A1 |
HILLMANN Carsten |
DK Recycling und Roheisen GmbH, Duisburg, Germany, EU |
The DK Process - A Solution for the By-Products of the European Steel Industry
|
Co-authors: SASSEN Karl-Josef
|
A2 |
JEZIERSKI Jan |
Silesian University of Technology, Gliwice, Poland, EU |
Analysis of the Gas-Solid Jet in Pneumatic Powder Injection Process
|
Co-authors: JANERKA Krzysztof
|
A3 |
KLAUS Pavel |
VSB - Technical University, Ostrava, Czech Republic, EU |
Electrical Properties of Flame from Methane and Oxygen Mixture
|
Co-authors: TOMČÍK Petr & MOHYLA Petr
|
A4 |
MACHOVČÁK Pavel |
VÍTKOVICE HEAVY MACHINERY a.s., Ostrava, Czech Republic, EU |
Evaluation of Chemical Heterogenity of a 90-ton Forging Ingot
|
Co-authors: OPLER A., CARBOL Z., TREFIL A., MERTA K., ZAORAL J., TKADLEČKOVÁ M. & MICHALEK K.
|
A5 |
TKADLEČKOVÁ Markéta |
VSB - Technical University, Ostrava, Czech Republic, EU |
Comparison of Numerical Results with Thermography Measurement
|
Co-authors: GRYC Karel, SOCHA Ladislav, MICHALEK Karel, KLUS Petr & MACHOVČÁK Pavel
|
A6 |
BALCAR Martin |
ŽĎAS, a.s., Ždár nad Sázavou, Czech Republic, EU |
Production and Properties of Duplex Stainless Steel Forgings
|
Co-authors: SOCHOR Libor, NOVÁK Jaroslav. MARTÍNEK Ludvík, FILA Pavel, SVATOŇ Josef, TURECKÝ Václav, MARTÍNEK Petr, PODANÝ Pavel
|
A7 |
FILA Pavel |
ŽĎAS, a.s., Žďár nad Sázavou, Czech Republic, EU |
Intensification of the EAF melting process in electric steelworks in ŽĎAS, Inc.
|
Co-authors: SUCHY Oldřich, BALCAR Martin, MARTÍNEK Ludvík & BRHEL Jaroslav
|
A8 |
VÁLEK Tomáš |
Vitkovicke slevarny Ltd., Ostrava, Czech Republic, EU |
Production of Spheroidal Graphite Iron with Core Wired for Spun Cast Rolls with High Progresive Material ICDP and HSS of Working Layer
|
Co-authors: ŠIMON Petr & STŘILKOVÁ Lucie
|
A9 |
SEBZDA Wojciech |
Politechnika Śląska, Gliwice, Poland, EU |
The Evaluation of Cast Steel Filtration Efficiency
|
Co-authors: BARTOCHA Dariusz, SUCHOŃ Jacek & BARON Czesław
|
A10 |
DUDEK Rostislav |
VSB - Technical University, Ostrava, Czech Republic, EU |
Possibilities of Experimental Study of Oxidic Melts Viscosity
|
Co-authors: ROSYPALOVÁ Silvie & DOBROVSKÝ Ľudovít
|
A11 |
SOCHA Ladislav |
VSB - Technical University, Ostrava, Czech Republic, EU |
Evaluation of Influence of Fluxing Agents for Slags and way of Desoxidation on Efficiency of Steel Desulphurization
|
Co-authors: BAŽAN Jiří, STYRNAL Petr, PILKA Václav, PIEGZA Zbygněv, MELECKÝ Jan, GRYC Karel & TKADLEČKOVÁ Markéta
|
A12 |
GRYC Karel |
VSB - Technical University, Ostrava, Czech Republic, EU |
High-Temperature Thermal Analysis of Specific Steel Grades
|
Co-authors: SMETANA Bedřich, ŽALUDOVÁ Monika, KLUS Petr, MICHALEK Karel, TKADLEČKOVÁ Markéta, DOBROVSKÁ Jana & SOCHA Ladislav
|
A13 |
ROSYPALOVÁ Silvie |
VSB - Technical University, Ostrava, Czech Republic, EU |
Influence of SiO2 on Interfacial Tension between Oxidic System and Steel
|
Co-authors: DUDEK Rostislav & DOBROVSKÁ Jana
|
A14 |
DOBROVSKÁ Jana |
VSB - Technical University, Ostrava, Czech Republic, EU |
Investigation into Segregation of Selected Elements in the Breakout Area of a Continuously Cast Steel Slab
|
Co-authors: FRANCOVÁ Hana, DOBROVSKÁ Věra, KAVIČKA František & STRÁNSKÝ Karel
|
A15 |
BUČEK Pavol |
ŽP VVC s.r.o., Podbrezová, Slovakia, EU |
Modeling and Control of Temperature Field of Continuously Cast Billet as Distributed Parameter System
|
Co-authors: TKÁČ Lukáš, ONDREJČKOVIČ Karol & HULKÓ Gabriel
|
A16 |
HNÍZDIL Milan |
Brno University of Technology, Brno, Czech Republic, EU |
Influence of Water Temperature on the Cooling Intensity during Continuous Casting and Hot Rolling
|
Co-authors: RAUDENSKÝ Miroslav
|
A17 |
KLIMEŠ Lubomír |
Brno University of Technology, Brno, Czech Republic, EU |
Influence of Chemical Composition of Cast Steel on the Temperature Field of Continuously Cast Billets
|
Co-authors: ŠTĚTINA Josef, PARILÁK Ľudovít & BUČEK Pavol
|
A18 |
KAVIČKA František |
Brno University of Technology, Brno, Czech Republic, EU |
Comparison of the Temperature Field Continuously Cast Steel Slabs of Different Chemical Composition
|
Co-authors: STRÁNSKÝ Karel, SEKANINA Bohumil, ŠTĚTINA Josef, MAUDER Tomáš, MASARIK Miloš
|
A19 |
STRÁNSKÝ Karel |
Brno University of Technology, Brno, Czech Republic, EU |
Heterogenity of the Concast Steel Slab Tightly Before the breakout
|
Co-authors: KAVIČKA František, DOBROVSKÁ Jana, MASARIK Miloš, ŠTĚTINA Josef & SEKANINA Bohumil
|
A20 |
MAUDER Tomáš |
Brno university of technology, Brno, Czech Republic, EU |
A Fuzzy Logic Approach for Optimal Control of Continuous Casting Process
|
Co-authors: ŠANDERA Čeněk, ŠTĚTINA Josef & MASARIK Miloš
|
A21 |
ŠTĚTINA Josef |
Brno University of Technology, Brno, Czech Republic, EU |
Optimization of Secondary Cooling in Order to Achieve Higher Surface Temperatures
|
Co-authors: KAVIČKA František, MAUDER Tomáš, KLIMEŠ Lubomír, MASARIK Miloš & ŠAŇA Zdeněk
|
A22 |
MASARIK Miloš |
EVRAZ VÍTKOVICE STEEL, a.s., Ostrava, Czech Republic, EU |
Possibilities of Graphical Simulation of Technological Parameters on the Machine for Continuous Casting
|
Co-authors: FRANĚK Zdeněk & ČAMEK Libor
|
A23 |
KORBÁŠ Martin |
VÍTKOVICE HEAVY MACHINERY a.s., Ostrava, Czech Republic, EU |
Sources of Hydrogen in Vacuum Caisson Equipment
|
Co-authors: RACLAVSKÝ Milan
|
A24 |
KORBÁŠ Martin |
VÍTKOVICE HEAVY MACHINERY a.s., Ostrava, Czech Republic, EU |
Change of Quantity, Sizes and Chemical Composition of Inclusions during Treatment of Steel in EAF-LF-VD Equipment
|
Co-authors: RACLAVSKÝ Milan & ČAMEK Libor
|
A25 |
JANERKA Krzysztof |
Silesian University of Technology, Gliwice, Poland, EU |
Heat up and Dissolution of Carburizers in Liquid Ferrous Alloys
|
Co-authors: BARTOCHA Dariusz, JEZIERSKI Jan & SZAJNAR Jan
|
A26 |
VLČEK Jozef |
VŠB - Technical University, Ostrava, Czech Republic, EU |
Slags from production pig iron and steel making and ways of their processing
|
Co-authors: TOMKOVÁ Václava, OVČAČÍKOVÁ Hana, VOLKOVÁ Anežka, TOPINKOVÁ Michaela, MATĚJKA Vlastimil, OVČAČÍK Filip & MICHNOVÁ Michaela
|
A27 |
BARTOCHA Dariusz |
Politechnika Śląska, Gliwice, Poland, EU |
Metallurgical and Chemical Quality of Low-Alloy Constructional Cast Steel vs. Mechanical Properties
|
Co-authors: KILARSKI Jerzy,SUCHOŃ Jacek, BARON Czesław, SZAJNAR Jan, JANERKA Krzysztof & SEBZDA Wojciech
|
B1 |
SZELIGA Danuta |
AGH University of Science and Technology, Krakow, Poland, EU |
Design of the Continuous Annealing Process for Multiphase Steel Strips
|
B2 |
SCHINDLER Ivo |
VSB - Technical University, Ostrava, Czech Republic, EU |
Phenomenological Model of Hot Deformation Resistance of the C-Mn-V-B-Type HSLA Steel
|
Co-authors: RUSH Stanislav, KAWULOK Petr, PLURA Jiří, VAŠEK Zdeněk & PACHLOPNÍK Radim
|
B3 |
KAWULOK Petr Ing. |
VSB - Technical University, Ostrava, Czech Republic, EU |
Influence of Methodology for Acquiring and Processing of Experimental Data for Determination of the Value of Activation Energy at Hot forming
|
Co-authors: MENDROK Radek, SCHINDLER Ivo, RUSZ Stanislav & KNAPIŃSKI Marcin
|
B4 |
HORSINKA Jaromír |
VSB - Technical University, Ostrava, Czech Republic, EU |
Study of the Kinetics of Static Recrystallization Using Avrami Equation and Stress Relaxation Method
|
Co-authors: KLIBER Jiří, KNAPINSKI Marcin & MAMUZIC Ilija
|
B5 |
ELIÁŠOVÁ Ivana |
University of West Bohemia, Plzeň, Czech Republic, EU |
The Influence of the Temperature of the Processing on the Final Structure of the Metal-Ceramic Compact Obtained through the Semi-Solid State
|
Co-authors: MAŠEK Bohuslav, KUSÝ Martin, SVOBODA Jiří & JIRKOVÁ Hana
|
B6 |
CHERKASHINA Tatyana |
Lipetsk State Technical University, Lipetsk, Russian Federation |
Investigation of the Rolling with Soft Reduction of Continuously Cast Billets
|
Co-authors: AKSENOV Sergey & KOSILOV Oleg
|
B7 |
KOTAS Milan |
Trinecke zelezarny, a.s., Třinec, Czech Republic, EU |
Mathematical Analysis of the Results of Continuous Torsion Test of Vanadium Microalloyed Steel
|
Co-authors: GAJDZICA Tomáš, BOŘUTA Josef & ČMIEL Karel Milan
|
B8 |
CHUMACHENKO Evgeniy |
Moscow Institute of Electronics and Mathematics (Technical University), Moscow, Russian Federation |
Optimization of Superplastic Forming Technology
|
Co-authors: AKSENOV Sergey & LOGASHINA Irina
|
B9 |
BALÁŽOVÁ Mariana |
Welding Research Institute - Industrial Institute of SR, Bratislava 3, Slovakia, EU |
Formability Evaluation of Bimetal Using Physical Simulation
|
Co-authors: KLENOTIČOVÁ Anna, BÍLIK Jozef, HRNČIAR Viliam & BRZIAK Peter
|
B10 |
TIKAL Filip |
COMTES FHT Inc., Dobrany, Czech Republic, EU |
Numerical Simulations of Effects of Furnace Lining Radiation on Batch of Various Ingots
|
Co-authors: DUCHEK Michal & BAROCH Ondřej
|
B11 |
VESELÝ Jozef |
Charles University in Prague, Praha, Czech Republic, EU |
Analysis of Slip Line Structures Investigated by AFM during In-Situ Deformation
|
Co-authors: CIESLAR Miroslav, BONNEVILLE Joël, COUPEAU Christophe & KOPEČEK Jaromír
|
B12 |
AIŠMAN David |
University of West Bohemia, Plzeň, Czech Republic, EU |
Development of Mechanical Properties and Microstructure of Thixoformed Powder Tool Steel
|
Co-authors: MAŠEK Bohuslav, JIRKOVÁ Hana, MIŠTEROVÁ Hedvika & WAGNER Martin
|
B13 |
SOBOTKA Jiří |
Technical University of Liberec, Liberec, Czech Republic, EU |
Stress State Influence on the Stress–strain Curves of Deep-drawing Material DC05
|
Co-authors: SOLFRONK Pavel, DOUBEK Pavel & ZUZÁNEK Lukáš
|
B14 |
SOLFRONK Pavel |
Technical University of Liberec, Liberec, Czech Republic, EU |
The Computational Model Influence on the Numerical Simulation Accuracy for Forming Alloy EN AW 5754
|
Co-authors: SOBOTKA Jiří, KOLNEROVÁ Michaela & ZUZÁNEK Lukáš
|
B15 |
ERIŞIR Ersoy |
Kocaeli Universitesi, Kocaeli, Turkey |
Strain Induced Precipitation in Microalloyed Steels Containing Nb, Ti and V
|
B16 |
RAUDENSKÝ Miroslav |
Brno University of Technology, Brno, Czech Republic, EU |
Minimization of Thermal Cracks of Rolls by Cooling Optimization
|
Co-authors: ZAHRADNÍK Radek
|
B17 |
ASTAKHOV Alexandr |
Lipetsk State Technical University, Lipetsk, Russian Federation |
Grinding Working Rolls of Hot Rolling Mills
|
Co-authors: KAWALEK Anna & MAZUR Igor
|
B18 |
KLIBER Jiří |
VSB - Technical University, Ostrava, Czech Republic, EU |
Impact of Pulling Forces and Friction of Deformation Resistance in Cold Rolling
|
Co-authors: MIŠUREC Josef, MAMUZIC Ilija, HORSINKA Jaromír & JUŘÍČEK Zdeněk
|
B19 |
PERNIS Rudolf |
University of Alexander Dubcek in Trencin, Trencin, Slovakia, EU |
Theoretical Calculation of the Minimum of Rolling Pressure
|
Co-authors: KASALA Jozef
|
B20 |
SMIRNOV Eugeny |
Donetsk National Technical University, Donetsk, Ukraine |
The Investigation of the Uninterruptedly-Casted Billets of Small Cross-Section with the Shape Deffect «Rhomoidity» Deformation Process in Box Passes
|
Co-authors: MINAYEV Aleksandr, SNITKO Sergey & KRASENKO Sergey
|
B21 |
TITTEL Viktor |
Technical University in Kosice, Košice, Slovakia, EU |
Effect of drawing angle size of a die on wire drawing and bunching process
|
Co-authors: ZELENAY Miroslav & KUDELAS Lubos
|
B22 |
ŠEDÁ Petra |
IoP AS CR, v. v. i., Praha, Czech Republic, EU |
Influence of Crystal Orientation on Texture Evolution of Magnesium Single Crystals after ECAP Processing
|
Co-authors: JAGER Aleš & LEJČEK Pavel
|
B23 |
MARKOV Oleg |
Donbas State Engineering Academy, Kramatorsk, Ukraine |
Investigation of the New Technological Process of Forging Large Shafts without Upsetting
|
Co-authors: OLESHKO Victor & ZLIGOREV Vitilij
|
B24 |
GREGER Miroslav |
VSB - Technical University, Ostrava, Czech Republic, EU |
New Technology Forged Heavy Crankshafts
|
Co-authors: PETRŹELA Jiří, LÁSZLÓ Vladimír, JUHAS Miroslav & CECHEL Tomáš
|
B25 |
DUCHEK Michal |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
Development of Modified Versions of 1.2343 Tool Steel
|
Co-authors: ŠUCHMANN Pavel, KREJČÍK Jiří, REŽNAR & MAREK Roman
|
B26 |
JANSTO Steven |
CBMM-Reference Metals Company, Bridgeville, United States |
Applied Metallurgy of the MicroNiobium Alloy Approach in Long and Plate Products
|
B27 |
KODZHASPIROV Georgy |
St.Petersburg State Polytechnical University, St.Petersburg, Russian Federation |
Structure Evolution and Mechanical Properties of Steel Deformed with Lärge Plastic Strains in Austenitic-Perlitic transformation Zone
|
Co-authors: RUDSKOY Andrey
|
B28 |
DÁM Karel |
ICT in Prague, Praha, Czech Republic, EU |
Ultra-Fine Grained Al-Mg-Sc Based Alloys Studied by In-Situ Transmission Electron Microscopy
|
Co-authors: LEJČEK Pavel
|
B29 |
NAIZABEKOV Abdrakhman |
Karaganda state industrial university, Temirtau, Kazakhstan |
Forming of Microstructure of the Al-Si-Fe-Mn System Alloy by Equal Channel Angular Pressing with Backpressure
|
Co-authors: ANDREYACHSHENKO Violetta & KLIBER Jiri
|
B30 |
MRŇA Libor |
Brno University of Technology, Brno, Czech Republic, EU |
Manufacturing of Solar Absorber by Unconventional Methods
|
Co-authors: LIDMILA Zdeněk, PODANÝ Kamil, FOREJT Milan & KUBÍČEK Jaroslav
|
B31 |
RUSZ Stanislav |
VSB - Technical University, Ostrava, Czech Republic, EU |
The Forming of Strip Sheet of Low Carbon Steel by DRECE Process (Dual Rolls Equal Channel Extrusion)
|
Co-authors: MICHENKA Vít, ČÍŽEK Lubomír, DONIČ Tibor, SALAJKA Michal, TYLŠAR Stanislav & KEDROŇ Jan
|
B32 |
ARGENTERO Stefano |
Centro Sviluppo Materiali S.p.A., Rome, Italy, EU |
Accumulative Roll Bonding Technology of Aluminium Alloys
|
B33 |
SOLOMONOV Konstantin |
Moscow State University of Railway Engineering (Voronezh branch), Voronezh, Russian Federation |
Application DEFORM to Simulation of Plastic Deformation
|
Co-authors: SVIRIN Viktor
|
B34 |
TURŇA Milan |
SUT in Trnava, FMST, Trnava, Slovakia, EU |
Qualitative Analysis of Joint Boundary at (high-speed) Welding of Metals by Explosion
|
Co-authors: TURŇA Ľubomír & TURŇOVÁ Zuzana
|
C1 |
DIGIANFRANCESCO Augusto |
Centro Sviluppo Materiali, Rome, Italy, EU |
Long Term Microstructural Evolution of 9-12%Cr Steel Grades for Steam Power Generation Plants
|
Co-authors: TIBERI VIPRAIO S. & VENDITTI D.i
|
C2 |
FORET Rudolf |
Brno University of Technology, Brno, Czech Republic, EU |
Redistribution of Carbon and Nitrogen in Heterogeneous Weld Joints of Creep-Resistant Steels (P91/P22)
|
C3 |
MOHYLA Petr |
Flash Steel Power, a.s., Ostrava, Czech Republic, EU |
Creep Properties of Base Material and Welded Joint of Steel P92
|
Co-authors: ŽVAKOVÁ Naděžda, ZAPLETAL Jiří & KUBOŇ Zdeněk
|
C4 |
VODÁREK Vlastimil |
VSB - Technical University, Ostrava, Czech Republic, EU |
Stability of Complex Nitrides in Heat Resistant Steels
|
C5 |
RAPOUCH Jiří |
ICT in Prague, Praha, Czech Republic, EU |
Detection of Structural Changes in Heat-Resistant Steels after Heat and Creep Strain Using Electrochemical Methods
|
Co-authors: BYSTRIANSKÝ Jaroslav & SVOBODOVÁ Marie
|
C6 |
BUNDA Zbyněk |
University of West Bohemia, Plzeň, Czech Republic, EU |
Evaluation of Residual Lifetime of Power Plant Parts
|
C7 |
ČERNÝ Ivo |
SVÚM a.s., Praha, Czech Republic, EU |
Evaluation of Fatigue Strength of 42SiCr Steel Heat Treated by Advanced Process Considering Hardness Scatter and Content of Inclusions
|
Co-authors: MIKULOVÁ Dagmar, ČIPERA Martin & SÍS Jiří
|
C8 |
LINHART Václav |
SVÚM a.s., Praha, Czech Republic, EU |
The Use of Some Surfacing Procedures for Increase of Fatigue Strength of Fretting Loaded Machinery Parts
|
Co-authors: ČIPERA Martin & MIKULOVÁ Dagmar
|
C9 |
BRUMEK Jan |
VSB - Technical University, Ostrava, Czech Republic, EU |
Fatigue Crack Growth under Mixed Mode Loading of 18CrMo4 Steel
|
Co-authors: UMEZAWA Osamu, MAREŠ Vratislav
|
C10 |
SÍS Jiří |
SVÚM a.s., Praha, Czech Republic, EU |
The Sensitivity of 42SiCr Steel to Inclusions under Fatigue Loading for Three Different Ways of Heat Treatment
|
Co-authors: ČERNÝ Ivo & MIKULOVÁ Dagmar
|
C11 |
JIRKOVÁ Hana |
University of West Bohemia, Plzeň, Czech Republic, EU |
The Effect of Advanced Thermomechanical Treatments on Mechanical Properties of Low Alloyed High Strength Steels
|
Co-authors: KUČEROVÁ Ludmila, PRUCHA Vojtěch & MAŠEK Bohuslav
|
C12 |
DLOUHÝ Jaromír |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
Accelerated Carbide Spheroidisation (ASR) in Low-Alloyed Steels
|
Co-authors: HAUSEROVÁ Daniela & NOVÝ Zbyšek
|
C13 |
HAUSEROVÁ Daniela |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
Accelerated Carbide Spheroidisation in 100CrMn6 Bearing Steel
|
Co-authors: DLOUHÝ Jaromír & NOVÝ Zbyšek
|
C14 |
GÜMÜŞ Serap |
Kocaeli University, Kocaeli, Turkey |
Dilatometric Investigations of the Effect of Heat Treatment on the Microstructure of Hot Rolled Mining Support Profile
|
Co-authors: ERİŞİR Ersoy, ZEREN Muzaffer, KÖSE Günay, FINDIK Erkut
|
C15 |
ŠEFL Václav |
ICT in Prague, Praha, Czech Republic, EU |
Effect of Copper on Mechanical and Corrosion Properties of High-Alloyed Steels
|
Co-authors: BYSTRIANSKÝ Jaroslav
|
C16 |
BYSTRIANSKÝ Jaroslav |
ICT Prague, Praha 6, Czech Republic, EU |
Assessment of High-Alloyed Refractory Materials
|
Co-authors: MATĚJKOVÁ Petra, PŘIKASKÝ Martin & ŠEFL Václav
|
C17 |
VÁŇOVÁ Petra |
VSB - Technical University, Ostrava, Czech Republic, EU |
Study of Hydrogen Embrittlement of the TRIP 800 Steels by Means of Tensile Tests at Simultaneous Hydrogen Charging
|
Co-authors: SOJKA Jaroslav, KONEČNÁ Kateřina & WENGLORZOVÁ Andrea
|
C18 |
JONŠTA Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
Evaluation of Duplex Steel Resistance to Sulfide Stress Cracking Using Tensile Test and Four-Point Bending Test
|
Co-authors: SOJKA Jaroslav, MATOCHA Karel, KONEČNÁ Kateřina & JONŠTA Zdeněk
|
C19 |
MAZANCOVÁ Eva |
VSB - Technical University, Ostrava, Czech Republic, EU |
Hydrogen Induced Cracking of Ti Clad to the 304 SS in Annealed State
|
Co-authors: OSTROUSHKO Dmytro
|
C20 |
ZUNA Petr |
CTU in Prague, Praha, Czech Republic, EU |
Kinetics of Grain Growth and Recrystallization during Forming Modes for Processing of Steel SA 508
|
Co-authors: HORNÍK Jakub, JANDOŠ František, Jaroslav Málek
|
C21 |
PARILÁK Ľudovít |
ŽP VVC,s.r.o., Podbrezová, Slovakia, EU |
Structural basis of steel grade P460N
|
Co-authors: DOMOVCOVÁ Lucia, ĎURČÍK Roman & BEVILAQUA Tomáš
|
C22 |
TURCZYN Stanislaw |
AGH University of Science and Technology, Krakow, Poland, EU |
Rolling of Advanced High Strength Steels for Automotive Industry
|
Co-authors: DZIEDZIC Michal
|
C23 |
GRAJCAR Adam |
Silesian University of Technology, Gliwice, Poland, EU |
Effect of Thermomechanical Processing on a Retained Austenite Fraction in AHSS Containing 5%Mn
|
Co-authors: OPIELA Marek
|
C24 |
RUŽIAK Ivan |
VSB - Technical University, Ostrava, Czech Republic, EU |
The Influence of Mn Steels Ageing on Heat Transfer Phenomena
|
Co-authors: MAZANCOVÁ Eva, KOŠTIAL Pavol, GAJTANSKÁ Milada & KRIŠŤÁK Ľuboš
|
C25 |
LIMOOEI Mohammad Bagher |
Islamic Azad University, Amol, Iran, Islamic Republic of |
Optimization of Properties and Structure with Addition of Titanium in Hadfield Steels
|
Co-authors: HOSSEINI Shabnam
|
C26 |
PARK JiEon |
POSCO, Pohang, Korea, Republic of |
Effect of Heat Treatment on a Ridging Phenomenon of Ferritic Stainless Steels
|
Co-authors: PARK SooHo
|
C27 |
HRNČIARIKOVÁ Helena |
Trencin University of Alexander Dubcek in Puchov, Púchov, Slovakia, EU |
Surface-Modified Austenitic Steel Used for the Thermal Mechanical Stress in the Glass Industry
|
Co-authors: TALAŠ Rastislav, ANISIMOV Evgeniy, PEŠLOVÁ Františka, VRÁBEL Peter
|
C28 |
MATHESIUSOVÁ Renáta |
University of West Bohemia, Plzeň, Czech Republic, EU |
The Differences in Quality of 18CrNiMo7-6 Steel and its Influences at Deformation after Carburizing
|
Co-authors: KŘÍŽ Antonín
|
C29 |
JURČI Peter |
STU, FMT, Trnava, Slovakia, EU |
Wear Resistance of Sub-Zero Processed Cr-V Ledeburitic Steel Vanadis 6
|
Co-authors: JANKA Leo
|
C30 |
ŽALUDOVÁ Monika |
VSB - Technical University, Ostrava, Czech Republic, EU |
Study of DTA Method Experimental Conditions and their Influence on Obtained Data of Metallic Systems
|
Co-authors: SMETANA Bedřich, ZLÁ Simona, DOBROVSKÁ Jana, GRYC Karel, MICHALEK Karel & DUDEK Rostislav
|
C31 |
KRÁL Lubomír |
IPM ASCR, v. v. i., Brno, Czech Republic, EU |
Measurement of Carbon Diffusion Coefficient - Calibration of Sputter Depth
|
Co-authors: ČERMÁK Jiř
|
C32 |
SMETANA Bedřich |
VSB - Technical University, Ostrava, Czech Republic, EU |
Possibilities of Heat Capacities Determination of Metallic Systems in the Frame of Laboratory of Thermal Analysis
|
Co-authors: ŽALUDOVÁ Monika, ZLÁ Simona, DOBROVSKÁ Jana, TKADLEČKOVÁ Markéta, KLUS Petr & ROSYPALOVÁ Silvie
|
C33 |
ATAPEK S. Hakan |
Kocaeli University, Kocaeli, Turkey |
Characterization of Microstructure and Fracture Behavior of GG20 and GG25 Cast Iron Materials Used in Valves
|
Co-authors: TASLICUKUR Z., ALTUG G. S., POLAT Ş. & TÜREDI E.
|
D1 |
JEDRZEJCZYK Dariusz |
University of Bielsko-Biala, Bielsko-Biala, Poland, EU |
Influence of the Surface State on Hot Dip Zn Galvanizing Effects of Iron Alloys
|
Co-authors: SKOTNICKI Wojciech, WEGRZYNKIEWICZ Sylwia & HAJDUGA Maciej
|
D2 |
VITRY Véronique |
University of Mons, Mons, Belgium, EU |
Initial Deposition of Electroless Nickel from Borohydride-Reduced Bath on Various Ferrous Alloys
|
Co-authors: SENS Adeline & DELAUNOIS Fabienne
|
D3 |
HAJDUGA Maciej Blazej |
University of Bielsko-Biala, Bielsko-Biala, Poland, EU |
Analysis of Ceramic Implants Surface with Golden Nano-Layer
|
Co-authors: HAJDUGA Maciej & JEDRZEJCZYK Dariusz
|
D4 |
CUTEAN Simona Elena |
UPT, Timisoara, Romania, EU |
HVOF Spraying Technique of Titanium on Steels Surfaces Components
|
Co-authors: ROSU Radu Alexandru & MITELEA Ion
|
D5 |
HRABOVSKÝ Jozef |
Brno University of Technology, Brno, Czech Republic, EU |
Influence of the Water Chamber and Position of the Stabilizer on the Impact Pressure at High Pressure Descaling
|
Co-authors: HORSKÝ Jaroslav
|
D6 |
SOŁEK Dariusz |
Med-Group, Zywiec, Poland, EU |
Galvanic Coatings as One of the Ways of Anticorrosive and Antibacterial Protection
|
Co-authors: HAJDUGA Maciej, JĘDRZEJCZYK Dariusz, WĘGRZYNKIEWICZ Sylwia & HAJDUGA Maciej Błażej
|
D7 |
MIKMEKOVÁ Eliška |
ISI AS CR, v.v.i., Brno, Czech Republic, EU |
Observation of Residual Stress in Thin Films by SLEEM
|
Co-authors: MÜLLEROVÁ Ilona, SOBOTA Jaroslav, PATÁK Aleš, CAHA Ondřej
|
D8 |
WĘGRZYNKIEWICZ Sylwia |
BELOS PLP S.A., Bielsko- Biała , Poland, EU |
Influence of the Zinc - Coatings Topography on the Adhesion Level
|
Co-authors: HAJDUGA Maciej, JĘDRZEJCZYK Dariusz & SOŁEK Dariusz
|
D9 |
CHOCHOLATÝ Ondřej |
University of West Bohemia, Plzeň, Czech Republic, EU |
Comparison of Wear Resistance of Chromium Coatings for Piston Rings using Pin-on-disc Test and Engine Test
|
Co-authors: HÁJEK Jiří & KŘÍŽ Antonín
|
D10 |
KOVÁŘÍK Ondřej |
CTU in Prague, Praha, Czech Republic, EU |
The Effect of Intersplat Porosity on Properties of W Deposits
|
Co-authors: SIEGL Jan
|
D11 |
NOVÁK Pavel |
ICT in Prague, Praha, Czech Republic, EU |
Surface Treatment of Fe-Al Alloy
|
Co-authors: FILIP Vladimír & MICHALCOVÁ Alena
|
D12 |
ZÁBRANSKÝ Tomáš |
Research and Testing Institute Plzen, Plzeň, Czech Republic, EU |
Velocity Increase of Deposited Particles in Flame Spray Technology and Velocity Profile Optimization of Flame
|
D13 |
BOHOVIČOVÁ Jana |
Slovak University of Technology, Bratislava, Slovakia, EU |
Coating OF Tool Steels with CrN Enriched with Silver
|
Co-authors: KRUM Stanislav, HUDÁKOVÁ Mária & JURČI Peter
|
D14 |
DOBRA Ramona Monica |
Politehnica University of Timisoara, Timisoara, Romania, EU |
Corrosion Performance of Duplex Treatments Based on Gas Nitriding and Shot Peening
|
Co-authors: MITELEA Ion & BOBINA Marian
|
D15 |
ALTUNCU Ekrem |
Kocaeli University, Kocaeli, Turkey |
Adhesion Properties of The Plasma Spray Coatings
|
Co-authors: USTEL Fatih
|
D16 |
HUDÁKOVÁ Mária |
STU, FMST in Trnava, Trnava, Slovakia, EU |
Diffusion Boronizing of Cr-V Ledeburitic Steels
|
Co-authors: JURČI Peter & SEDLICKÁ Viktória
|
D17 |
HOUDKOVÁ Šárka |
Research and Testing Institute Plzen, Plzeň, Czech Republic, EU |
The Spraying Parameters Optimization of the HVOF Stellite 6 Coating
|
Co-authors: KAŠPAROVÁ Michaela & SCHUBERT Jan
|
D18 |
BYSTRIANSKÝ Jaroslav |
ICT Prague, Praha 6, Czech Republic, EU |
Hydrogen Impact of High-Strength Steels Embrittlement
|
Co-authors: ŠEFL Václav, RAPOUCH Jiří, HORSÁK Lukáš, PŘÍKASKÝ Martin
|
D19 |
ŘIČÁNKOVÁ Veronika |
Brno University of Technology, Brno, Czech Republic, EU |
Microstructural Changes of Air Plasma Sprayed CoNiCrAlY Coatings After Remelting
|
Co-authors: ČELKO Ladislav, KLAKURKOVÁ Lenka & ŠVEJCAR Jiří
|
D20 |
KAŠPAROVÁ Michaela |
Research and Testing Institute Plzen, Plzeň, Czech Republic, EU |
Thermally Sprayed Coatings for High-Temperature Application
|
Co-authors: HOUDKOVÁ Š. & SCHUBERT J.
|
D21 |
PODJUKLOVÁ Jitka |
VSB - Technical University, Ostrava, Czech Republic, EU |
Properties of Glass-ceramic Enamel Coats and Their Used in Biological Environment
|
Co-authors: BÁRTEK Vratislav, LANÍK Tomáš, HRABOVSKÁ Kamila, KOPAŇÁKOVÁ Sylvie, ŠRUBAŘ Petr & SUCHÁNKOVÁ Kateřina
|
D22 |
ŠVANTNER Michal |
University of West Bohemia, Plzeň, Czech Republic, EU |
Possibilities of Stainless Steel Laser Marking
|
Co-authors: KUČERA Martin & HOUDKOVÁ Šárka
|
D23 |
SKOUMALOVÁ Zuzana |
Nuclear Research Instute Rez, Řež, Czech Republic, EU |
Corrosion Resistance and Compatibility of Eurofer Steel Coatings in the Pb-Li at the Temperature of 550°C
|
Co-authors: ŠPLÍCHAL Karel, KOŠEK Lukáš & BURDA Jaroslav
|
D24 |
FRANC Aleš |
University of West Bohemia, Plzeň, Czech Republic, EU |
The Influence of Thermal Load on Properties of Heterogeneous Joints between Steel and Aluminium Alloy
|
Co-authors: TESAŘ Jiří
|
D25 |
HORÁČEK Miroslav |
ISI AS CR, v.v.i., Brno, Czech Republic, EU |
Thin Metallic Layers Structured by E-beam Lithography
|
Co-authors: KOLAŘÍK Vladimír, URBÁNEK Michal, MATĚJKA František & MATĚJKA Milan
|
D26 |
ČELKO Ladislav |
Brno University of Technology, Brno, Czech Republic, EU |
Structural Stability of Thermal Barrier Cotings Produced by Thermal Spraying
|
Co-authors: KLAKURKOVÁ Lenka, SLÁMEČKA Karel, POSPÍŠILOVÁ Simona, JULIŠ Martin, NĚMEC Karel, PODRÁBSKÝ Tomáš & ŠVEJCAR Jiří
|
D27 |
HORNÍK Jakub |
CTU in Prague, Praha, Czech Republic, EU |
Evaluation of Properties of CrN PVD Coating for Functionally Graded Coatings
|
Co-authors: RYBNÍČEK Jan, RUND Martin, HÁJKOVÁ Pavlína & ANISIMOV Evgeniy
|
D28 |
OBRTLÍK Karel |
IPM AV ČR, v.v.i., Brno, Czech Republic, EU |
Effect of Plasma Spreyed AlSi Coating on Low Cycle Fatigue Properties of Cast Superalloy Inconel 738LC
|
Co-authors: POSPÍŠILOVÁ Simona, JULIŠ Martin, ČELKO Ladislav& PODRÁBSKÝ Tomáš
|
D29 |
BROŽEK Vlastimil |
ICT in Prague, Praha, Czech Republic, EU |
Improving Bond Strenght between Carbon Steel and Plasma Sprayed Ceramics by Phosphating Process
|
Co-authors: POKORNÝ Petr & MASTNÝ Libor
|
D30 |
KRAUS Martin |
VSB - Technical University, Ostrava, Czech Republic, EU |
The Influence of Structure Changes on Some Qualities of High-Alloyed Materials in the Simulation of Long-Term Operating Conditions
|
Co-authors: BÍLEK Pavel & BYSTRIANSKÝ Jaroslav
|
D31 |
KOLAŘÍK Vladimír |
ISI AS CR, v.v.i., Brno, Czech Republic, EU |
Thin Metallic Layers Structured by E-beam Lithography
|
Co-authors: HORÁČEK Miroslav, URBÁNEK Michal, MATĚJKA František & MATĚJKA Milan
|
E1 |
WRÓBEL Tomasz |
Politechnika Śląska, Gliwice, Poland, EU |
The Influence of Inoculation Type on Structure of Pure Aluminum
|
E2 |
FALTUS Jiří |
VUK Panenske Brezany, a.s., Praha, Czech Republic, EU |
Influence of Corrosion on Fatigue Properties of Aluminium Alloys AA6082, AA6262 a AA6023
|
Co-authors: VRÁTNÁ Jitka
|
E3 |
CIESLAR Miroslav |
Charles University in Prague, Praha, Czech Republic, EU |
In-situ Electron Microscopy Observations of the Microstructure Changes in the 6082 Aluminium Alloy during Homogenization
|
Co-authors: BAJER Jan, HÁJEK Michal & OČENÁŠEK Vladivoj
|
E4 |
KONDRACKI Marcin |
Silesian University of Technology, Gliwice, Poland, EU |
Studies of Transition Zone Phenomena for AlSi Matrix Composite Reinforced with Intermetallic Phases
|
Co-authors: CHOLEWA Mirosław
|
E5 |
VLACH Martin |
Charles Univerisity in Prague, Praha, Czech Republic, EU |
Response of Cold-Rolled Al-Mn-Sc-Zr Alloy to Isothermal and Isochronal Annealing
|
Co-authors: STULÍKOVÁ Ivana, SMOLA Bohumil, CÍSAŘOVÁ Hana, PLÁŠEK Jaromír, OČENÁŠEK Vladivoj, TANPRAYOON Dhritti & NEUBERT Volkmar
|
E6 |
POKOVÁ Michaela |
Charles University in Prague, Praha, Czech Republic, EU |
The influence of pre-deformation on minor phases precipitation in modified EN AW-3003 aluminium alloys
|
Co-authors: CIESLAR Miroslav, LACAZE Jacques
|
E7 |
ERARSLAN Yaman |
Yildiz Technical University, Istanbul, Turkey |
Effect of Deformation Strain and Hardenability of Homogenization Process on Al-6063 Alloy
|
Co-authors: AKCA Cem
|
E8 |
MÁLEK Přemysl |
Charles University in Prague, Praha, Czech Republic, EU |
High-Temperature Deformation of an ECAP Al-Mn-Based Alloy
|
Co-authors: CIESLAR Miroslav & SLÁMA Peter
|
E9 |
KRÁL Petr |
IPM AS CR, v.v.i., Brno, Czech Republic, EU |
Influence of Microstructure Instability on Creep Behaviour of UFG Pure Materials
|
Co-authors: DVOŘÁK Jiří, SVOBODA Milan & SKLENIČKA Václav
|
E10 |
DVOŘÁK Jiří |
IPM AS CR, v.v.i., Brno, Czech Republic, EU |
Microstructure Stability and Creep Behaviour of Alloys Processed by ECAP
|
Co-authors: KRÁL Petr, SVOBODA Milan, KVAPILOVÁ Marie & SKLENIČKA Václav
|
E11 |
VOJTĚCH Dalibor |
ICT in Prague, Praha, Czech Republic, EU |
Properties of the Casting AJ62 Mg-Based Alloy
|
Co-authors: KUBÁSEK Jiří & MARTÍNEK Michal
|
E12 |
KUBÁSEK Jiří |
ICT in Prague, Praha, Czech Republic, EU |
Properties of Binary and Ternary Magnesium Alloys Containing Gd, Nd, Zn or Y
|
Co-authors: VOJTĚCH Dalibor
|
E13 |
PARK Jaesin |
Research Institute of Industrial Science and Technology, Pohang, Korea, Republic of |
Workability of Wide Strip Cast AZ31 Magnesium Alloy
|
Co-authors: YUN Kiho, KIM Deok, KIM Jae Joong, PARK Woo-jin, CHOO Dongkyun, DUCK Oh & KWONn
|
E14 |
LICHÝ Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
Study of Mechanical Properties of Magnesium Alloy with the Addition of Strontium at Elevated Temperatures
|
Co-authors: CAGALA Michal, BEŇO Jaroslav & ŽÁČEK David
|
E15 |
HRADILOVÁ Monika |
ICT In Prague., Praha, Czech Republic, EU |
The Microstructure Development of Ca-Doped Mg–Zn Alloy During Hot Deformation
|
Co-authors: LEJČEK Pavel, DESRAYAUD Christopher, MONTHEILLET Frank & FRACZKIEWICZ Anna
|
E16 |
OSTAPOVETS Andriy |
IoP AS CR, v. v. i., Praha, Czech Republic, EU |
Analysis of Near-Coincidence Site Lattice Boundary Frequency in Mg-3Al-1Zn Magnesium alloy
|
Co-authors: MOLNÁR Peter, JÄGER Aleš & LEJČEK Pavel
|
E17 |
KNOTEK Vítězslav |
ICT in Prague, Praha, Czech Republic, EU |
Influence of Ni and RE on Hydrogen Absorption by Mg-Based Alloys
|
Co-authors: VOJTĚCH Dalibor
|
E18 |
BEDNÁŘOVÁ Vlasta |
VSB - Technical University, Ostrava, Czech Republic, EU |
Characterisation of Cellular Metallic Materials Manufactured by Casting Methods
|
Co-authors: LICHÝ Petr & HANUŠ Aleš
|
E19 |
MACHUTA Jiří |
Technical university of Liberec, Liberec, Czech Republic, EU |
The Determination of Coefficient Thermal Shrinkage Zinc Alloys
|
Co-authors: NOVÁ Iva
|
E20 |
ROUČKA Jaromír |
Brno Technical University , Brno, Czech Republic, EU |
Control of Solidification Process and Microstructure of Inconel Alloys and their Prediction by Means of Numerical Simulation
|
Co-authors: ODLOŽIL Jan, KOVÁČ Marek, KRUTIŠ Vladimír & HRBÁČEK Karel
|
E21 |
PETRENEC Martin |
IPM AS CR, v. v. i., Brno, Czech Republic, EU |
Microstructure characterization and fatigue behavior of beta phase containing gamma TiAl alloy
|
Co-authors: BERAN Přemysl, ŠMÍD Miroslav, CHLUPOVA Alice, KUBĚNOVA Monika
|
E22 |
FRKÁŇOVÁ Katarína |
IMMM SAS, Trnava, Slovakia, EU |
Relationship Between Microstructure and Cooling Rate in Air-Hardenable TiAl-Based Alloy
|
Co-authors: LAPIN Juraj
|
E23 |
FOGAGNOLO João Batista |
State University of Campinas, Campinas, Brazil |
The Effect of the Laser Process Parameters in the Microstructure and Mechanical Properties of Ti6Al4V Produced by Selective Laser Sintering/Melting
|
Co-authors: SALLICA-LEVA Edwin, LOPES Eder, JARDINI André & CARAM Rubens
|
E24 |
AKSENOV Sergey |
Moscow State Institute of Electronics and Mathematics, Moskva, Russian Federation |
Experimental Investigation of Ti-Al-V Alloy Superplastic Behavior
|
Co-authors: CHUMACHENKO Evgeniy & LOGASHINA Irina
|
E25 |
STANEKOVÁ Hana |
IMMM SAS, Bratislava, Slovakia, EU |
Creep Damage Assessment in Intermetallic Ti-46Al-8Ta Alloy using High- Resolution Computed Tomography
|
Co-authors: LAPIN Juraj
|
E26 |
MÁLEK Jaroslav |
UJP PRAHA a.s., Praha, Czech Republic, EU |
Beta Titanium Ti35Nb6Ta Alloy with Boron Adition
|
Co-authors: HNILICA František & VESELÝ Jaroslav
|
E27 |
LAPIN Juraj |
IMMM SAS, Bratislava, Slovakia, EU |
Microstructure Degradation of Nickel Based Single Crystal Superalloy during Creep
|
Co-authors: GEBURA Marek
|
E28 |
ZRNÍK Jozef |
COMTES FHT a.s. , Dobřany, Czech Republic, EU |
Investigation of Gamma Prime Precipitate Morphology Development in Creep Exposed Nickel Base Superalloy
|
Co-authors: STRUNZ Pavel, MALDINY Mauricio, DAVYDOV Vladimir, KRAUS Libor
|
E29 |
DUMONT Alice |
Centre des Matériaux, Evry, France, EU |
Investigation of Heat Treatment Parameters Effect on the Microstructure and on the Mechanical Properties of a Powder Metallurgy Nickel-Base Superalloy
|
Co-authors: NAZÉ Loïc, KÖSTER Alain, RÉMY Luc, GUÉDOU Jean-Yves & FRANCHET Jean-Michel
|
E30 |
MALCHARCZIKOVÁ Jitka |
VSB - Technical University, Ostrava, Czech Republic, EU |
Evaluation of Structure Characteristics of Centrifugally Cast Alloy Based on Ni3Al
|
Co-authors: KAŇÁK David, MILATA Petr, KURSA Miroslav & POHLUDKA Martin
|
E31 |
SIEGL Jan |
CTU in Prague, Praha 1, Czech Republic, EU |
Comparison of Mechanical Properties and Fracture Behaviour of Co-base and Ni-base Alloys
|
Co-authors: PODHORNÁ Božena, KUCHAŘOVÁ Květa & HRBÁČEK Karel
|
E32 |
NOVÁK Pavel |
ICT in Prague, Praha, Czech Republic, EU |
Formation of Intermetalllics during Reactive Sintering Production of Fe-Al Alloys
|
Co-authors: MICHALCOVÁ Alena, MAREK Ivo, BEDNARČÍK Jozef & SAKSL Karel
|
E33 |
ŠUMŠAL Václav |
VSB - Technical University, Ostrava, Czech Republic, EU |
Effect of Chemical Composition on the Hot Deformation Behavior of Selected Iron Aluminides
|
Co-authors: SCHINDLER Ivo, KOPEČEK Jaromír & ŠÍMA Vladimír
|
E34 |
KEJZLAR Pavel |
Technical University of Liberec, Liberec, Czech Republic, EU |
The Structure and High-Temperature Mechanical Properties of Fe-Al-Zr-Based Intermetallic Alloys
|
Co-authors: KRATOCHVÍL Petr & VODIČKOVÁ Věra
|
E35 |
MICHALCOVÁ Alena |
ICT Prague, Praha, Czech Republic, EU |
Description of Reaction Mechanism during Reactive Sintering Process of Al-Fe-Si-Ni Alloys
|
Co-authors: NOVÁK Pavel, SAKSL Karel, VOJTĚCH Dalibor, MAREK Ivo, BEDNARČÍK Josef & ZIKMUND Petr
|
E36 |
FOJT Jaroslav |
ICT Prague, Praha, Czech Republic, EU |
Corrosion Behaviour of Ti-39Nb Alloy Prepared by Powder Metallurgy
|
Co-authors: JOSKA Luděk & HNILICA František
|
E37 |
ČAPEK Jaroslav |
ICT in Prague, Praha, Czech Republic, EU |
Preparation of the NiTi Alloy by a Powder Metallurgy Technique
|
Co-authors: VOJTĚCH Dalibor & NOVÁK Pavel
|
E38 |
SZURMAN Ivo |
VSB - Technical University, Ostrava, Czech Republic, EU |
Thermomechanical Treatment of Ni-Ti-X Alloys
|
Co-authors: KURSA Miroslav
|
E39 |
LUKYANOV Alexander |
Ufa State Aviation Technical University, Ufa, Russian Federation |
Mechanical Properties and Fracture of Nanostructured TiNi Alloys during Tensile Tests at Various Temperatures
|
Co-authors: PROKOFIEV Egor & GUNDEROV Dmitry
|
E40 |
JOSKA Luděk |
ICT in Prague, Praha 6, Czech Republic, EU |
Corrosion Behaviour of DLC-Ti Alloyed Coating for Implants
|
Co-authors: FOJT Jaroslav & CVRČEK Ladislav
|
E41 |
AKCA Cem |
Yildiz Technical University, Istanbul, Turkey |
Feasibility Study to Develop Magnesium-Based Materials to Produce Biomedical Implants and Appliances for Turkey
|
Co-authors: ERARSLAN Yaman
|
E42 |
KUBÁSEK Jiří |
ICT in Prague, Praha, Czech Republic, EU |
Zn-based Alloys as an Alternative Biodegradable Materials
|
Co-authors: VOJTĚCH Dalibor
|
E43 |
SLÁMA Peter |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
Influence of Heat Treatment on the Microstructure, Mechanical Properties and Thermal Conductivity of alloy CuNi3Si
|
Co-authors: MOTYČKA Petr
|
E44 |
PODANÝ Pavel |
COMTES FHT Inc., Dobřany, Czech Republic, EU |
Dealing with Technological Problems during the Production of Thin Foils from Special Alloys
|
Co-authors: KOUKOLÍKOVÁ Martina, ZEMKO Michal & TUČEK Jaroslav
|
E45 |
MELCIOIU Georgiana |
Politehnica University of Timisoara, Timisoara, Romania, EU |
Determining Properties of Alloys of Ni-Sn-Cu-P in the Form of Ribbons Used for Soldering Electronic Components
|
Co-authors: SERBAN Viorel Aurel, CODREAN Cosmin, LOCOVEI Cosmin & CORNEA Florin Marian
|
E46 |
LASEK Stanislav |
VSB - Technical University, Ostrava, Czech Republic, EU |
Corrosion Resistance of NdFeB Magnet Type with Projective ZnAl Layer in Selected Environments
|
Co-authors: SKOTNICOVÁ Kateřina & KURSA Miroslav
|
E47 |
KOLCHUGINA Natalia |
A. A. Baikov Institute of Metallurgy and Materials Science RAS, Moscow, Russian Federation |
Role of Terbium Hydride Additions in the Formation of Microstructure and Magnetic Properties of Sintered Nd-Pr-Dy-Fe-B System Magnets
|
Co-authors: LUKIN Aleksandr A., SKOTNICOVÁ Kateřina, BURKHANOV Gennady S., KLYUEVA Natalia E. & DRULIS Henrik
|
E48 |
MENUSHENKOV Vladimir |
MISiS, Moscow, Russian Federation |
Effect of Dy Addition and Heat Treatment Conditions on the Magnetic Properties of (Nd,Dy)-Fe-B-Based Sintered Magnets
|
Co-authors: SAVCHENKO Aleksander, KURSA Miroslav & DRÁPALA Jaromir
|
E49 |
SIDOROV Evgeny |
Vladimir State University, Vladimir, Russian Federation |
Macro- and Microstructure Formation in the Liquid-Solid Region of Solid Solution Alloys, with Eutectic, Peritectic and Monotectic Transformations at Equilibrium and Non-Equilibrium Crystallization
|
Co-authors: PIKUNOV M.V. & DRÁPALA J.
|
E50 |
DRÁPALA Jaromír |
VSB - Technical University, Ostrava, Czech Republic, EU |
Our Activities in the Regional Materials Science and Technology Centre
|
Co-authors: KURSA Miroslav, GREGER Miroslav, SZURMAN Ivo, BROŽOVÁ Silvie, MALCHARCZIKOVÁ Jitka, PETLÁK Daniel, NÉTEK Václav, NOGA Zdeněk, MADAJ Michal & POHLUDKA Martin
|
F1 |
MALINDŽÁK Dušan |
Technical University in Kosice, Košice, Slovakia, EU |
New Approach to Push Furnaces Heating Optimization
|
Co-authors: STRAKA Martin & KOŠTIAL Imrich
|
F2 |
WEISS Elżbieta |
University of Finance and Management, Warsaw, Poland, EU |
Development and Strategic Decisions of Metallurgical Enterprises
|
F3 |
SPÁČIL Vojtěch |
VSB - Technical University, Ostrava, Czech Republic, EU |
Potential Customer Typology for Entrance on Powdery Painting Market
|
F4 |
BRZÓSKA Jan |
Silesian University of Technology, Gliwice, Poland, EU |
Dynamics of the Servicing and Trading Business Model Related to Metallurgical Products Versus the Growth of its Effectiveness and Value
|
F5 |
FELIKS Jerzy |
AGH University of Science and Technology, Krakow, Poland, EU |
Dependability Based Concept of Supply Chain Resilience with the Example of Supply of Iron Ore for the Steel Industry
|
Co-authors: BUKOWSKI Lech
|
F6 |
BRANSKÁ Lenka |
University of Pardubice, Pardubice, Czech Republic, EU |
Modification of Packaging Management in a Company as a Result of Involvement in a Value Network
|
Co-authors: PECINOVÁ Zuzana
|
F7 |
MICHLOWICZ Edward |
AGH University of Science and Technology, Krakow, Poland, EU |
Capital Stream Flow Modeling in a Steel Mill Waste Management System
|
Co-authors: ZWOLINSKA Bozena
|
F8 |
KORECKÝ Michal |
VSB - Technical University, Ostrava, Czech Republic, EU |
Planning and Management of Investment and Technical Development Projects under Uncertainty
|
Co-authors: TRKOVSKÝ Václav & ROŽNOVSKÝ Lukáš
|
F9 |
LOŠŤÁKOVÁ Hana |
University of Pardubice, Pardubice, Czech Republic, EU |
Perception of Attractiveness of Components of the Offer and Forms of Support to Repeat Purchases by E-shop Clients
|
Co-authors: ČURDOVÁ Markéta
|
F10 |
NOSKIEVIČOVÁ Darja |
VSB - Technical University, Ostrava, Czech Republic, EU |
Analysis of Nonrandom Patterns in Control Charts and its Software Support
|
F11 |
TOŠENOVSKÝ Josef |
VSB - Technical University, Ostrava, Czech Republic, EU |
Application of Multivariate Loss Function for the Assessment of Quality of Technological Process Management
|
Co-authors: MONSPORTOVÁ Lenka & TOŠENOVSKÝ Filip
|
F12 |
KRAMARZ Marzena |
Politechnika Śląska, Zabrze, Poland, EU |
Decoupling Point in Supply Network of Steel Products - Dynamics of Changes
|
Co-authors: KRAMARZ Włodzimierz
|
F13 |
VLČKOVÁ Vladimíra |
University of Pardubice, Pardubice, Czech Republic, EU |
Outsourcing and its Impact on Demand Planning
|
Co-authors: PATÁK Michal
|
F14 |
KLAPALOVÁ Alena |
Masaryk university, Brno, Czech Republic, EU |
Strategic Management Factors of MNCs Subsidiaries - Comparative Analysis of Metal Manufacturing and Other Industries in the Czech Republic
|
F15 |
DAVID Jiří |
VSB - Technical University, Ostrava-Poruba, Czech Republic, EU |
Control of Dependability of Metallurgical Processes Such as Logistics Chains
|
Co-authors: JANČÍKOVÁ Zora, VROŽINA Milan & NOVÁKOVÁ Helena
|
F16 |
BURCHART-KOROL Dorota |
Central Mining Institute, Katowice, Poland, EU |
Fossil Fuels Consumption Evaluation in Blast Furnace Technology Based on Different Life Cycle Impact Assessment Methods
|
F17 |
VÁVRA Jan |
University of Pardubice, Pardubice, Czech Republic, EU |
Determination of Environmental Aspects in Metallurgical Industry
|
Co-authors: BEDNAŘÍKOVÁ Marie & MIKOLAJKOVÁ Markéta
|
F18 |
KONSTANCIAK Manuela |
Czestochowa University of Technology, Czestochowa, Poland, EU |
The Use of 3x3 Matrix to Evaluation of Ribbed Wire Manufacturing Technology
|
Co-authors: BORKOWSKI Stanisław, ULEWICZ Robert, SELEJDAK Jacek & KLIMECKA-TATAR Dorota
|
F19 |
PUSTĚJOVSKÁ Pavlína |
VSB - Technical University, Ostrava, Czech Republic, EU |
Technical-economic prospects of utilization of alternative ironmaking techniques in metallurgy
|
Co-authors: JURSOVÁ Simona & BROŽOVÁ Silvie
|
F20 |
FRISCHER Robert |
VSB - Technical University, Ostrava, Czech Republic, EU |
Application of Wireless Identification Technology for Support Control in Steel Works
|
Co-authors: DAVID Jiří, STRAŇAVOVÁ Mária
|
F21 |
ŠPIČKA Ivo |
VSB - Technical University, Ostrava, Czech Republic, EU |
Background of Reduction of Operating Costs of Continuous Reheating Furnaces
|
Co-authors: HEGER Milan, ZIMNÝ Ondřej & STRAŇAVOVÁ Maria
|
F22 |
ŠVEC Pavel |
VSB - Technical University, Ostrava, Czech Republic, EU |
Diagnostics of Surface Defects such as Support Control in Steel Works
|
Co-authors: DAVID Jiří & FRISCHER Robert
|
F23 |
STRAŇAVOVÁ Maria |
VSB - Technical University, Ostrava, Czech Republic, EU |
Increasing the Profitability of the Operation of Heating Furnaces Using Models and Data Mining Systems
|
Co-authors: HEGER Milan , ŠPIČKA Ivo, ZIMNÝ Ondřej & FRANZ Jiří
|
F24 |
KLAPUT Pavel |
VSB - Technical University, Ostrava-Poruba, Czech Republic, EU |
Influence of Used Method on the Results of Gage Repeatability and Reproducibility Study
|
Co-authors: PLURA Jiří
|
F25 |
VIDOVÁ Helena |
STU in Trnava, FMT, Trnava, Slovakia, EU |
Lean Principles Application in Business Logistics
|
Co-authors: BEDNÁR Roman & BELUSKÝ Martin
|
F26 |
ČÁMSKÁ Dagmar |
University of Economics, Praha, Czech Republic, EU |
Companies Related to the Metallurgical Production and Their Financial Health
|
Co-authors: HÁJEK Jiří, BOBEK Michal & KULA David
|
F27 |
SCHWARZ Zdeněk |
ComTax Advising Ltd., Fryčovice, Czech Republic, EU |
The Methodical Problems Associated with the Using of Accounting Information for the Financial Analysis of the Metallurgical Company
|
Co-authors: BUCHTOVÁ Jana & BERANOVÁ Petra
|
F28 |
KULA David |
University of Economics, Praha, Czech Republic, EU |
Impact of Financial Crisis on Profitability and Liquidity of Companies in Metallurgical Industry in the Czech Republic
|
Co-authors: BOBEK Michal, HÁJEK Jiří, ČÁMSKÁ Dagmar
|
F29 |
ŠLÉGR Pavel |
University of Economics, Praha, Czech Republic, EU |
Controlling Tools in the Light of Crisis and Securing of Business Financial Stability through Banking Instruments
|
Co-authors: SCHOLLEOVÁ Hana
|
F30 |
SANIUK Sebastian |
University of Zielona Góra, Zielona Góra, Poland, EU |
Prototyping of Production Networks in Regional Metallurgical Cluster
|
Co-authors: SANIUK Anna
|
F31 |
WITKOWSKI Krzysztof |
University of Zielona Gora, Zielona Góra, Poland, EU |
Reverse Logistics Processes in Supply Chains in Metallurgy
|
Co-authors: GRACZYK Magdalena & BURCHART-KOROL Dorota
|
F32 |
BAKALARCZYK Sebastian |
Technical University of Łodz, Lodz, Poland, EU |
Innovation Management in Metallurgical Enterprises
|
F33 |
POMYKALSKI Przemysław |
Technical University of Lodz, Lodz, Poland, EU |
Consequences of economic downturn on financial standing of basic metals manufacturing companies in Poland
|
PB1 |
BENACHOUR Mustapha |
University of Tlemcen, Tlemcen, Algeria |
Effect of Plastic Pre-Deformation on Pipeline Steel on Fatigue Behavior
|
Co-authors: BENACHOUR Nadjia, BENGUEDIAB Mohaed & HADJOUIi Féthi
|
PB2 |
BENLAMNOUAR Mohamed Farid |
Scientific Research Centre in Welding and Control (CSC), Cheraga, Algeria |
The Influence of Relaxation Treatments on Residual Stresses in Welded Pipe API 5L-X70
|
Co-authors: BADJI Riad, HADJI Mohamed
|
PB3 |
BORISOV Sergey |
Lipetsk State Technical University, Lipetsk, Russian Federation |
HSLA Steel Hardening in the Process of Cold Rolling
|
Co-authors: MAZUR Igor P.
|
PB4 |
ĎURČÍK Roman |
ŽP VVC Ltd., Podbrezová, Slovakia, EU |
Simulation of Tube Rolling by Push Bench Process
|
Co-authors: PARILÁK Ľudovít
|
PB5 |
FABÍK Richard |
VSB - Technical University, Ostrava, Czech Republic, EU |
Mathematical Modelling of Cooling and Prediction of Mechanical Properties of Shapes after Hot Rolling
|
Co-authors: BARON Richard, KAWULOK Petr
|
PB6 |
FABÍK Richard |
VSB - Technical University, Ostrava, Czech Republic, EU |
Mathematical Modeling of Influence Drawing Parameters on Strain Uniformity across Wire Cross Section
|
Co-authors: HALFAROVÁ Petra & KUČERA Tomáš
|
PB7 |
GREGER Miroslav |
VSB - Technical University, Ostrava, Czech Republic, EU |
Structure and Properties of Dental Implants
|
Co-authors: WIDOMSKÁ Milena
|
PB8 |
GREGER Miroslav |
VSB - Technical University, Ostrava, Czech Republic, EU |
Mechanical Properties Forged Pieces from Magnesium Alloys and its Utilization in Industry
|
Co-authors: SNÁŠEL Václav & MAŠEK Václav
|
PB9 |
JAGER Aleš |
IoP AS CR, v. v. i., Praha, Czech Republic, EU |
Equal Channel Angular Pressing of Magnesium at Room Temperature: The Effect of Processing Route on Microstructure and Texture
|
Co-authors: GARTNEROVÁ Viera & LEJČEK Pavel
|
PB10 |
KLIBER Jiří |
VSB - Technical University, Ostrava, Czech Republic, EU |
Metallographic Exploration of TWIP Steel
|
Co-authors: KURSA Miroslav, DROZD Kamil, HAJDUCHOVÁ Ľuba & PEŠLOVÁ Františka
|
PB11 |
NABIL Bensaid |
National Center for Welding and Control Research, Algiers , Algeria |
Influence of Welding Parameters on the Evolution of the Microstructure of Ferritic Stainless Steel Welds (AISI 430)
|
Co-authors: TALA-IGHIL N., BADJI R., HADJI M. & OUALLAM S.
|
PB12 |
LEZHNEV Sergey |
Karaganda state industrial university, Temirtau, Kazakhstan |
Mathematical Modeling o Equal-Channel Angled Drawing in Step Tool
|
Co-authors: NAIZABEKOV Abdrakhman
|
PB13 |
LOGASHINA Irina |
Moscow State Institute of Electronics and Mathematics (Technical University), Moscow, Russian Federation |
Application of computer simulation to a problem of bearing industrial waste recycling
|
Co-authors: AKSENOV Sergey & CHUMACHENKO Evgeniy
|
PB14 |
MESSAOUDI Salim |
University de Biskra, Biskra, Algeria |
Deformation Texture in Wire Drawn Copper
|
Co-authors: ZIDANI Mosbah, BUADIN Thierry, DERFOUF Chems Eddine, BOULAGROUN Abdelmalek & MATHON Marie Hélène
|
PB15 |
PANIC Bogdan |
Politechnika Śląska, Gliwice, Poland, EU |
Model Investigations of Bed Particles Distribution in Shaft Furnaces
|
PB16 |
RAAB Zdeněk |
University of West Bohemia in Plzen, Plzeň, Czech Republic, EU |
Numerical Simulation of Cross Roll Straightening Processes
|
Co-authors: HYNEK Martin
|
PB17 |
RADEV Rossen |
University of Ruse, Ruse, Bulgaria, EU |
Flow Curves of Al 7075 Alloy Processed by Equal Channel Angular Pressing
|
Co-authors: GAGOV Valentin, GOSPODINOV Danail, YANKOV Emil & STANOEVA Marieta
|
PB18 |
RUSZ Stanislav |
VSB - Technical University, Ostrava, Czech Republic, EU |
The Structure Refining of the AZ31 Alloy by Process Severe Plastic Deformation
|
Co-authors: HADASIK Eugeniusz, ČÍŽEK Lubomír, DUTKIEWICZ Jan, DONIČ Tibor, KEDROŇ Jan, TYLŠAR Stanislav & Michal Salajka
|
PC1 |
ADAMASZEK Krzysztof |
BOSMAL Automotive Research and Development Institute Ltd., Bielsko-Biala, Poland, EU |
Influence of Alloy Elements on Corrosion of Valve Steels in Environment of Combustion Gases of Self-Ignition Engine
|
Co-authors: NOWAK Jan
|
PC2 |
ANIKEEV Andrey |
South Ural State University, Chelyabinsk, Russian Federation |
Investigation of the Effect of Heat Treatment on the Formation of Tungsten Carbide in a Gradient Composite Material
|
PC3 |
ATAPEK Ş.Hakan |
Kocaeli Universitesi, Kocaeli, Turkey |
Modelling and Thermal Analysis of Solidification in a Low Alloyed Steel
|
Co-authors: ERIŞIR Ersoy & GÜMÜŞ Serap
|
PC4 |
BELKESSA Brahim |
Scientific Research Center of Welding and Control, Cheraga, Algiers, Algeria |
Mechanical and Structural Characterization of Dissimilar Welds between Duplex and Martensitic Stainless Steel
|
Co-authors: SAHRAOUI Tahar & BADJI Riad
|
PC5 |
BÍLEK David |
Technical University in Liberec, Liberec, Czech Republic, EU |
Non-Destructive Diagnostic of Decarbonization Files of Steels
|
Co-authors: SKRBEK Břetislav & PETERA Martin
|
PC6 |
BYSTRIANSKÝ Jaroslav |
ICT Prague, Praha 6, Czech Republic, EU |
Various Demonstrations of Hydrogen-Induced Damage to Steel
|
PC7 |
CAGALA Michal |
VSB - Technical University, Ostrava, Czech Republic, EU |
Plasticity of Two High Manganese Steels with Different Ni and Cu Additions
|
Co-authors: MAZANCOVÁ Eva, PŘÍKASKÝ Martin, LICHÝ Petr & BLAHOŽOVÁ Hana
|
PC8 |
DUONG Van Yen |
Institute of Weapons, Hanoi, Viet Nam |
Exploding Experiment for Evaluation of Physical-Mechanical Characteristics of Metallic Materials
|
Co-authors: NGUYEN Quang Thuan & HOANG Nguyen Khoi
|
PC9 |
GAUDE-FUGAROLAS Daniel |
Independent Research in Physical Metallurgy and Engineering, Vilassar de Mar, Spain, EU |
Interaction of Prior Deformation and Heating Rate on Austenitisation Kinetics
|
PC10 |
GOLI-OGLU Eugene |
I.P. Bardin Central Research Institute for Ferrous Metallurgy, Moscow, Russian Federation |
Features of Structure Formation of Hot-Deformed Austenite, the Final Microstructure and Properties of Low Carbon Microalloyed Steel by Thermomechanical Processing
|
Co-authors: EFRON Leonid & MOROZOV Uriy
|
PC11 |
GOSPODINOV Danail |
University of Ruse, Ruse, Bulgaria, EU |
Some Specifics and Opportunities in Vacuum oil Quenching
|
PC12 |
GROZA Cosmin |
"Politehnica" University of Timisoara, Timisoara, Romania, EU |
Melted Zone Morphology by Laser Welding of Ti-6Al-4V with X5CrNi18-10
|
Co-authors: MITELEA Ion, UTU Ion-Dragos
|
PC13 |
GURO Vitaliy |
Institute of general & inorganic chemistry AS, Tashkent, Uzbekistan |
Ammonium Perrhenate Purificiation and Rhenium Recovery from Heat-Resistant Rhenium-Nickel Superalloys
|
PC14 |
GÜMÜŞ Serap |
Kocaeli University, Kocaeli, Turkey |
Microstructural Characterization of Carbides in a Cast High Speed Steel using Different Metallographic Techniques
|
Co-authors: ATAPEK Ş. Hakan, POLAT Şeyda, ERİŞİR Ersoy, ALKAN Attila
|
PC15 |
HALFA Hossam |
Central Metallurgical R&D Ins, Cairo, Egypt |
The Role of Production Technology and Nitrogen Addition on the Microstructure and the Corrosion Behaviors of High Speed Tool Steel M41
|
Co-authors: HANNAA B. Hassan
|
PC16 |
HALFA Hossam |
Central Metallurgical R&D Ins, Cairo, Egypt |
Innovative Method for Producing functionally Gradient Steel for High Corrosion Resistance Applications
|
Co-authors: MAMDOUH Eissa
|
PC17 |
HAVLÍČEK Petr |
DT - Pointworks and Machineworks, Prostějov, Czech Republic, EU |
Experience with Explosive Hardening of Railway Frogs from Hadfield Steel
|
Co-authors: BUŠOVÁ Kateřina
|
PC18 |
CHUMANOV Ilya |
South Urals State University, Chelyabinsk, Russian Federation |
Investigation of Mechanical Properties of Metal-Ceramic Gradient Material at High Temperatures
|
PC19 |
JENÍČEK Štěpán |
University of West Bohemia in Plzen, Plzeň, Czech Republic, EU |
Determination of Material Characteristics of Dynamically Stressed High-Strength Steel
|
Co-authors: MAŠEK Bohuslav
|
PC20 |
JURASZ Zbigniew |
Bosmal Automotive Research and Development Institute Ltd., Bielsko-Biała, Poland, EU |
Corrrosion Resistance of Valv Steels in Combustion Gases of Fuel Oil with 5 and 10 % Bio-Components Additives
|
Co-authors: ADAMASZEK Krzysztof
|
PC21 |
JURCHELA Alin Dan |
“Politehnica” University of Timisoara, Timisoara, Romania, EU |
Considerations on the Effects of Carbon Content on the Cavitation Erosion Resistance of Stainless Steels with Controled Content of Chromium and Carbon
|
Co-authors: BORDEASU Ilare, MITELEA Ion & KARABENCIOV Adrian
|
PC22 |
KARABENCIOV Adrian |
"Politehnica" University of Timisoara, Timisoara, Romania, EU |
Considerations on the Cavitation Erosion Behavior of Two Stainless Steels with Similar Ratios of Structural Constituents
|
Co-authors: BORDEASU Ilare, MITELEA Ion & JURCHELA Alin Dan
|
PC23 |
KATONA Stefan-Eusebiu |
"Politehnica" University of Timisoara, Timisoara, Romania, EU |
Contribution Regarding the Behavior to Cavitation Erosion of Some Austenitic Stainless Steels
|
Co-authors: BORDEASU Ilare & MITELEA Ion
|
PC24 |
MAREK Martin |
VSB - Technical University, Ostrava, Czech Republic, EU |
Magnetic Properties of the Types Steels for Chambers of Electron Microscopes, Innovative Research of Electron Microscope
|
Co-authors: PETLAK Daniel, RICHTER Zbyněk, HOLČÁKOVÁ Regina & REŽNAR Jiří
|
PC25 |
MAZANCOVÁ Eva |
VSB - Technical University, Ostrava, Czech Republic, EU |
Analysis of Selected High Manganese Steels Parameters
|
Co-authors: SCHINDLER Ivo & CAGALA Michal
|
PC26 |
MAZANCOVÁ Eva |
VSB - Technical University, Ostrava, Czech Republic, EU |
Influence of Ageing Processes on Strengthening of Three TRIPLEX Steel Types
|
Co-authors: RUŽIAK Ivan, JONŠTA Petr & VYLEŽÍK Michal
|
PC27 |
MAZANCOVÁ Eva |
VŠB - Technical University, Ostrava, Czech Republic, EU |
Selected Properties of Mines Supports
|
Co-authors: HOLEŠINSKÝ Jan & VAŠEK Zdeněk
|
PC28 |
MIKMEKOVÁ Šárka |
ISI AS CR, v.v.i., Brno, Czech Republic, EU |
Study of metals and alloys by SLEEM
|
Co-authors: MÜLLEROVÁ Ilona, MIKMEKOVÁ Eliška & FRANK Luděk
|
PC29 |
MÍŠKOVÁ Jana |
COMTES FHT a.s., Dobřany, Czech Republic, EU |
Structural Analysis of X2CrNiMoN22-5-3 Duplex Steel Ingot
|
Co-authors: MARTÍNEK Petr & DLOUHÝ Jaromír
|
PC30 |
OPIELA Marek |
POLITECHNIKA ŚLĄSKA, Gliwice, Poland, EU |
Influence of Plastic Deformation Conditions on Recrystallization Kinetics of Nb-Ti-V Microalloyed Steel
|
Co-authors: GRAJCAR Adam
|
PC31 |
PERIANU Ion Aurel |
Politehnica "University"of Timisoara, Timisoara, Romania, EU |
Optimizing Abrasive Waterjet Cutting for Special Materials. Case Study: Cutting Austenitic Stainless Steels
|
Co-authors: BIRDEANU Valentin, MITELEA Ion
|
PC32 |
POKORNÝ Petr |
ICT in Prague, Praha, Czech Republic, EU |
An Objective Assessment of Change in Porosity of the Concrete Stone from the Phase Interface Hot-Dip Galvanized Steel/Concrete and Carbon Steel/Concrete
|
Co-authors: SEDLÁŘOVÁ Ivona & MICHALCOVÁ Alena
|
PC33 |
POLÁCHOVÁ Daniela |
UJP PRAHA a.s., Praha, Czech Republic, EU |
Comparison of Hardness, Tensile Stress and Yield Stress, Depending on Temperature and Annealing Time of Degradation of P91 Steel
|
Co-authors: HORVÁTH Ladislav, HÁJKOVÁ Pavlína & UZEL Josef
|
PC34 |
POPESCU Mihaela |
Politehnica University of Timisoara, Timisoara, Romania, EU |
Problems Posed by the Design and Implementation of a Welded Petrochemical Storage Tank
|
Co-authors: ROŞU Radu Alexandru, CUTEAN Simona & BOBINĂ Marian
|
PC35 |
SAFANAMA Dorsa Sadat |
Amirkabir University of Technology, Tehran, Iran, Islamic Republic of |
Effect of Welding Current on Mechanical Properties of Martensitic Advanced High Strength Steel Spot Welds
|
Co-authors: MARASHI Pirooz, POURANVARI Majid, KHANI Milad & SHOJAIE Sina
|
PC36 |
STŘÍLKOVÁ Lucie |
MATERIALS AND METALLURGICAL RESEARCH Ltd., Ostrava, Czech Republic, EU |
Microstructural Investigation of ICDP Iron Designed for Working Layers of Composite Centrifugally Casted Rolls on Hot Rolling Mills
|
Co-authors: VÁLEK Tomáš
|
PC37 |
STUDNICKI Andrzej |
Politechnika Śląska, Gliwice, Poland, EU |
Stereological Parameters of Carbides in Modified Wear Resistant Fe-C-Cr Alloys
|
Co-authors: JEZIERSKI Jan
|
PC38 |
TRAN Quang Dung |
University of Defence, Moravská Třebová, Czech Republic, EU |
Properties of Hardened Layer of Drilled Deep Hole
|
Co-authors: SVOBODA Emil, JOSKA Zdeněk, POKORNÝ Zdeněk & MAŇAS Karel
|
PC39 |
TURŇA Milan |
SUT in Trnava, FMST, Trnava, Slovakia, EU |
Effect of Variable Pressure Field on Equilibrium State of Molten Metal with Bottom Heating and Situated in a Homogeneous Gravitation Field
|
Co-authors: TURŇA Ľubomír & TURŇOVÁ Zuzana
|
PC40 |
VÁLEK Tomáš |
Vítkovické slévárny s.r.o., Ostrava, Czech Republic, EU |
The Control of Microstructure of ICDP Iron Using Thermal Analysis
|
Co-authors: HAMPL Jiří
|
PC41 |
VLASÁK Tomáš |
SVUM a.s., Praha, Czech Republic, EU |
High Temperature Properties of a New Wrought Austenitic Steel
|
Co-authors: HAKL J. & NOVÁK P.
|
PC42 |
VOLÁK Josef |
Research and Testing Institute Plzen, Plzeň, Czech Republic, EU |
Determination of Fatigue Characteristics of Steel P92
|
Co-authors: CHOCHOLOUŠEK Michal, Matyáš NOVÁK
|
PC43 |
VOLESKÝ Lukáš |
Technical University of Liberec, Liberec, Czech Republic, EU |
Optimization of the Automated-Steel Heat Treatment
|
Co-authors: KEJZLAR Pavel, ANDRŠOVÁ Zuzana
|
PC44 |
YAHMI Youcef |
Welding and NDT scientific research Center, Cheraga Algiers , Algeria |
Mechanical Properties and Microstructure of the CrMo Steel Steam Pipeline Welds after Long-Term Service
|
Co-authors: MAAMACHE Bouzid & BELKESSA Brahim
|
PC45 |
DIMIAN Marcela Elena |
University “Politehnica” of Timişoara, Timisoara, Romania, EU |
Cavitation Erosion Behavior of Heat Treated Ti-6Al-4V Alloy
|
Co-authors: MITELEA Ion & BORDEASU Ilare
|
PD1 |
CIUBOTARIU Costel Relu |
Politehnica University of Timisoara, Timisoara, Romania, EU |
New Structural and Morphological Properties of Thermally Sprayed Stellite Coatings after Laser Remelting
|
Co-authors: MARGINEAN Gabriela
|
PD2 |
DJAMA Mustapha |
C.S.C., Algiers, Algeria |
Controlling the Integrity of Pipelines Against Corrosion Using a Monitoring Interface
|
Co-authors: BENCHERIF Mouhamed
|
PD3 |
DJEMA Mohamed Amine |
University of Boumerdes, Boumerdes, Algeria |
Effect of Vibro-Impact Strengthening on the Fatigue Strength of Metallic Surfaces
|
Co-authors: HAMOUDA Khaled, BABICHEV Anatoly, SAIDI Djamel & HALIMI Djamel
|
PD4 |
DUPÁK Libor |
ISI AS CR, v.v.i., Brno, Czech Republic, EU |
Dynamic Impact Wear Test of Hard Coatings
|
Co-authors: FOŘT Tomáš, GROSSMAN Jan, SOBOTA Jaroslav
|
PD5 |
JEDRZEJCZYK Dariusz |
University of Bielsko-Biala, Bielsko-Biala, Poland, EU |
Influence of Modifying Treatment of Titanic Implants on Periimplantitis
|
Co-authors: ZDZIECH Tadeusz & HAJDUGA Maciej
|
PD6 |
KOLAŘÍKOVÁ Marie |
CTU in Prague, Praha, Czech Republic, EU |
Wear Resistance of Duplex Coated Cr-Mo-V Alloyed Steel
|
Co-authors: SUCHÁNEK Jan
|
PD7 |
KOPAŇÁKOVÁ Sylvie |
VSB - Technical University, Ostrava, Czech Republic, EU |
Study of Influence Particle Size of Anticorrosive Pigments on Coating Adhesion to the Steel Substrate
|
Co-authors: PODJUKLOVÁ Jitka, BÁRTEK Vratislav, HRABOVSKÁ Kamila, SUCHÁNKOVÁ Kateřina, ŠRUBAŘ Petr & LANÍK Tomáš
|
PD8 |
KRIVOLAPOVA Olga N. |
National University of Science and Technology «MISiS», Moscow, Russian Federation |
Physico-Chemical Studies of Correlations of Impedance Parameters and Determination of the Characteristic Frequencies of the Test Signal of Lithium-Ion and Lithium-Polymer Batteries
|
Co-authors: TARASOV Vadim P. & DUBININA Lyubov V.
|
PD9 |
POKORNÝ Petr |
ICT in Prague, Praha, Czech Republic, EU |
Testing Bond Strenght Galvanized Steel Reinforcement Concrete with Verification Causes Changes at the Interface of both Materials
|
Co-authors: KOUŘIL Milan & NOVÁK Pavel
|
PD10 |
SAVKOVÁ Jarmila |
University of West Bohemia in Plzen, Plzeň, Czech Republic, EU |
Tribological Properties of TiAlSIN Coatings for Forming Processes
|
Co-authors: BLÁHOVÁ Olga
|
PD11 |
SAVKOVÁ Jarmila |
University of West Bohemia in Plzen, Plzeň, Czech Republic, EU |
High Temperature Sliding Behaviour of TiC-based Thermally Sprayed Coating
|
Co-authors: KAŠPAROVÁ Michaela & HOUDKOVÁ Šárka
|
PD12 |
SPLÍTEK Roman |
University of West Bohemia in Plzen, Plzeň, Czech Republic, EU |
Manufacturing Technologie for Coatings Based on FeCrAlY
|
Co-authors: HOUDKOVÁ Šárka & KAŠPAROVÁ Michaela
|
PD13 |
SUCHÁNKOVÁ Kateřina |
VSB - Technical University, Ostrava, Czech Republic, EU |
Study of Transparent Nanocoatings for Application to Materials of Metallurgical Production
|
Co-authors: PODJUKLOVÁ Jitka, LANÍK Tomáš, BÁRTEK Vratislav, KOPAŇÁKOVÁ Sylvie, ŠRUBAŘ Petr, HRABOVSKÁ Kamila & HANÁK Miroslav
|
PD14 |
SCHUBERT Jan |
Research and Testing Institute Plzen, Plzeň, Czech Republic, EU |
Effect of Co Content on the Properties of HVOF Sprayed Coatings Based on Tungsten Carbide
|
Co-authors: HOUDKOVÁ Šárka & KAŠPAROVÁ Michaela
|
PD15 |
ŠIMEČEK Jiří |
University of West Bohemia in Plzen, Plzeň, Czech Republic, EU |
Examination of the Fatigue Resistance of D2 Steel, Depending on Surface Conditions
|
Co-authors: KŘÍŽ Antonín
|
PD16 |
ŠRUBAŘ Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
Study of the Effects of Distribution Pigment Nanoparticles Corrosion Transparent Coating
|
Co-authors: PODJUKLOVÁ Jitka, LANÍK Tomáš, BÁRTEK Vratislav, SUCHÁNKOVÁ Kateřina, KOPAŇAKOVÁ Sylvie, HRABOVSKÁ Kamila & DVORSKÝ Richard
|
PD17 |
VÁŇOVÁ Petra |
VSB - Technical University, Ostrava, Czech Republic, EU |
Effect of Heat Treatment on the Formation and Pickling of Scale Layers
|
Co-authors: PĚNČÍK Roman, ČEMPEL David
|
PD18 |
VASILACHE Violeta |
Stefan cel Mare University, Suceava, Romania, EU |
Studies about Structure and Some Physical Properties of Nickel and Zinc-Nickel Alloy Layers Electrochemically Deposited
|
Co-authors: POPA Catalin & VASILACHE Traian
|
PD19 |
VONTOROVÁ Jiřina |
VSB - Technical University, Ostrava, Czech Republic, EU |
Influence of CMT and MIG Soldering on Zinc Layer Thickness
|
Co-authors: MOHYLA Petr & ŠEVČÍKOVÁ Xenie
|
PE1 |
ADIGUZEL Osman |
Firat University , Elazig, Turkey |
Nanoscale Characterization of Martensite Structures in Copper Based Shape Memory Alloys
|
PE2 |
ANISIMOV Evgeniy |
CTU in Prague, Praha, Czech Republic, EU |
The Effect of Deep Cryogenic Treatment on Wear and Corrosion Resistance of Titanium and its Alloy Ti 6Al 4V
|
Co-authors: PEŠLOVÁ Františka & FAJNOR Pavol
|
PE3 |
BELAYEV Igor |
Vladimir State University, Vladimir, Russian Federation |
Phase Composition and Service Properties of Refractory Ceramic Moulds for Single Crystal Growing
|
Co-authors: STEPNOV A.A., KUTEPOV A.V. & KOLCHUGINA N.B.
|
PE4 |
BELAYEV Igor |
A. A. Baikov Institute of Metallurgy and Materials Science RAS, Moscow, Russian Federation |
Temperature-Time Melting Conditions for a YuNDKT5BA Magnetic Alloy Prepared from a Rated Charge of a Given Composition
|
Co-authors: ZORINA Elena, GRIGOROVICH K. V. & KOLCHUGINA N. B.
|
PE5 |
MATĚJÍČEK Jiří |
IPP AS CR, Praha, Czech Republic, EU |
Tungsten-steel Composites and FGMs Produced by Hot Pressing
|
Co-authors: BOLDYRYEVA Hanna, BROŽEK Vlastimil, ČIŽMÁROVÁ Elena & PALA Zdeněk
|
PE6 |
BOUTASSOUNA Djamal |
University of Laghouat, Laghouat, Algeria |
AES Analysis of Sulfur Grain Boundary Equilibrium Segregation in Nickel with Small Bulk Content in Sulfur
|
Co-authors: Le GALL René & LEFKAIER Ibn Khaldoun
|
PE7 |
BRYKSÍ STUNOVÁ Barbora |
CTU in Prague, Praha, Czech Republic, EU |
Effect of Strontium on the Structure of Non-Binary Casting Alloy Al-Si
|
PE8 |
BŘUSKA Marek |
VSB - Technical University, Ostrava, Czech Republic, EU |
Influence of Remelting Repeated on the Mechanical Properties and Structure of Alloys RR.350
|
Co-authors: LICHÝ Petr, BEŇO Jaroslav & CAGALA Michal
|
PE9 |
CORNEA Florin-Marian |
“Politehnica” University of Timisoara, Timisoara, Romania, EU |
Influence of Chemical Composition on the Mechanical Properties of Amorphous Alloys Produced in Ribbons Form
|
Co-authors: SERBAN Viorel-Aurel, CODREAN Cosmin, BUZDUGAN Dragos & MELCIOIU Georgiana
|
PE10 |
CRISTEA Lidia |
Romanian University of Science and Arts, Bucharest, Romania, EU |
The Growth of the Quality Properties of the Alloys from the Ti-Mn (OT-4) System in the Elaboration Process
|
Co-authors: CRISTEA Enona
|
PE11 |
ČEGAN Tomáš |
VSB - Technical University, Ostrava, Czech Republic, EU |
Effect of Yttrium on Oxygen Content and Microstructure of Ti-Al Intermetallics
|
Co-authors: KURSA Miroslav, KONEČNÁ Kateřina, SMETANA Bedřich, ZLÁ Simona
|
PE12 |
ČEGAN Tomáš |
VSB - Technical University, Ostrava, Czech Republic, EU |
Effect of Annealing on Microstructure and Properties of Yttrium Alloyed Intermetallics Ti-47Al
|
Co-authors: KURSA Miroslav, KONEČNÁ Kateřina & PETLÁK Daniel
|
PE13 |
ČERMÁK Jiří |
IPM AS CR, v.v.i, Brno, Czech Republic, EU |
Hydrogen Storage Capacity of Mg/Mg2Ni Eutectic Doped with Elements from Groups XIII and XIV
|
Co-authors: KRÁL Lubomír
|
PE14 |
ČERMÁK Jiří |
IPM ASCR, v. v. i., Brno, Czech Republic, EU |
Improvement of Hydrogen Desorption Characteristics of Eutectic Mg/Mg2NiH4 and Mg2NiH4 by In Addition
|
Co-authors: KRÁL Lubomír
|
PE15 |
DRÁPALA Jaromír |
VSB - Technical University, Ostrava, Czech Republic, EU |
New Types of Lead-Free Solders and their Properties
|
Co-authors: PETLÁK Daniel, MALCHARCZIKOVÁ Jitka, VODÁREK Vlastimil, KONEČNÁ Kateřina, SMETANA Bedřich, ZLÁ Simona, KOSTIUKOVÁ Gabriela, MUSIOL Jan, SEIDLEROVÁ Jana, LASEK Stanislav, MADAJ Michal, KROUPA Aleš, URBÁNEK Jan, DUŠEK Karel, SEDLÁČEK Josef & SIDOROV Valerij E.
|
PE16 |
DROBEČEK Jan |
Technical University of Liberec, Liberec, Czech Republic, EU |
Corrosion Resistance of Heat-Resistance Alloys in Molten Lead Crystal at 1200°C
|
Co-authors: HOTAŘ Adam & HOTAŘ Vlastimil
|
PE17 |
HANUS Aleš |
VSB - Technical University, Ostrava, Czech Republic, EU |
Production and Properties of Cast Metal with a Porous Structure
|
Co-authors: LICHÝ Petr & BEDNÁŘOVÁ Vlasta
|
PE18 |
HAKEM Maamar |
C.S.C., Algiers, Algeria |
Welding and Characterization of 5083 Aluminium Alloy
|
Co-authors: LEBAILI S., MIROUD J., BENTALEB A. & TOUKALI S.
|
PE19 |
JAN Vít |
Brno University of Technology, Brno, Czech Republic, EU |
Preparation of Porous Intermetallics from Coldspray deposits
|
Co-authors: ČÍŽEK Jan, KURKOVÁ Pavlína
|
PE20 |
JUŘICA Jan |
VSB - Technical University, Ostrava-Poruba, Czech Republic, EU |
Microstructure of TiAl-Nb Alloys after Thermal Hydrogen Treatment
|
Co-authors: LOSERTOVÁ Monika
|
PE21 |
KAHOVEC Čestmír |
KOVOHUTĚ ROKYCANY, a. s., Praha, Czech Republic, EU |
Industrial Development and Research of Modern Ni-Alloys for Sophisticated Application (including Production Technology)
|
Co-authors: MACHÁČKOVÁ Kateřina, REŽNAR Jiří & FALTUS Jiří
|
PE22 |
KIRILLOVA Valentina |
A.A.Baikov Institute of Metallurgy and Materials Sciences RAS, Moscow, Russian Federation |
The Synthesis of Nb- and Zr-Carbides and -Carbonitrides by the Plasma-Arc Method
|
Co-authors: BURKHANOV G.S., SDOBYREV V.V., DEMENTEV V.A., SHVORNEVA L.I., KUZNETSOV K.B., KLIMAEV S.M. & DANKIN D.G.
|
PE23 |
KEKULE Tomáš |
Charles University in Prague, Praha, Czech Republic, EU |
Effect of Heat Treatment on Phase Transformations in Mg-Y-(Nd)-Zn Alloys
|
Co-authors: VLACH Martin, CÍSAŘOVÁ Hana, SMOLA Bohumil & STULÍKOVÁ Ivana
|
PE24 |
KLIMOVÁ Alena |
IMMM SAS, Bratislava, Slovakia, EU |
Microsegregation Behaviour of the Alloying Elements in Directionally Solidified Intermetallic Ti-44Al-5Nb-0.2B-0.2C Alloy
|
Co-authors: LAPIN Juraj
|
PE25 |
KOLAŘÍK Ladislav |
CTU in Prague, Praha, Czech Republic, EU |
Influence of Repeated Repair Welding on Weld Quality of Precipitation Hardenable Al Alloy EN AW 6082-T6
|
Co-authors: KOLAŘÍKOVÁ Marie, KOVANDA Karel, VONDROUŠ Petr & DUNOVSKÝ Jiří
|
PE26 |
KONEČNÁ Kateřina |
VSB - Technical University, Ostrava, Czech Republic, EU |
Structural Phase Analysis of Nickel Superalloy MAR- M - 247
|
Co-authors: JONŠTA Zdeněk, JONŠTA Petr, GABČOVÁ Miriam & HRBÁČEK Karel
|
PE27 |
LOSERTOVÁ Monika |
VSB - Technical University, Ostrava, Czech Republic, EU |
Properties of Mg-Ni Based Alloys Prepared by Mechanical Alloying
|
Co-authors: JUŘICA Jan, ŠTĚPÁN Petr, KONEČNÁ Kateřina & MATĚJKA Vlastimil
|
PE28 |
LUPTÁKOVÁ Natália |
University of Alexander Dubcek in Trencin, Púchov, Slovakia, EU |
Impact Raw Material for Production Zinc Oxide in Retort Furnaces
|
Co-authors: KEBÍSKOVÁ Jarmila, ANISIMOV Evgeniy, BENÁK Michal & PEŠLOVÁ Františka
|
PE29 |
MACHÁČKOVÁ Kateřina |
KOVOHUTĚ ROKYCANY, a. s., Rokycany, Czech Republic, EU |
Industrial Research and Development Technology of Prodicton of Bars Made from Ni and Cu Alloys
|
Co-authors: PODANÝ Pavel, SVĚTLÁ Miroslava & SLÁMA Peter
|
PE30 |
MARKOVA-DENEVA Ivania |
University of Chemical Technology and Metallurgy, Sofia, Bulgaria, EU |
Template synthesis of Cu and Cu-Sn nanoparticles using carbon foam as a support
|
Co-authors: PETROV Tihomir & DENEV Ivan
|
PE31 |
MHADHBI Mohsen |
National Institute of Research and Physicochemical Analysis , Tunis, Tunisia |
Influence of Heat Treatments on the Structure of FeAl Powders Mixture Obtained by Mechanical Alloying
|
Co-authors: KHITOUNI M., ESCODA L. & SUÑOL J. J.
|
PE32 |
MENUSHENKOV Vladimir |
MISiS, Moscow, Russian Federation |
Effect of High Energy Milling and Subsequent Annealing on the Phase Composition and Magnetic Properties of Nanocrystalline Nd9.5Fe84B6Cu0.5 Alloy
|
Co-authors: VIDMANOV Ilia, BORDYUZHIN Igor, SAVCHENKO Aleksander, POLIKUTKINA Svetlana, SZHUKOV Dmitrii & DINISLAMOVA Elina
|
PE33 |
MENUSHENKOV Vladimir |
MISiS, Moscow, Russian Federation |
The Effect of Heat Treatment on the Crystal Structure and Magnetic Properties of Melt Spun Fe3B-Based Alloys
|
Co-authors: SAVCEHNKO Elena, SVIRIDIVA Tatiana, SAVCHENKO Aleksander
|
PE34 |
OANCA Octavian |
"Politehnica" University of Timisoara, TIMISOARA, Romania, EU |
Horn Failure Analysis from Titan Alloy Used in Ultrasonic Cavitational Process
|
Co-authors: PASCA Niculai, BORDEASU Ilare & MITELEA Ion
|
PE35 |
POHLUDKA Martin |
VSB - Technical University, Ostrava, Czech Republic, EU |
Porosity of Ni3Al-Based Alloys Prepared by Gravity and Centrifugal Casting
|
Co-authors: ČEGAN Tomáš, MALCHARCZIKOVÁ Jitka, KAŇÁK David & FRIDRICH René
|
PE36 |
POLAT Seyda |
Kocaeli University, Kocaeli, Turkey |
A Microstructural Study on CuSn10 Bronze Produced by Sand and Investment Casting Techniques
|
Co-authors: TASLICUKUR Z., ALTUG G. S., ATAPAKE S. H. & TUREDI E.
|
PE37 |
POPELA Tomáš |
ICT in Prague, Praha, Czech Republic, EU |
Preparation and Properties of Boride Layers on TiAl Intermetallics
|
Co-authors: VOJTĚCH Dalibor
|
PE38 |
PRŮŠA Filip |
ICT in Prague, Praha, Czech Republic, EU |
Microstructure and Properties of Rapid Solidified Al-Si-Fe and Al-Si-Fe-Cr Alloys Prepared by Centrifugal Atomization
|
Co-authors: VOJTĚCH Dalibor
|
PE39 |
REVAUD Meriadeg |
MINES ParisTech, Evry, France, EU |
Microstructural Study of the Intergranular Precipitation in ATI 718Plus Superalloy
|
Co-authors: NAZÉ Loïc
|
PE40 |
SIDOROV Evgeny |
Vladimir State University, Vladimir, Russian Federation |
Manufacture of Aluminium Bronze Ingots by Continuous and Semi-Continuous Casting Methods
|
Co-authors: VIKHAREV S.O. & SAKULINA A.V.
|
PE41 |
SIDOROV Evgeny |
Vladimir State University, Vladimir, Russian Federation |
On the Configuration of the Au - Ag - Cu System Phase Diagram
|
Co-authors: SAKULINA A.V. & VIKHAREV S.O.
|
PE42 |
STEFANOVA Vladislava |
University of Chemical Technology and Metallurgy, Sofia, Bulgaria, EU |
Selective Extraction of Cobalt from Nickel Sulphate Solutions by Cyanex 272
|
Co-authors: ILIEV P., LUCHEVA B. & TZONEVSKIi A.
|
PE43 |
SKOTNICOVÁ Kateřina |
VSB - Technical University, Ostrava-Poruba, Czech Republic, EU |
Structure and Selected Corrosion Properties of Alloy Ni45Mn39Sn11Co5
|
Co-authors: LASEK Stanislav, KOCICH Radim & KURSA Miroslav
|
PE44 |
SUCHODOLSKA Anna |
Politechnika Radomska, Radom, Poland, EU |
Corporate Social Responsibility in Assessment of Consumers of Metallurgical Enterprises
|
PE45 |
ŠTĚPÁN Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
Effect of Heat Treatment on Properties of TiNb Based Alloys
|
Co-authors: LOSERTOVÁ Monika
|
PE46 |
ŠVEC Martin |
Technical University in Liberec, Liberec, Czech Republic, EU |
The effect of heat treatment on the structure of Nb and Cr doped Fe3Al alloy
|
Co-authors: VODIČKOVÁ V., HANUS P.
|
PE47 |
TOMA Cristian |
ISIM Timisoara, Timisoara, Romania, EU |
CMT Joining of Aluminum and Magnesium Alloy in a Statistical Experiment
|
Co-authors: CICALA E., SALLAMAND P. & GREVEY D.
|
PE48 |
TROFIMOV Evgeny |
South Ural State University, Chelyabinsk, Russian Federation |
The Thermodynamic Analysis of the "Nonferrous Metal Melt - Conjugate Phases" Systems
|
Co-authors: MIKHAILOV Gennady
|
PE49 |
ZOBAČ Martin |
ISI AS CR, v.v.i., Brno, Czech Republic, EU |
Small-Volume Reactive Metal Alloys Prepared by Electron Beam Melting
|
Co-authors: VLČEK Ivan, ZOBAČOVÁ Jitka & DUPÁK Libor
|
PE50 |
ŻYDEK Agata |
Czestochowa University of Technology, Czestochowa, Poland, EU |
Microstructural Analysis of AM50+3%RE Magnesium Alloy in the As-Cast Condition and after Heat Treatment
|
Co-authors: BRASZCZYŃSKA-MALIK Katarzyna
|
PF1 |
BAKALARCZYK Sebastian |
Technical University of Łodz, Lodz, Poland, EU |
Risk of Economic Activity of Metallurgical Industry Enterprises
|
Co-authors: GRADZKI Ryszard
|
PF2 |
BESTA Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
Application of Total Productive Maintenance principles in metallurgical processes
|
Co-authors: VOZŇÁKOVÁ Iveta, VILAMOVÁ Šárka, ŠVECOVÁ Eva, STOCH Milan
|
PF3 |
BESTA Petr |
VSB - Technical University, Ostrava, Czech Republic, EU |
Negative Elements in Blast Furnace Process
|
Co-authors: JANOVSKÁ Kamila, HAVERLAND Jindřich
|
PF4 |
HAVIERNIKOVÁ Katarína |
University of Alexander Dubcek in Trencin, Trenčín, Slovakia, EU |
Selected Aspects of Clusters Initiatives in the Field of Industry in the Slovak republic
|
PF5 |
JANOVSKÁ Kamila |
VSB - Technical University, Ostrava, Czech Republic, EU |
Optimization of the Tolling Project of Using the Methods of Network Analysis
|
Co-authors: STANĚK Jiří, VILAMOVÁ Šárka, VOZŇÁKOVÁ Iveta & KUTAČ Josef
|
PF6 |
KARDAS Edyta |
Czestochowa University of Technology, Czestochowa, Poland, EU |
The Effect of Quality of Ferrous Burden Materials on the Quality of Pig Iron
|
PF7 |
LAMPA Martin |
VŠB - Technical University, Ostrava, Czech Republic, EU |
Computer Support for Process Optimization in Metallurgical Company
|
Co-authors: SAMOLEJOVÁ Andrea
|
PF8 |
LENORT Radim |
VSB - Technical University, Ostrava, Czech Republic, EU |
Design and Implementation of the Forged Pieces Production Planning and Control Concept Based on Production Lines
|
Co-authors: KLEPEK Roman
|
PF9 |
LISOWSKA Renata |
Technical University of Lodz, Lodz, Poland, EU |
Impact of EU Funds on Building the Innovation Potential of Poland’s Small and Medium Enterprises from the Metal and Machine-Building Industries
|
Co-authors: STANISŁAWSKI Robert
|
PF10 |
SAMOLEJOVÁ Andrea |
VŠB - Technical University, Ostrava, Czech Republic, EU |
Employee Motivation to Product and Process Improvement in Czech Metallurgical Companies
|
Co-authors: LAMPA Martin & BESTA Petr
|
PF11 |
SIKOROVÁ Andrea |
VSB - Technical University, Ostrava, Czech Republic, EU |
Increase of competiveness of metallurgical companies by means of OPPI funds
|
Co-authors: MYNÁŘ Martin & WICHER Pavel
|
PF12 |
STANISŁAWSKI Robert |
Technical University of Lodz, Lodz, Poland, EU |
Role of Innovativeness in the Development of the Metal & Machine SME Sector in Poland (on the authors’ own research)
|
Co-authors: LISOWSKA Renata
|
PF13 |
VILAMOVÁ Šárka |
VSB - Technical University, Ostrava, Czech Republic, EU |
New Trends in Terms of Management in the Conditions of Metallurgy Firms
|
Co-authors: JANOVSKÁ Kamila, KOZEL Roman, VOZŇÁKOVÁ Iveta & ŠVECOVÁ Eva
|
PF14 |
WICHER Pavel |
VSB - Technical University, Ostrava, Czech Republic, EU |
Possible Applications of Resilience Concept in Metallurgical Supply Chains
|
Co-authors: LENORT Radim & KRAUSOVÁ Emilie
|
PF15 |
WITKOWSKI Krzysztof |
University of Zielona Gora, Zielona Góra, Poland, EU |
Map of Logistics Processes as a Part of Creating an Enterprise Supply Chain in the Metallurgical Company
|
ZV1 |
BAKOŠOVÁ Dana |
Trencin University of Alexander Dubcek in Puchov, Púchov, Slovakia, EU |
AFM Analysis of Copper Alloys
|
ZV2 |
BIRUKOV Alexey |
Donetsk national technical university, Donetsk, Ukraine |
Furnace Aggregates Instant Heat Balances Control
|
ZV3 |
GONCHAROV Anton |
LSTU, Lipetsk, Russian Federation |
About the Accuracy of Hot- Rolled Strips‘ Cross-Section Measured Profiles Approximation with a Second-Order Parabolic Curve
|
Co-authors: BELSKIY Sergey
|
ZV4 |
JAKÁBOVÁ Martina |
SUT, FMST in Trnava, Trnava, Slovakia, EU |
Status of Customer Relationship Management in Slovakia
|
ZV5 |
KORCHUNOV Aleksey |
Magnitogorsk State Technical University, Magnitogorsk, Russian Federation |
Formalization Control Algorithm of Carbonaceous Nanostructured Steels Structure and Properties with Indeterminate Nature of Material State Parameters
|
Co-authors: POLYAKOVA Marina
|
ZV6 |
NAMIN Reza Parastar |
Tehran Polytechnic (Amirkabir University of technology), Vancouver, Canada |
Modeling and prediction of impact behavior of functionally graded steel composites
|
Co-authors: NAEIMI Mohammad & ZAMANI Seyed Mohammad Mahdi
|
ZV7 |
OSTROWSKA-POPIELSKA Patrycja |
Institute or Iron Metallurgy, Gliwice, Poland, EU |
Technologies for Managing of Steelmaking Dust
|
Co-authors: SOREK Agata
|
ZV8 |
PAVLAS Roman |
VSB - Technical University, Ostrava, Czech Republic, EU |
Quality Control of the Manufacturing Process Using SPC Method
|
Co-authors: JANČÍK Ladislav
|
ZV9 |
POKLUDA Jaroslav |
UT, Brno, Brno, Czech Republic, EU |
Cyclic Oxidation Behaviour and Microstructure of Nickel-Based Superalloys IN 713 LC and IN 792-5A with Diffusion Coatings
|
Co-authors: KIANICOVÁ Marta
|
ZV10 |
POTECASU Florentina |
University “Dunarea de Jos” of Galati, Galati, Romania, EU |
Surface Treatment of Iron-Based Sintered Compacts for Corrosion Protection
|
Co-authors: RADU Tamara, MARIN Mihaela & CIOCAN Anisoara
|
ZV11 |
POURKHORSHIDI Sajjad |
Tehran Polytechnic (Amirkabir University of technology), Vancouver, Canada |
Manufacturing and Evaluating of Cu-based Shape Memory Alloys by Hot Extrusion of PM Samples Made by Mechanical Alloying Process
|
Co-authors: NAEIMI Mohammad, PARVIN Nader, ZAMANI Seyed Mohammad Mahdi & EBRAHIMNIA Hamid
|
ZV12 |
RADU Tamara |
University “Dunarea de Jos” of Galati, Galati, Romania, EU |
Obtaining and Characterizing Zn-Al-Bi Coatings on Steel Band
|
Co-authors: POTECASU Florentina, CIOCAN Anisoara & BALINT Lucica
|
ZV13 |
SAMEK Ludovic |
Voestalpine Stahl GmbH , Linz, Austria, EU |
High Manganese Steel for Cold-Rolled Applications: Material Properties, Processing and Potential Applications
|
Co-authors: ARENHOLZ Enno
|
ZV14 |
SAMEK Ludovic |
Voestalpine Stahl GmbH, Linz, Austria, EU |
Influence of the Thermal Processing on the Microstructure and Mechanical Properties of a High-Performance High-Manganese Steel
|
Co-authors: ARENHOLZ Enno, SCHNEIDER Reinhold & GENTIL Johannes
|
ZV15 |
SHMELEVA Nadezhda |
National University of Science, Moscow, Russian Federation |
Forming the System of Sustainable Development Indicators for Metallurgical Enterprises
|
ZV16 |
VYTLACILOVA Vladimira |
CTU in Prague, Praha, Czech Republic, EU |
Possible Use of the Crushed Slag Aggregate in Production of Fibre Reinfoced Concrete
|
Co-authors: RAINOVÁ Aneta & ŠEPS Karel
|