| ŠTĚPÁNOVÁ, Vlasta, Dušan KOVÁČIK, Miroslav ZEMÁNEK, Monika STUPAVSKÁ, Zlata KELAR TUČEKOVÁ a Mirko ČERNÁK. Surface modification of clay-coated paper by atmospheric-pressure plasma in air. Online. Surface and Interface Analysis. Hoboken (New Jersey, USA): Wiley, 2020, roč. 52, č. 12, s. 840-844. ISSN 0142-2421. Dostupné z: https://dx.doi.org/10.1002/sia.6798. [citováno 2024-04-24] |
Další formáty:
BibTeX
LaTeX
RIS
@article{1660416,
author = {Štěpánová, Vlasta and Kováčik, Dušan and Zemánek, Miroslav and Stupavská, Monika and Kelar Tučeková, Zlata and Černák, Mirko},
article_location = {Hoboken (New Jersey, USA)},
article_number = {12},
doi = {http://dx.doi.org/10.1002/sia.6798},
keywords = {ageing effect; clay-coated paper; industrial corona; plasma treatment; release liner; surface wettability changes},
language = {eng},
issn = {0142-2421},
journal = {Surface and Interface Analysis},
title = {Surface modification of clay-coated paper by atmospheric-pressure plasma in air},
url = {https://onlinelibrary.wiley.com/doi/10.1002/sia.6798},
volume = {52},
year = {2020}
}
TY - JOUR
ID - 1660416
AU - Štěpánová, Vlasta - Kováčik, Dušan - Zemánek, Miroslav - Stupavská, Monika - Kelar Tučeková, Zlata - Černák, Mirko
PY - 2020
TI - Surface modification of clay-coated paper by atmospheric-pressure plasma in air
JF - Surface and Interface Analysis
VL - 52
IS - 12
SP - 840-844
EP - 840-844
PB - Wiley
SN - 01422421
KW - ageing effect
KW - clay-coated paper
KW - industrial corona
KW - plasma treatment
KW - release liner
KW - surface wettability changes
UR - https://onlinelibrary.wiley.com/doi/10.1002/sia.6798
L2 - https://onlinelibrary.wiley.com/doi/10.1002/sia.6798
N2 - The aim of this work was the wettability improvement of clay-coated paper by ambient air plasma exposure. Industrial corona with a volume dielectric barrier discharge in cylindrical configuration was used as a plasma source; the exposure times varied from 0.25 up to 5 s. Water contact angle (WCA) measurement and surface free energy (SFE) evaluation were carried out for the estimation of wettability changes. Plasma treatment in the duration of 0.25 s was sufficient to decrease the WCA almost to the half of the original value, which was 76 degrees. SFE of paper has increased by 40%-50% after plasma treatment. Long-term ageing effect study of treated samples was carried out up to 3 months after the treatment. WCA did not reach the original value even after 3 months, and it was still 20%-30% lower. O/C ratio increased from 0.7 to 1.8 in case of 5-s plasma treatment, and the new chemical bonds (C=O, O-C=O) were created on the surface.
ER -
ŠTĚPÁNOVÁ, Vlasta, Dušan KOVÁČIK, Miroslav ZEMÁNEK, Monika STUPAVSKÁ, Zlata KELAR TUČEKOVÁ a Mirko ČERNÁK. Surface modification of clay-coated paper by atmospheric-pressure plasma in air. Online. \textit{Surface and Interface Analysis}. Hoboken (New Jersey, USA): Wiley, 2020, roč.~52, č.~12, s.~840-844. ISSN~0142-2421. Dostupné z: https://dx.doi.org/10.1002/sia.6798. [citováno 2024-04-24]
|
