GALMIZ, Oleksandr, David PAVLIŇÁK, Michal FLEISCHER, Jakub KELAR, Dušan KOVÁČIK, Mirko ČERNÁK a Lenka MYNÁŘOVÁ. Nanofibers layer deposited on the polypropylene non-woven textile for water filters production with the enhanced properties due to potential implementation of plasma technology to the manufacturing process. 2021.
Další formáty:   BibTeX LaTeX RIS
Základní údaje
Originální název Nanofibers layer deposited on the polypropylene non-woven textile for water filters production with the enhanced properties due to potential implementation of plasma technology to the manufacturing process
Název česky Depozice nanovlákenných vrstev na polypropylenovou netkanou textilii k výrobě vodních filtů s vylepšenými vlastnostmi díky implementaci plazmových technologií do výrobního procesu
Autoři GALMIZ, Oleksandr (804 Ukrajina, domácí), David PAVLIŇÁK (203 Česká republika, domácí), Michal FLEISCHER (703 Slovensko, domácí), Jakub KELAR (203 Česká republika, domácí), Dušan KOVÁČIK (703 Slovensko, domácí), Mirko ČERNÁK (703 Slovensko, garant, domácí) a Lenka MYNÁŘOVÁ.
Vydání 2021.
Další údaje
Originální jazyk angličtina
Typ výsledku Technicky realizované výsledky (prototyp, funkční vzorek)
Obor 10305 Fluids and plasma physics
Stát vydavatele Česká republika
Utajení není předmětem státního či obchodního tajemství
Kód RIV RIV/00216224:14310/21:00124328
Organizační jednotka Přírodovědecká fakulta
Klíčová slova česky atmosférické plazma; vodní filtry; kontinuální úprava
Klíčová slova anglicky atmospheric pressure plasma; water filters; continual treatment
Technické parametry The carrier fabric and nanofibers were processed using planar DCSBD electrodes. Plasma was generated in the form of a surface dielectric barrier discharge in air at atmospheric pressure at a supplied H V of 15-20 kHz frequency and 20 kV peak-to-peak voltage. The tested power of the DCSBD was 400 W. Two DCSBD electrodes were installed on the spinning line before the Nanospider machine (pretreatment) and two after the Nanospider machine (post-treatment).
Změnil Změnila: Mgr. Marie Šípková, DiS., učo 437722. Změněno: 24. 3. 2022 11:55.
Anotace
The aim of this functional sample was to perform a set of plasma treatment tests on Polypropylene Spunbond (PP SB) 30 gsm non-woven textile in order to enhance their properties for future use as water filter parts. A Diffuse Coplanar Surface Barrier Discharge (DCSBD) was used as a plasma source and was tested on the industrial manufacturing line.
Návaznosti
E01-14, interní kód MUNázev: In-line plasma technology for a large throughput manufacturing of advanced nanofiber-based filter fabrics (Akronym: Plasma Nanotex)
Investor: Evropská unie, In-line plasma technology for a large throughput manufacturing of advanced nanofiber-based filter fabrics
VytisknoutZobrazeno: 29. 3. 2024 12:04