The study of drift in inductively coupled plasma optical emission spectrometry. Analysis of silicate and carbonate raw materials.

KANICKÝ, Viktor. The study of drift in inductively coupled plasma optical emission spectrometry. Analysis of silicate and carbonate raw materials. Collection of Czechoslovak Chemical Communications. Prague: Inst Org Chem Biochem Czech Acad Sci, 1993, roč. 58, č. 12, s. 2905-2917. ISSN 0010-0765.

Základní údaje

• Originální název: The study of drift in inductively coupled plasma optical emission spectrometry. Analysis of silicate and carbonate raw materials.
• Autoři: KANICKÝ, Viktor (203 Česká republika, garant).
• Vydání: Collection of Czechoslovak Chemical Communications, Prague, Inst Org Chem Biochem Czech Acad Sci, 1993, 0010-0765.

Další údaje

• Originální jazyk: angličtina
• Typ výsledku: Článek v odborném periodiku
• Obor: 10406 Analytical chemistry
• Stát vydavatele: Česká republika
• Utajení: není předmětem státního či obchodního tajemství
• Organizační jednotka: Přírodovědecká fakulta
• Klíčová slova anglicky: internal standard; noise
• Štítky: Internal standard, noise
• Příznaky: Recenzováno

Anotace

The work shows the importance of maintaining a constant temperature in a spray chamber to obtain a stable signal in the ICP spectrometry of water solutions. Simple shielding against ICP thermal radiation and forced air circulation in a plasma torch/spray chamber housing have been proposed and used instead of a double-wall temperature-controlled spray chamber. The internal standard method has been used to improve signal stability. The number and composition of calibration solutions have been optimized for the determination of the main constituents of some silicate and carbonate raw materials. An ultrasonic cleaning bath has been successfully used instead of stirring to dissolve the samples after fusion with LiBO2. Certified Czech and Slovak geological reference materials and some international standards have been used to test the accuracy. Statistical tests have proved that the method of determination complies with the requirements of technological standards.

Anotace česky

The work shows the importance of maintaining a constant temperature in a spray chamber to obtain a stable signal in the ICP spectrometry of water solutions. Simple shielding against ICP thermal radiation and forced air circulation in a plasma torch/spray chamber housing have been proposed and used instead of a double-wall temperature-controlled spray chamber. The internal standard method has been used to improve signal stability. The number and composition of calibration solutions have been optimized for the determination of the main constituents of some silicate and carbonate raw materials. An ultrasonic cleaning bath has been successfully used instead of stirring to dissolve the samples after fusion with LiBO2. Certified Czech and Slovak geological reference materials and some international standards have been used to test the accuracy. Statistical tests have proved that the method of determination complies with the requirements of technological standards.