Industrial Corona Pre- and Post-treatment for Enhanced Silicone
Coating of Paper used as Release Liner

D 2018

Industrial Corona Pre- and Post-treatment for Enhanced Silicone Coating of Paper used as Release Liner

ŠTĚPÁNOVÁ, Vlasta, Dušan KOVÁČIK, Oleksandr GALMIZ, Zlata TUČEKOVÁ, Miroslav ZEMÁNEK et. al.

Basic information

Original name

Industrial Corona Pre- and Post-treatment for Enhanced Silicone Coating of Paper used as Release Liner

Authors

ŠTĚPÁNOVÁ, Vlasta (203 Czech Republic, guarantor, belonging to the institution), Dušan KOVÁČIK (703 Slovakia, belonging to the institution), Oleksandr GALMIZ (804 Ukraine, belonging to the institution), Zlata TUČEKOVÁ (703 Slovakia, belonging to the institution), Miroslav ZEMÁNEK (203 Czech Republic, belonging to the institution), Monika STUPAVSKÁ (703 Slovakia, belonging to the institution), Jakub KELAR (203 Czech Republic, belonging to the institution), Julien VALLADE (250 France) and Mirko ČERNÁK (703 Slovakia, belonging to the institution)

Edition

Brno, 9th International Conference on Nanomaterials - Reseach & Application (NANOCON), p. 271-276, 6 pp. 2018

Publisher

TANGER Ltd., Ostrava

Other information

Language

English

Type of outcome

Stať ve sborníku

Field of Study

10305 Fluids and plasma physics

Country of publisher

Czech Republic

Confidentiality degree

není předmětem státního či obchodního tajemství

Publication form

storage medium (CD, DVD, flash disk)

References:

URL

RIV identification code

RIV/00216224:14310/18:00114984

Organization unit

Faculty of Science

ISBN

978-80-87294-81-9

UT WoS

000452823300045

Keywords in English

release liner paper; atmospheric pressure plasma; industrial corona; silicone coating; adhesion

Abstract

V originále

In this work, atmospheric pressure, ambient air plasma was used for pre-treatment of clay coated paper before silicone coating as well as for post-treatment to prepare the release liner with low adhesion. As a plasma source “industrial corona” in roll-to-roll configuration was used for plasma treatment. The aim of the study was to evaluate the effect of plasma pre- and post-treatment time on adhesive properties of silicone layer sprayed on the paper. Plasma pre-treated paper was sprayed with silicone oil of different amounts using spray gun and subsequently plasma post-treated for defined repetition. Surface of silicone sprayed paper was analyzed by water contact angle measurement immediately after oil spraying procedure. The possible changes in morphology were characterized by scanning electron microscopy, chemical composition by X-ray photoelectron spectroscopy and the adhesion by measuring tape peel force. The silicone coated paper was characterized by increase of hydrophobicity and decrease of release factor with significant impact of plasma post-treatment.

Links

LO1411, research and development project

Name: Rozvoj centra pro nízkonákladové plazmové a nanotechnologické povrchové úpravy (Acronym: CEPLANT plus)

Investor: Ministry of Education, Youth and Sports of the CR

7D16003, research and development project

Name: Ekologický PECVD in-line povlakovací proces pro speciální papíry pro komerční užití (Acronym: CEZANNE)

Investor: Ministry of Education, Youth and Sports of the CR

Citovat

ŠTĚPÁNOVÁ, Vlasta, Dušan KOVÁČIK, Oleksandr GALMIZ, Zlata TUČEKOVÁ, Miroslav ZEMÁNEK, Monika STUPAVSKÁ, Jakub KELAR, Julien VALLADE and Mirko ČERNÁK. Industrial Corona Pre- and Post-treatment for Enhanced Silicone Coating of Paper used as Release Liner. In 9th International Conference on Nanomaterials - Reseach & Application (NANOCON). Brno: TANGER Ltd., Ostrava, 2018, p. 271-276. ISBN 978-80-87294-81-9.

@inproceedings{1393079,
   author = {Štěpánová, Vlasta and Kováčik, Dušan and Galmiz, Oleksandr and Tučeková, Zlata and Zemánek, Miroslav and Stupavská, Monika and Kelar, Jakub and Vallade, Julien and Černák, Mirko},
   address = {Brno},
   booktitle = {9th International Conference on Nanomaterials - Reseach & Application (NANOCON)},
   keywords = {release liner paper; atmospheric pressure plasma; industrial corona; silicone coating; adhesion},
   howpublished = {paměťový nosič},
   language = {eng},
   location = {Brno},
   isbn = {978-80-87294-81-9},
   pages = {271-276},
   publisher = {TANGER Ltd., Ostrava},
   title = {Industrial Corona Pre- and Post-treatment for Enhanced Silicone Coating of Paper used as Release Liner},
   url = {https://www.confer.cz/nanocon/2017/read/329-industrial-corona-pre-and-post-treatment-for-enhanced-silicone-coating-of-paper-used-as-release-liner.pdf},
   year = {2018}
}

TY  - JOUR
ID  - 1393079
AU  - Štěpánová, Vlasta - Kováčik, Dušan - Galmiz, Oleksandr - Tučeková, Zlata - Zemánek, Miroslav - Stupavská, Monika - Kelar, Jakub - Vallade, Julien - Černák, Mirko
PY  - 2018
TI  - Industrial Corona Pre- and Post-treatment for Enhanced Silicone Coating of Paper used as Release Liner
PB  - TANGER Ltd., Ostrava
CY  - Brno
SN  - 9788087294819
KW  - release liner paper
KW  - atmospheric pressure plasma
KW  - industrial corona
KW  - silicone coating
KW  - adhesion
UR  - https://www.confer.cz/nanocon/2017/read/329-industrial-corona-pre-and-post-treatment-for-enhanced-silicone-coating-of-paper-used-as-release-liner.pdf
N2  - In this work, atmospheric pressure, ambient air plasma was used for pre-treatment of clay coated paper before silicone coating as well as for post-treatment to prepare the release liner with low adhesion. As a plasma source “industrial corona” in roll-to-roll configuration was used for plasma treatment. The aim of the study was to evaluate the effect of plasma pre- and post-treatment time on adhesive properties of silicone layer sprayed on the paper. Plasma pre-treated paper was sprayed with silicone oil of different amounts using spray gun and subsequently plasma post-treated for defined repetition. Surface of silicone sprayed paper was analyzed by water contact angle measurement immediately after oil spraying procedure. The possible changes in morphology were characterized by scanning electron microscopy, chemical composition by X-ray photoelectron spectroscopy and the adhesion by measuring tape peel force. The silicone coated paper was characterized by increase of hydrophobicity and decrease of release factor with significant impact of plasma post-treatment.
ER  -

ŠTĚPÁNOVÁ, Vlasta, Dušan KOVÁČIK, Oleksandr GALMIZ, Zlata TUČEKOVÁ, Miroslav ZEMÁNEK, Monika STUPAVSKÁ, Jakub KELAR, Julien VALLADE and Mirko ČERNÁK. Industrial Corona Pre- and Post-treatment for Enhanced Silicone Coating of Paper used as Release Liner. In \textit{9th International Conference on Nanomaterials - Reseach \&{} Application (NANOCON)}. Brno: TANGER Ltd., Ostrava, 2018, p.~271-276. ISBN~978-80-87294-81-9.

Detailed Information on Publication Record