alternative 2: Bottom-up B+-tree construction  As before sort entries  And then create tree layer-by-layer, starting with leaf level  details as an exercise  Implemented as part of bulk-load utility by most database systems ©Silberschatz, Korth and Sudarshan11.45Database System Concepts - 6th Edition B-Tree Index Files  Similar to B+-tree, but B-tree allows search-key values to appear only once; eliminates redundant storage of search keys.  Search keys in nonleaf nodes appear nowhere else in the Btree; an additional pointer field for each search key in a nonleaf node must be included.  Generalized B-tree leaf node  Nonleaf node – pointers Bi are the bucket or file record pointers. ©Silberschatz, Korth and Sudarshan11.46Database System Concepts - 6th Edition B-Tree Index File Example B-tree (above) and B+-tree (below) on same data ©Silberschatz, Korth and Sudarshan11.47Database System Concepts - 6th Edition B-Tree Index Files (Cont.)  Advantages of B-Tree indices:  May use less tree nodes than a corresponding B+-Tree.  Sometimes possible to find search-key value before reaching leaf node.  Disadvantages of B-Tree indices:  Only small fraction of all search-key values are found early  Non-leaf nodes are larger, so fan-out is reduced. Thus, B-Trees typically have greater depth than corresponding B+-Tree  Insertion and deletion more complicated than in B+-Trees  Implementation is harder than B+-Trees.  Typically, advantages of B-Trees do not out weigh disadvantages. ©Silberschatz, Korth and Sudarshan11.49Database System Concepts - 6th Edition Indices on Multiple Keys  Composite search keys are search keys containing more than one attribute  E.g. (dept_name, salary)  Lexicographic ordering: (a1, a2) < (b1, b2) if either  a1 < b1, or  a1=b1 and a2 < b2 ©Silberschatz, Korth and Sudarshan11.50Database System Concepts - 6th Edition Indices on Multiple Attributes  With the where clause where dept_name = “Finance” and salary = 80000 the index on (dept_name, salary) can be used to fetch only records that satisfy both conditions.  Using separate indices in less efficient — we may fetch many records (or pointers) that satisfy only one of the conditions.  Can also efficiently handle where dept_name = “Finance” and salary < 80000  But cannot efficiently handle where dept_name < “Finance” and balance = 80000  May fetch many records that satisfy the first but not the second condition Suppose we have an index on combined search-key (dept_name, salary). Database System Concepts, 6th Ed. ©Silberschatz, Korth and Sudarshan See www.db-book.com for conditions on re-use Hashing ©Silberschatz, Korth and Sudarshan11.53Database System Concepts - 6th Edition Static Hashing  A bucket is a unit of storage containing one or more records (a bucket is typically a disk block).  In a hash file organization we obtain the bucket of a record directly from its search-key value using a hash function.  Hash function h is a function from the set of all search-key values K to the set of all bucket addresses B.  Hash function is used to locate records for access, insertion as well as deletion.  Records with different search-key values may be mapped to the same bucket  thus entire bucket has to be searched sequentially to locate a record. ©Silberschatz, Korth and Sudarshan11.54Database System Concepts - 6th Edition Example of Hash File Organization  There are 10 buckets,  The binary representation of the ith character is assumed to be the integer i.  The hash function returns the sum of the binary representations of the characters modulo 10  E.g. h(Music) = 1 h(History) = 2 h(Physics) = 3 h(Elec. Eng.) = 3 Hash file organization of instructor file, using dept_name as key (See figure in next slide.) ©Silberschatz, Korth and Sudarshan11.55Database System Concepts - 6th Edition Example of Hash File Organization Hash file organization of instructor file, using dept_name as key (see previous slide for details). ©Silberschatz, Korth and Sudarshan11.56Database System Concepts - 6th Edition Hash Functions  Worst hash function maps all search-key values to the same bucket; this makes access time proportional to the number of search-key values in the file.  An ideal hash function is uniform, i.e., each bucket is assigned the same number of search-key values from the set of all possible values.  Ideal hash function is random, so each bucket will have the same number of records assigned to it irrespective of the actual distribution of search-key values in the file.  Typical hash functions perform computation on the internal binary representation of the search-key.  For example, for a string search-key, the binary representations of all the characters in the string could be added and the sum modulo the number of buckets could be returned. ©Silberschatz, Korth and Sudarshan11.57Database System Concepts - 6th Edition Handling of Bucket Overflows  Bucket overflow can occur because of  Insufficient buckets  Skew in distribution of records. This can occur due to two reasons:  multiple records have same search-key value  chosen hash function produces non-uniform distribution of key values  Although the probability of bucket overflow can be reduced, it cannot be eliminated; it is handled by using overflow buckets. ©Silberschatz, Korth and Sudarshan11.58Database System Concepts - 6th Edition Handling of Bucket Overflows (Cont.)  Overflow chaining – the overflow buckets of a given bucket are chained together in a linked list.  Above scheme is called closed hashing.  An alternative, called open hashing, which does not use overflow buckets, is not suitable for database applications. ©Silberschatz, Korth and Sudarshan11.59Database System Concepts - 6th Edition Hash Indices  Hashing can be used not only for file organization, but also for indexstructure creation.  A hash index organizes the search keys, with their associated record pointers, into a hash file structure.  Strictly speaking, hash indices are always secondary indices  if the file itself is organized using hashing, a separate primary hash index on it using the same search-key is unnecessary.  However, we use the term hash index to refer to both secondary index structures and hash organized files. ©Silberschatz, Korth and Sudarshan11.60Database System Concepts - 6th Edition Example of Hash Index hash index on instructor, on attribute ID ©Silberschatz, Korth and Sudarshan11.61Database System Concepts - 6th Edition Deficiencies of Static Hashing  In static hashing, function h maps search-key values to a fixed set of B bucket addresses. Databases grow or shrink with time.  If initial number of buckets is too small, and file grows, performance will degrade due to too much overflows.  If space is allocated for anticipated growth, a significant amount of space will be wasted initially (and buckets will be underfilled).  If database shrinks, again space will be wasted.  One solution: periodic re-organization of the file with a new hash function  Expensive, disrupts normal operations  Better solution: allow the number of buckets to be modified dynamically. ©Silberschatz, Korth and Sudarshan11.62Database System Concepts - 6th Edition Dynamic Hashing  Good for database that grows and shrinks in size  Allows the hash function to be modified dynamically  Extendable hashing – one form of dynamic hashing  Hash function generates values over a large range — typically b-bit integers, with b = 32.  At any time use only a prefix of the hash function to index into a table of bucket addresses.  Let the length of the prefix be i bits, 0  i  32.  Bucket address table size = 2i. Initially i = 0  Value of i grows and shrinks as the size of the database grows and shrinks.  Multiple entries in the bucket address table may point to a bucket (why?)  Thus, actual number of buckets is < 2i  The number of buckets also changes dynamically due to coalescing and splitting of buckets. ©Silberschatz, Korth and Sudarshan11.63Database System Concepts - 6th Edition General Extendable Hash Structure In this structure, i2 = i3 = i, whereas i1 = i – 1 (see next slide for details) h( ) = ©Silberschatz, Korth and Sudarshan11.64Database System Concepts - 6th Edition Use of Extendable Hash Structure  Each bucket j stores a value ij  All the entries that point to the same bucket have the same values on the first ij bits.  To locate the bucket containing search-key Kj: 1. Compute h(Kj) = X 2. Use the first i high order bits of X as a displacement into bucket address table, and follow the pointer to appropriate bucket  To insert a record with search-key value Kj  follow same procedure as look-up and locate the bucket, say j.  If there is room in the bucket j insert record in the bucket.  Else the bucket must be split and insertion re-attempted (next slide.)  Overflow buckets used instead in some cases (will see shortly) ©Silberschatz, Korth and Sudarshan11.65Database System Concepts - 6th Edition Insertion in Extendable Hash Structure (Cont)  If i > ij (more than one pointer to bucket j)  Allocate a new bucket z, and set ij = iz = (ij + 1)  Update the second half of the bucket address table entries originally pointing to j, to point to z  Remove each record in bucket j and reinsert (in j or z)  Recompute new bucket for Kj and insert record in the bucket (further splitting is required if the bucket is still full)  If i = ij (only one pointer to bucket j)  If i reaches some limit b, or too many splits have happened in this insertion, create an overflow bucket  Else  Increment i and double the size of the bucket address table.  Replace each entry in the table by two entries that point to the same bucket.  Recompute new bucket address table entry for Kj Now i > ij so use the first case above. To split a bucket j when inserting record with search-key value Kj: ©Silberschatz, Korth and Sudarshan11.66Database System Concepts - 6th Edition Deletion in Extendable Hash Structure  To delete a key value,  locate it in its bucket and remove it.  The bucket itself can be removed if it becomes empty (with appropriate updates to the bucket address table).  Coalescing of buckets can be done (can coalesce only with a “buddy” bucket having same value of ij and same ij –1 prefix, if it is present)  Decreasing bucket address table size is also possible  Note: decreasing bucket address table size is an expensive operation and should be done only if number of buckets becomes much smaller than the size of the table ©Silberschatz, Korth and Sudarshan11.67Database System Concepts - 6th Edition Use of Extendable Hash Structure: Example ©Silberschatz, Korth and Sudarshan11.68Database System Concepts - 6th Edition Example (Cont.)  Initial Hash structure; bucket size = 2 ©Silberschatz, Korth and Sudarshan11.69Database System Concepts - 6th Edition Example (Cont.)  Hash structure after insertion of “Mozart”, “Srinivasan”, and “Wu” records ©Silberschatz, Korth and Sudarshan11.70Database System Concepts - 6th Edition Example (Cont.)  Hash structure after insertion of (22222, Einstein, Physics, 95000) record ©Silberschatz, Korth and Sudarshan11.71Database System Concepts - 6th Edition Example (Cont.)  Hash structure after insertion of Gold and El Said records ©Silberschatz, Korth and Sudarshan11.72Database System Concepts - 6th Edition Example (Cont.)  Hash structure after insertion of Katz record ©Silberschatz, Korth and Sudarshan11.73Database System Concepts - 6th Edition Example (Cont.) And after insertion of eleven records ©Silberschatz, Korth and Sudarshan11.74Database System Concepts - 6th Edition Example (Cont.) And after insertion of Kim record in previous hash structure ©Silberschatz, Korth and Sudarshan11.75Database System Concepts - 6th Edition Extendable Hashing vs. Other Schemes  Benefits of extendable hashing:  Hash performance does not degrade with growth of file  Minimal space overhead  Disadvantages of extendable hashing  Extra level of indirection to find desired record  Bucket address table may itself become very big (larger than memory)  Cannot allocate very large contiguous areas on disk either  Solution: B+-tree structure to locate desired record in bucket address table  Changing size of bucket address table is an expensive operation  Linear hashing is an alternative mechanism  Allows incremental growth of its directory (equivalent to bucket address table)  At the cost of more bucket overflows ©Silberschatz, Korth and Sudarshan11.76Database System Concepts - 6th Edition Comparison of Ordered Indexing and Hashing  Cost of periodic re-organization  Relative frequency of insertions and deletions  Is it desirable to optimize average access time at the expense of worst-case access time?  Expected type of queries:  Hashing is generally better at retrieving records having a specified value of the key.  If range (interval) queries are common, ordered indices are to be preferred  In practice:  PostgreSQL supports hash indices, but discourages use due to poor performance  Oracle supports static hash organization, but not hash indices  SQLServer supports only B+-trees ©Silberschatz, Korth and Sudarshan11.77Database System Concepts - 6th Edition Index Definition in SQL  Create an index create index on () E.g.: create index dept_index on instructor (dept_name)  Use create unique index to indirectly specify and enforce the condition that the search key is a candidate key is a candidate key.  Not really required if SQL unique integrity constraint is supported  To drop an index drop index  Most database systems allow specification of type of index, and clustering. Database System Concepts, 6th Ed. ©Silberschatz, Korth and Sudarshan See www.db-book.com for conditions on re-use End of Chapter