Bonus Assigment
Intro
Faculty of Informatics, Masaryk University
January 7, 2021
Assigment
The task of this assignment is to create a firmware that runs on
FRDM-K66 board. This firmware will have 2 tasks and set up parts.
You will not be provided with any templates, but you can use any
previous projects.
Task 1 - Load data from both ADCs.
Task 2 - display recorded data to display.(format is explained)
Setup - setup display correctly to be able to print data.
·Bonus Assigment ·January 7, 2021 2 / 6
Assigment
Dislpay Output
You will display data graphically. Instead of alphanumerical, you will
use the bar to represent a value of ADC measured value. This bar
must have 80 different states as 16 characters per line and 5 pixels
width of one character. This representation must be continuous and
must truthfully follow ADC value in reasonable rate. (at least 10Hz
but no more than 50Hz)
·Bonus Assigment ·January 7, 2021 3 / 6
Assigment
ADC
ADC value must be sampled exactly 6 times in between every frame.
The sampling must be equally dispersed throughout this period.
When printing to the display use average of those 6 values.
·Bonus Assigment ·January 7, 2021 4 / 6
Assigment
Setup
Hardware is connected the same way as in week 10.
Display setup.- Characters needed to display data are not present in
the driver by default.
Your task is to implement the functionality of saving new characters
to display. This process is described in the display driver
documentation. It is part of the assignment to look for this
information.
·Bonus Assigment ·January 7, 2021 5 / 6
Assigment
Submition
To submit bonus project, please use new branch and use TAG:
HW_bonus_1 (in case of multiple submissions increment number)
When you submitted your solution. Write an e-mail to teachers(at
least two people) to check your solution. Your solution will be
corrected in a one-week period.
Deadline: end of the exam period. (If submitted too late there might
be no time for resubmission)
·Bonus Assigment ·January 7, 2021 6 / 6