Other formats:
BibTeX
LaTeX
RIS
@article{1688888, author = {Kroker, Michael and Souček, Pavel and Matej, Pavol and Zábranský, Lukáš and Czigány, Zsolt and Balazsi, Katalin and Vašina, Petr}, article_location = {Basel}, article_number = {9}, doi = {http://dx.doi.org/10.3390/coatings10090853}, keywords = {magnetron sputtering; industrial process; segmented target; TaBC; phase composition; structure; mechanical properties}, language = {eng}, issn = {2079-6412}, journal = {Coatings}, title = {Composition, Structure and Mechanical Properties of Industrially Sputtered Ta-B-C Coatings}, url = {https://doi.org/10.3390/coatings10090853}, volume = {10}, year = {2020} }
TY - JOUR ID - 1688888 AU - Kroker, Michael - Souček, Pavel - Matej, Pavol - Zábranský, Lukáš - Czigány, Zsolt - Balazsi, Katalin - Vašina, Petr PY - 2020 TI - Composition, Structure and Mechanical Properties of Industrially Sputtered Ta-B-C Coatings JF - Coatings VL - 10 IS - 9 SP - 1-18 EP - 1-18 PB - MDPI SN - 20796412 KW - magnetron sputtering KW - industrial process KW - segmented target KW - TaBC KW - phase composition KW - structure KW - mechanical properties UR - https://doi.org/10.3390/coatings10090853 L2 - https://doi.org/10.3390/coatings10090853 N2 - Ta-B-C coatings were non-reactively sputter-deposited in an industrial batch coater from a single segmented rotating cylindrical cathode employing a combinatorial approach. The chemical composition, morphology, microstructure, mechanical properties, and fracture resistance of the coatings were investigated. Their mechanical properties were linked to their microstructure and phase composition. Coatings placed stationary in front of the racetrack of the target and those performing a 1-axis rotation around the substrate carousel are compared. Utilization of the substrate rotation has no significant effect on the chemical composition of the coatings deposited at the same position compared to the cathode. Whereas the morphology of coatings with corresponding chemical composition is similar for stationary as well as rotating samples, the rotating coatings exhibit a distinct multilayered structure with a repetition period in the range of nanometers despite utilizing a non-reactive process and a single sputter source. All the coatings are either amorphous, nanocomposite or nanocrystalline depending on their chemical composition. The presence of TaC, TaB, and/or TaB2phases is identified. The crystallite size is typically less than 5 nm. The highest hardness of the coatings is associated with the presence of larger grains in a nanocomposite structure or formation of polycrystalline coatings. The number, density, and length of cracks observed after high-load indentation is on par with current optimized commercially available protective coatings. ER -
KROKER, Michael, Pavel SOUČEK, Pavol MATEJ, Lukáš ZÁBRANSKÝ, Zsolt CZIGÁNY, Katalin BALAZSI and Petr VAŠINA. Composition, Structure and Mechanical Properties of Industrially Sputtered Ta-B-C Coatings. \textit{Coatings}. Basel: MDPI, 2020, vol.~10, No~9, p.~1-18. ISSN~2079-6412. Available from: https://dx.doi.org/10.3390/coatings10090853.
|