Effect of Milling Methods on Particulate Properties and
Structure of Clinoptilolite

J 2020

Effect of Milling Methods on Particulate Properties and Structure of Clinoptilolite

NGUYEN, Vinh Dinh; Quy Minh BUI; Jindřich KYNICKÝ a Dalibor VŠIANSKÝ

Základní údaje

Originální název

Effect of Milling Methods on Particulate Properties and Structure of Clinoptilolite

Autoři

NGUYEN, Vinh Dinh (garant); Quy Minh BUI; Jindřich KYNICKÝ a Dalibor VŠIANSKÝ (203 Česká republika, domácí)

Vydání

Crystal Research and Technology, Berlin, A Wiley-VCH Berlin Publication, 2020, 0232-1300

Další údaje

Jazyk

angličtina

Typ výsledku

Článek v odborném periodiku

Obor

10406 Analytical chemistry

Stát vydavatele

Německo

Utajení

není předmětem státního či obchodního tajemství

Odkazy

URL

Impakt faktor

Impact factor: 1.639

Kód RIV

RIV/00216224:14310/20:00116905

Organizační jednotka

Přírodovědecká fakulta

DOI

https://doi.org/10.1002/crat.201900180

UT WoS

000515138600001

EID Scopus

2-s2.0-85083538097

Klíčová slova anglicky

ball milling; clinoptilolite; particle size; ultrasonic milling; vibro-milling

Štítky

rivok

Příznaky

Mezinárodní význam, Recenzováno

Změněno: 11. 11. 2020 10:34, Mgr. Marie Novosadová Šípková, DiS.

Anotace

V originále

The effects of ultrasonic milling, dry and wet ball milling, and vibro-milling on the particulate properties, crystalline characteristics, morphology, and surface area of clinoptilolite (Cpt) have been investigated. Laser beam scattering technique, X-ray diffraction (XRD), scanning electron microscopy (SEM), and nitrogen adsorption/desorption at 77 K are used to characterize the initial and ground Cpt powders. Results show that Cpt particle size is significantly reduced by all carried out milling methods in which vibro-milling could produce particles with diameter less than 100 nm. The size distribution of Cpt is remarkably narrowed by using vibro- and wet ball milling. The crystallinity of Cpt noticeably decreases for the samples obtained by ball milling while vibro- and ultrasonic millings show a negligible effect on crystallinity. The specific surface area of Cpt is enhanced by all four milling methods.

Citovat

NGUYEN, Vinh Dinh; Quy Minh BUI; Jindřich KYNICKÝ a Dalibor VŠIANSKÝ. Effect of Milling Methods on Particulate Properties and Structure of Clinoptilolite. Crystal Research and Technology. Berlin: A Wiley-VCH Berlin Publication, 2020, roč. 55, č. 4, s. 1-6. ISSN 0232-1300. Dostupné z: https://doi.org/10.1002/crat.201900180.

@article{1692058,
   author = {Nguyen, Vinh Dinh and Bui, Quy Minh and Kynický, Jindřich and Všianský, Dalibor},
   article_location = {Berlin},
   article_number = {4},
   doi = {https://doi.org/10.1002/crat.201900180},
   keywords = {ball milling; clinoptilolite; particle size; ultrasonic milling; vibro-milling},
   language = {eng},
   issn = {0232-1300},
   journal = {Crystal Research and Technology},
   title = {Effect of Milling Methods on Particulate Properties and Structure of Clinoptilolite},
   url = {https://doi.org/10.1002/crat.201900180},
   volume = {55},
   year = {2020}
}

TY  - JOUR
ID  - 1692058
AU  - Nguyen, Vinh Dinh - Bui, Quy Minh - Kynický, Jindřich - Všianský, Dalibor
PY  - 2020
TI  - Effect of Milling Methods on Particulate Properties and Structure of Clinoptilolite
JF  - Crystal Research and Technology
VL  - 55
IS  - 4
SP  - 1-6
EP  - 1-6
PB  - A Wiley-VCH Berlin Publication
SN  - 02321300
KW  - ball milling
KW  - clinoptilolite
KW  - particle size
KW  - ultrasonic milling
KW  - vibro-milling
UR  - https://doi.org/10.1002/crat.201900180
L2  - https://doi.org/10.1002/crat.201900180
N2  - The effects of ultrasonic milling, dry and wet ball milling, and vibro-milling on the particulate properties, crystalline characteristics, morphology, and surface area of clinoptilolite (Cpt) have been investigated. Laser beam scattering technique, X-ray diffraction (XRD), scanning electron microscopy (SEM), and nitrogen adsorption/desorption at 77 K are used to characterize the initial and ground Cpt powders. Results show that Cpt particle size is significantly reduced by all carried out milling methods in which vibro-milling could produce particles with diameter less than 100 nm. The size distribution of Cpt is remarkably narrowed by using vibro- and wet ball milling. The crystallinity of Cpt noticeably decreases for the samples obtained by ball milling while vibro- and ultrasonic millings show a negligible effect on crystallinity. The specific surface area of Cpt is enhanced by all four milling methods.
ER  -

NGUYEN, Vinh Dinh; Quy Minh BUI; Jindřich KYNICKÝ a Dalibor VŠIANSKÝ. Effect of Milling Methods on Particulate Properties and Structure of Clinoptilolite. \textit{Crystal Research and Technology}. Berlin: A Wiley-VCH Berlin Publication, 2020, roč.~55, č.~4, s.~1-6. ISSN~0232-1300. Dostupné z: https://doi.org/10.1002/crat.201900180.

Přehled o publikaci