Other formats:
BibTeX
LaTeX
RIS
@article{366111,
author = {Kanický, Viktor and Otruba, Vítězslav and Novotný, Karel and Musil, Petr and Mermet, JeanandMichel},
article_location = {Berlin},
article_number = {4},
keywords = {Laser ablation; Infrared laser; Inductively coupled plasma; Atomic emission spectrometry; Steel; LINA},
language = {eng},
issn = {0937-0633},
journal = {Fresenius Journal of Analytical Chemistry},
title = {Calibration graphs for steels by IR laser ablation inductively coupled plasma atomic emission spectrometry},
volume = {370},
year = {2001}
}
TY - JOUR
ID - 366111
AU - Kanický, Viktor - Otruba, Vítězslav - Novotný, Karel - Musil, Petr - Mermet, Jean-Michel
PY - 2001
TI - Calibration graphs for steels by IR laser ablation inductively coupled plasma atomic emission spectrometry
JF - Fresenius Journal of Analytical Chemistry
VL - 370
IS - 4
SP - 387
EP - 387
PB - Springer-Verlag
SN - 09370633
KW - Laser ablation
KW - Infrared laser
KW - Inductively coupled plasma
KW - Atomic emission spectrometry
KW - Steel
KW - LINA
N2 - Infrared laser ablation (IR-LA) was studied as a sample introduction technique for the analysis of steels by inductively coupled plasma atomic emission spectrometry (ICP-AES).A comparison of two IR-LA-ICP-AES systems based on Q-switched nanosecond Nd:YAG lasers was performed. The beam of the Lina-SPARK Atomizer (LSA Sarl, Cully, Switzerland) based on the Surelite I-20 laser (Continuum, USA) was moved along a circle. A Perkin-Elmer Optima 3000 DV ICP system was used for emission measurement both with lateral and axial viewing modes. A laboratory-made ablation system based on the Brilliant laser (Quantel) was coupled to a Jobin-Yvon 170 Ultrace ICP (lateral viewing, polychromator part employed). A sample was rotated along a circle during ablation. Linearity of calibration plots was verified at least up to 19 % Cr and 12 % Ni without internal standardization for both LA-ICP-AES systems. Other elements were examined up to 3 % Mo, 1.5 % Mn, 1.7 % Si and 0.15 % Cu. The reproducibility was in the range 5 - 1 %RSD for a mass percentage 0.5 - 20 % of steel constituents. The relative uncertainty on centroid of a calibration line was in the range from ą 4% to ą 12% for Cr, Ni, Mn, Mo, Si, and from ą 8 % to ą 19 % for Cu. The lowest determinable quantities were calculated based on calibrated ranges. Performances of both the IR-LA-ICP-AES were comparable.
ER -
KANICKÝ, Viktor, Vítězslav OTRUBA, Karel NOVOTNÝ, Petr MUSIL and Jean-Michel MERMET. Calibration graphs for steels by IR laser ablation inductively coupled plasma atomic emission spectrometry (anglicky). \textit{Fresenius Journal of Analytical Chemistry}. Berlin: Springer-Verlag, 2001, vol.~370, No~4, p.~387-392. ISSN~0937-0633.
|
