Other formats:
BibTeX
LaTeX
RIS
@article{1393660, author = {Kejík, Martin and Moravec, Zdeněk and Barnes, Craig E and Pinkas, Jiří}, article_location = {AMSTERDAM}, article_number = {March}, doi = {http://dx.doi.org/10.1016/j.micromeso.2016.11.012}, keywords = {Sol-gel; Non-hydrolytic condensation; Acetic acid elimination; Microporous; Mesoporous; Hybrid; Organosilicates}, language = {eng}, issn = {1387-1811}, journal = {MICROPOROUS AND MESOPOROUS MATERIALS}, title = {Hybrid microporous and mesoporous organosilicate covalent polymers with high porosity}, volume = {240}, year = {2017} }
TY - JOUR ID - 1393660 AU - Kejík, Martin - Moravec, Zdeněk - Barnes, Craig E - Pinkas, Jiří PY - 2017 TI - Hybrid microporous and mesoporous organosilicate covalent polymers with high porosity JF - MICROPOROUS AND MESOPOROUS MATERIALS VL - 240 IS - March SP - 205-215 EP - 205-215 PB - ELSEVIER SCIENCE BV SN - 13871811 KW - Sol-gel KW - Non-hydrolytic condensation KW - Acetic acid elimination KW - Microporous KW - Mesoporous KW - Hybrid KW - Organosilicates N2 - A novel non-hydrolytic sol-gel synthesis of hybrid organosilicates is reported allowing control of micro/mesoporous character of the xerogels by variation of the silicon precursor. The polycondensation reaction of silicon(IV) acetate, Si(OAc)(4), with 1,3,5-trihydroxybenzene (THB) in dry dioxane at 100 degrees C produces acetic acid and highly porous amorphous aromatic organosilicate xerogels. Their apparent BET surface areas are as high as 990 m(2) g(-1) and the total pore volume is 0.843 cm(3) g-1. These materials are mostly microporous with a low abundance of mesopores and an average pore size of 3.5 nm. The reaction of HSi(OAc)(3) with THB produced a novel mesoporous material with properties superior to xerogels obtained from Si(OAc)(4). The BET surface area of 933 m(2) g(-1) is retained upon heating and average pore size reached 6.0 nm. The total pore volume of 1.36 cm(3) g(-1) is the highest value achieved in porous aromatic organosilicates so far and is comparable to values typical for 3D covalent organic networks (COFs). The materials are stable up to 400-500 degrees C but they are sensitive to hydrolysis in moist air. The reactions of other silicon precursors (MeSi(OAc)(3) and (BuSi)-Bu-t(OAc)(3)) and larger polyphenol connectors, 1,3,5-tris(4 '-hydroxyphenyl)benzene (THPB), 2,4,6-tris(4 '-hydroxyphenyl)-1,3,5-triazine (THPTA), and 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP), produced materials with less satisfactory properties. (C) 2016 Elsevier Inc. All rights reserved. ER -
KEJÍK, Martin, Zdeněk MORAVEC, Craig E BARNES and Jiří PINKAS. Hybrid microporous and mesoporous organosilicate covalent polymers with high porosity. \textit{MICROPOROUS AND MESOPOROUS MATERIALS}. AMSTERDAM: ELSEVIER SCIENCE BV, 2017, vol.~240, March, p.~205-215. ISSN~1387-1811. Available from: https://dx.doi.org/10.1016/j.micromeso.2016.11.012.
|