Detailed Information on Publication Record
2012
SILVER NANOPARTICLES SINTERING AT LOW TEMPERATURE ON A COPPER SUBSTRATE: IN SITU CHARACTERISATION UNDER INERT ATMOSPHERE AND AIR
SOPOUŠEK, Jiří, Jiří BURŠÍK, Jakub ZÁLEŠÁK and Zbyněk PEŠINABasic information
Original name
SILVER NANOPARTICLES SINTERING AT LOW TEMPERATURE ON A COPPER SUBSTRATE: IN SITU CHARACTERISATION UNDER INERT ATMOSPHERE AND AIR
Name in Czech
Nizkoteplotní sintrace nanostříbra na substrátu mědi: In situ charakterizace za inertní atmosféry a na vzduchu
Authors
SOPOUŠEK, Jiří (203 Czech Republic, guarantor, belonging to the institution), Jiří BURŠÍK (203 Czech Republic), Jakub ZÁLEŠÁK (203 Czech Republic, belonging to the institution) and Zbyněk PEŠINA (203 Czech Republic)
Edition
Journal of Mining and Metallurgy B, Bor, Serbia, Faculty of Metallurgy, Bor, 2012, 1450-5339
Other information
Language
English
Type of outcome
Článek v odborném periodiku
Field of Study
20000 2. Engineering and Technology
Country of publisher
Serbia
Confidentiality degree
není předmětem státního či obchodního tajemství
Impact factor
Impact factor: 1.435
RIV identification code
RIV/00216224:14740/12:00057393
Organization unit
Central European Institute of Technology
UT WoS
000300798900007
Keywords (in Czech)
Thermal analysis; Silver; copper; DSC; electrical resistance; heat of sintering
Keywords in English
Termická analýza; stříbro; měď; DSC; elektrická vodivost; teplo sintrace
Tags
Tags
International impact, Reviewed
Změněno: 12/4/2013 09:15, Olga Křížová
V originále
Silver nanoparticles (Ag-NPs) were prepared by wet synthesis. The Ag-NPs suspension and the copper substrate plate were used for a preparation of substrate-nanoparticle-substrate samples. The sandwich like samples Cu/Ag/Cu were prepared and investigated in-situ at the isothermal external conditions (IEC) and inside apparatus for simultaneous thermal analysis STA409. The in-situ results of the electrical resistance were recorded during the Cu/Ag/Cu (IEC) sample preparation and heat treatment. Thermal effects of the Ag-NPs sintering between copper substrates were measured by differential scanning calorimetry (DSC) under different atmospheres. The prepared Cu/Ag/Cu sandwich samples were characterised by means of both optical and electron microscopy. The process of the low temperature sintering of the Ag-NPs was monitored using both thermogravimetry (TG) and DSC technique inside calorimeter under inert gas and under synthetic air. The exothermic heat effect of nanosilver sintering was evaluated.
In Czech
Ag nano bylo připraveno mokrou syntézou. Byly připraveny sendvičové vzorky Cu/AG-NANO/Cu. Byl měřen tepelný efekt sintrace v DSC metodou v kalorimetru. Sintrace byla sledována pod inertním plynem a v argonu.
Links
| ED1.1.00/02.0068, research and development project |
| ||
| GA106/09/0700, research and development project |
| ||
| GD106/09/H035, research and development project |
| ||
| MSM0021622410, plan (intention) |
|