| ZAJÍČKOVÁ, Lenka, Marek ELIÁŠ, Ondřej JAŠEK, Zuzana KUČEROVÁ, Petr SYNEK, Jiřina MATĚJKOVÁ, Magdaléna KADLEČÍKOVÁ, Mariana KLEMENTOVÁ, Jiří BURŠÍK and Anna VOJAČKOVÁ. Characterization of Carbon Nanotubes Deposited in Microwave Torch at Atmospheric Pressure. Plasma processes and polymers. Weinheim: Wiley-VCH, 2007, vol. 4, No 1, p. S245–S249, 5 pp. ISSN 1612-8850. |
Other formats:
BibTeX
LaTeX
RIS
@article{720374,
author = {Zajíčková, Lenka and Eliáš, Marek and Jašek, Ondřej and Kučerová, Zuzana and Synek, Petr and Matějková, Jiřina and Kadlečíková, Magdaléna and Klementová, Mariana and Buršík, Jiří and Vojačková, Anna},
article_location = {Weinheim},
article_number = {1},
keywords = {carbon nanotubes; microwave torch; atmospheric pressure;scanning electron microscopy;Raman spectroscopy},
language = {eng},
issn = {1612-8850},
journal = {Plasma processes and polymers},
title = {Characterization of Carbon Nanotubes Deposited in Microwave Torch at Atmospheric Pressure},
volume = {4},
year = {2007}
}
TY - JOUR
ID - 720374
AU - Zajíčková, Lenka - Eliáš, Marek - Jašek, Ondřej - Kučerová, Zuzana - Synek, Petr - Matějková, Jiřina - Kadlečíková, Magdaléna - Klementová, Mariana - Buršík, Jiří - Vojačková, Anna
PY - 2007
TI - Characterization of Carbon Nanotubes Deposited in Microwave Torch at Atmospheric Pressure
JF - Plasma processes and polymers
VL - 4
IS - 1
SP - S245–S249
EP - S245–S249
PB - Wiley-VCH
SN - 16128850
KW - carbon nanotubes
KW - microwave torch
KW - atmospheric pressure;scanning electron microscopy;Raman spectroscopy
N2 - Carbon nanotubes (CNTs) were prepared in microwave plasma torch at atmospheric pressure on the Si/SiO2 substrates with iron catalytic layer from the mixture of CH4/H2/Ar. The pretreatment phase for production of Fe nanoparticles was an integral part of the deposition. It took only few seconds and the substrate temperature reached 1 020 to 1 170 K. The stable temperature of the deposition was 870 to 950 K. Due to a spatial non - uniformity of the discharge, the prepared samples exhibited several different regions of CNTs. A blackish transition region close to the iron margins contained thin CNTs with the average diameter below 18 nm and much larger Fe particles. Most of the black deposit was a continuous film of straight standing CNTs with an average diameter of 38 nm. Iron particles of the approximately the same size were found at the nanotube tips. HRTEM showed the presence of triple-walled nanotubes with outer diameter below 5 nm. Raman spectra in the low frequency region consisted of several weak peaks assigned to RBM of thin MWNTs whereas first-order Raman peaks in the high frequency region were attributed to D, G, and D0 bands.
ER -
ZAJÍČKOVÁ, Lenka, Marek ELIÁŠ, Ondřej JAŠEK, Zuzana KUČEROVÁ, Petr SYNEK, Jiřina MATĚJKOVÁ, Magdaléna KADLEČÍKOVÁ, Mariana KLEMENTOVÁ, Jiří BURŠÍK and Anna VOJAČKOVÁ. Characterization of Carbon Nanotubes Deposited in Microwave Torch at Atmospheric Pressure. \textit{Plasma processes and polymers}. Weinheim: Wiley-VCH, 2007, vol.~4, No~1, p.~S245–S249, 5 pp. ISSN~1612-8850.
|
