J 2024

Optical characterization of inhomogeneity of polymer-like thin films arising in the initial phase of plasma-enhanced chemical vapor deposition

DVOŘÁK, Jan, Jiří VOHÁNKA, Vilma BURŠÍKOVÁ and Ivan OHLÍDAL

Basic information

Original name

Optical characterization of inhomogeneity of polymer-like thin films arising in the initial phase of plasma-enhanced chemical vapor deposition

Authors

DVOŘÁK, Jan (203 Czech Republic, guarantor, belonging to the institution), Jiří VOHÁNKA (203 Czech Republic, belonging to the institution), Vilma BURŠÍKOVÁ (203 Czech Republic, belonging to the institution) and Ivan OHLÍDAL (203 Czech Republic, belonging to the institution)

Edition

Heliyon, Elsevier Ltd, 2024, 2405-8440

Other information

Language

English

Type of outcome

Článek v odborném periodiku

Field of Study

10305 Fluids and plasma physics

Country of publisher

United Kingdom of Great Britain and Northern Ireland

Confidentiality degree

není předmětem státního či obchodního tajemství

References:

Impact factor

Impact factor: 4.000 in 2022

Organization unit

Faculty of Science

UT WoS

001222776100001

Keywords in English

Ellipsometry; Reflectometry; Optical characterization; Polymer-like thin films; Plasma polymer; Inhomogeneity

Tags

Tags

International impact, Reviewed
Změněno: 11/10/2024 13:56, Mgr. Marie Šípková, DiS.

Abstract

V originále

In this study, an optical investigation in a wide spectral range of polymer-like (SiOxCyHz) thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) is presented. The primary focus is on assessing the homogeneity of the grown films. Within the PECVD, it is possible to alter the properties of the deposited material by continually adjusting deposition process parameters and hence allow for the growth of inhomogeneous layers. However, as shown in this study, the growth of homogeneous layers could be similarly challenging. This challenge is especially pronounced at the beginning of the deposition process, where it is necessary to consider the influence of the substrate among other factors, as even slight variations in the deposition conditions can lead to the formation of inhomogeneous layers. Several series of polymer-like thin films were deposited onto silicon substrates with the goal of producing homogeneous layers, i.e. all deposition parameters were held constant. These samples were optically characterized with a special interest in homogeneity, especially at the beginning of the growth. It was found that initial inhomogeneous growth is always present. The thickness of the initial inhomogeneous part was found to be surprisingly large.

Links

LM2023039, research and development project
Name: Centrum výzkumu a vývoje plazmatu a nanotechnologických povrchových úprav
Investor: Ministry of Education, Youth and Sports of the CR