PV194 External Environments of Digital Systems

Faculty of Informatics
Spring 2022
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Computer Systems and Communications – Faculty of Informatics
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Timetable
Tue 15. 2. to Tue 10. 5. Tue 8:00–9:50 A217
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II and PB161 - C++ programming are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 70 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design of the intelligent digital system sensors.
Learning outcomes
Student will know basic types of sensors and will be able to incorporate them into the design of software-hardware systems.
Syllabus
  • D/A and A/D integrated circuits
  • Acoustic and ultrasonic sensors
  • Magnetic sensors, magnetometers
  • Capacitive proximity sensors
  • Accelerometers, inclinometers
  • Special digital circuits – MKO, AKO, BKO
  • Electromotor fundamentals, controlling principles,
  • Stepper motor fundamentals, controlling principles
  • Display devices, fundamentals, controlling devices
  • Data transmission circuits, device adapters, interfaces
  • Special digital devices circuits, I/O devices
  • Keyboards, one button input lines and gates
  • Digital IC realization and parameters
Literature
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Teaching methods
Lectures and individual project that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 2 parts:
1) written test - design of the intelligent sensor device;
2) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2017, Spring 2019, Spring 2020, Spring 2021.

PV194 External Environments of Digital Systems

Faculty of Informatics
Spring 2021
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Computer Systems and Communications – Faculty of Informatics
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Timetable
Thu 10:00–11:50 Virtuální místnost
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II and PB161 - C++ programming are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 70 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design of the intelligent digital system sensors.
Learning outcomes
Student will know basic types of sensors and will be able to incorporate them into the design of software-hardware systems.
Syllabus
  • D/A and A/D integrated circuits
  • Acoustic and ultrasonic sensors
  • Magnetic sensors, magnetometers
  • Capacitive proximity sensors
  • Accelerometers, inclinometers
  • Special digital circuits – MKO, AKO, BKO
  • Electromotor fundamentals, controlling principles,
  • Stepper motor fundamentals, controlling principles
  • Display devices, fundamentals, controlling devices
  • Data transmission circuits, device adapters, interfaces
  • Special digital devices circuits, I/O devices
  • Keyboards, one button input lines and gates
  • Digital IC realization and parameters
Literature
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Teaching methods
Lectures and individual project that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 2 parts:
1) written test - design of the intelligent sensor device;
2) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2017, Spring 2019, Spring 2020, Spring 2022.

PV194 External Environments of Digital Systems

Faculty of Informatics
Spring 2020
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Computer Systems and Communications – Faculty of Informatics
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Timetable
Mon 17. 2. to Fri 15. 5. Tue 10:00–11:50 C416
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II and PB161 - C++ programming are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 70 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design of the intelligent digital system sensors.
Learning outcomes
Student will know basic types of sensors and will be able to incorporate them into the design of software-hardware systems.
Syllabus
  • D/A and A/D integrated circuits
  • Acoustic and ultrasonic sensors
  • Magnetic sensors, magnetometers
  • Capacitive proximity sensors
  • Accelerometers, inclinometers
  • Special digital circuits – MKO, AKO, BKO
  • Electromotor fundamentals, controlling principles,
  • Stepper motor fundamentals, controlling principles
  • Display devices, fundamentals, controlling devices
  • Data transmission circuits, device adapters, interfaces
  • Special digital devices circuits, I/O devices
  • Keyboards, one button input lines and gates
  • Digital IC realization and parameters
Literature
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Teaching methods
Lectures and individual project that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 2 parts:
1) written test - design of the intelligent sensor device;
2) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught once in two years.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2017, Spring 2019, Spring 2021, Spring 2022.

PV194 External Environments of Digital Systems

Faculty of Informatics
Spring 2019
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Guaranteed by
doc. RNDr. Aleš Horák, Ph.D.
Department of Machine Learning and Data Processing – Faculty of Informatics
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Mon 12:00–13:50 A415
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II and PB161 - C++ programming are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 33 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design of the intelligent digital system sensors.
Syllabus
  • D/A and A/D integrated circuits
  • Acoustic and ultrasonic sensors
  • Magnetic sensors, magnetometers
  • Capacitive proximity sensors
  • Accelerometers, inclinometers
  • Special digital circuits – MKO, AKO, BKO
  • Electromotor fundamentals, controlling principles,
  • Stepper motor fundamentals, controlling principles
  • Display devices, fundamentals, controlling devices
  • Data transmission circuits, device adapters, interfaces
  • Special digital devices circuits, I/O devices
  • Keyboards, one button input lines and gates
  • Digital IC realization and parameters
Literature
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Teaching methods
Lectures and individual project that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 2 parts:
1) written test - design of the intelligent sensor device;
2) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught once in two years.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2017, Spring 2020, Spring 2021, Spring 2022.

PV194 External Environments of Digital Systems

Faculty of Informatics
Spring 2017
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (assistant)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
Guaranteed by
doc. RNDr. Aleš Horák, Ph.D.
Department of Machine Learning and Data Processing – Faculty of Informatics
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Mon 10:00–11:50 A415
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II and PB161 - C++ programming are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 33 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design of the intelligent digital system sensors.
Syllabus
  • D/A and A/D integrated circuits
  • Acoustic and ultrasonic sensors
  • Magnetic sensors, magnetometers
  • Capacitive proximity sensors
  • Accelerometers, inclinometers
  • Special digital circuits – MKO, AKO, BKO
  • Electromotor fundamentals, controlling principles,
  • Stepper motor fundamentals, controlling principles
  • Display devices, fundamentals, controlling devices
  • Data transmission circuits, device adapters, interfaces
  • Special digital devices circuits, I/O devices
  • Keyboards, one button input lines and gates
  • Digital IC realization and parameters
Literature
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Teaching methods
Lectures and individual project that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 2 parts:
1) written test - design of the intelligent sensor device;
2) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught once in two years.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2019, Spring 2020, Spring 2021, Spring 2022.

PV194 External Environments of Digital Systems

Faculty of Informatics
Spring 2013
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (assistant)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Thu 14:00–15:50 B202
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II and PB161 - C++ programming are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 32 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design of the intelligent digital system sensors.
Syllabus
  • D/A and A/D integrated circuits
  • Acoustic and ultrasonic sensors
  • Magnetic sensors, magnetometers
  • Capacitive proximity sensors
  • Accelerometers, inclinometers
  • Special digital circuits – MKO, AKO, BKO
  • Electromotor fundamentals, controlling principles,
  • Stepper motor fundamentals, controlling principles
  • Display devices, fundamentals, controlling devices
  • Data transmission circuits, device adapters, interfaces
  • Special digital devices circuits, I/O devices
  • Keyboards, one button input lines and gates
  • Digital IC realization and parameters
Literature
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Teaching methods
Lectures and individual project that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 2 parts:
1) written test - design of the intelligent sensor device;
2) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2012, Spring 2017, Spring 2019, Spring 2020, Spring 2021, Spring 2022.

PV194 External Environments of Digital Systems

Faculty of Informatics
Spring 2012
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (assistant)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Tue 8:00–9:50 B202
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II and PB161 - C++ programming are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 32 fields of study the course is directly associated with, display
Course objectives
Main aim of this courese is understand and master theoretical knowledges necessary for design of the inteligent digital system sensors.
Syllabus
  • D/A and A/D integrated circuits
  • Acoustic and ultrasonic sensors
  • Magnetic sensors, magnetometers
  • Capacitive proximity sensors
  • Accelerometers, inclinometers
  • Special digital circuits – MKO, AKO, BKO
  • Electromotor fundamentals, controlling principles,
  • Stepper motor fundamentals, controlling principles
  • Display devices, fundamentals, controlling devices
  • Data transmission circuits, device adapters, interfaces
  • Special digital devices circuits, I/O devices
  • Keyboards, one button input lines and gates
  • Digital IC realization and parameters
Literature
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Teaching methods
Lectures and individual project that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 2 parts:
1) written test - design of the inteligent sensor device;
2) oral exam - teoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2013, Spring 2017, Spring 2019, Spring 2020, Spring 2021, Spring 2022.

PV194 External Environments of Digital Systems

Faculty of Informatics
Spring 2011
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Jaroslav Čechák, Ph.D. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (assistant)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Tue 16:00–17:50 B202
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II and PB161 - C++ programming are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 36 fields of study the course is directly associated with, display
Course objectives
Main aim of this courese is understand and master theoretical knowledges necessary for design of the inteligent digital system sensors.
Syllabus
  • D/A and A/D integrated circuits
  • Acoustic and ultrasonic sensors
  • Magnetic sensors, magnetometers
  • Capacitive proximity sensors
  • Accelerometers, inclinometers
  • Special digital circuits – MKO, AKO, BKO
  • Electromotor fundamentals, controlling principles,
  • Stepper motor fundamentals, controlling principles
  • Display devices, fundamentals, controlling devices
  • Data transmission circuits, device adapters, interfaces
  • Special digital devices circuits, I/O devices
  • Keyboards, one button input lines and gates
  • Digital IC realization and parameters
Literature
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Teaching methods
Lectures and individual project that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 2 parts:
1) written test - design of the inteligent sensor device;
2) oral exam - teoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2010, Spring 2012, Spring 2013, Spring 2017, Spring 2019, Spring 2020, Spring 2021, Spring 2022.

PV194 External Environments of Digital Systems

Faculty of Informatics
Spring 2010
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (assistant)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Wed 14:00–14:50 B202
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II and PB161 - C++ programming are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 36 fields of study the course is directly associated with, display
Course objectives
Main aim of this courese is understand and master theoretical knowledges necessary for design of the inteligent digital system sensors.
Syllabus
  • Introduction;
  • audio sensors;
  • video sensors;
  • electromagnetic sensors;
  • thermal sensors;
  • rest types of the sensors.
Literature
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Teaching methods
Lectures and individual project that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 2 parts:
1) written test - design of the inteligent sensor device;
2) oral exam - teoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2011, Spring 2012, Spring 2013, Spring 2017, Spring 2019, Spring 2020, Spring 2021, Spring 2022.

PV194 External Environments of Digital Systems

Faculty of Informatics
Spring 2025

The course is not taught in Spring 2025

Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
In-person direct teaching
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Computer Systems and Communications – Faculty of Informatics
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II and PB161 - C++ programming are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 37 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design of the intelligent digital system sensors.
Learning outcomes
Student will know basic types of sensors and will be able to incorporate them into the design of software-hardware systems.
Syllabus
  • D/A and A/D integrated circuits
  • Acoustic and ultrasonic sensors
  • Magnetic sensors, magnetometers
  • Capacitive proximity sensors
  • Accelerometers, inclinometers
  • Special digital circuits – MKO, AKO, BKO
  • Electromotor fundamentals, controlling principles,
  • Stepper motor fundamentals, controlling principles
  • Display devices, fundamentals, controlling devices
  • Data transmission circuits, device adapters, interfaces
  • Special digital devices circuits, I/O devices
  • Keyboards, one button input lines and gates
  • Digital IC realization and parameters
Literature
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Teaching methods
Lectures and individual project that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 2 parts:
1) written test - design of the intelligent sensor device;
2) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
The course is taught annually.
The course is taught: every week.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2017, Spring 2019, Spring 2020, Spring 2021, Spring 2022.

PV194 External Environments of Digital Systems

Faculty of Informatics
Spring 2024

The course is not taught in Spring 2024

Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Computer Systems and Communications – Faculty of Informatics
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II and PB161 - C++ programming are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 70 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design of the intelligent digital system sensors.
Learning outcomes
Student will know basic types of sensors and will be able to incorporate them into the design of software-hardware systems.
Syllabus
  • D/A and A/D integrated circuits
  • Acoustic and ultrasonic sensors
  • Magnetic sensors, magnetometers
  • Capacitive proximity sensors
  • Accelerometers, inclinometers
  • Special digital circuits – MKO, AKO, BKO
  • Electromotor fundamentals, controlling principles,
  • Stepper motor fundamentals, controlling principles
  • Display devices, fundamentals, controlling devices
  • Data transmission circuits, device adapters, interfaces
  • Special digital devices circuits, I/O devices
  • Keyboards, one button input lines and gates
  • Digital IC realization and parameters
Literature
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Teaching methods
Lectures and individual project that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 2 parts:
1) written test - design of the intelligent sensor device;
2) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
The course is taught annually.
The course is taught: every week.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2017, Spring 2019, Spring 2020, Spring 2021, Spring 2022.

PV194 External Environments of Digital Systems

Faculty of Informatics
Spring 2023

The course is not taught in Spring 2023

Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Computer Systems and Communications – Faculty of Informatics
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II and PB161 - C++ programming are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 70 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design of the intelligent digital system sensors.
Learning outcomes
Student will know basic types of sensors and will be able to incorporate them into the design of software-hardware systems.
Syllabus
  • D/A and A/D integrated circuits
  • Acoustic and ultrasonic sensors
  • Magnetic sensors, magnetometers
  • Capacitive proximity sensors
  • Accelerometers, inclinometers
  • Special digital circuits – MKO, AKO, BKO
  • Electromotor fundamentals, controlling principles,
  • Stepper motor fundamentals, controlling principles
  • Display devices, fundamentals, controlling devices
  • Data transmission circuits, device adapters, interfaces
  • Special digital devices circuits, I/O devices
  • Keyboards, one button input lines and gates
  • Digital IC realization and parameters
Literature
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Teaching methods
Lectures and individual project that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 2 parts:
1) written test - design of the intelligent sensor device;
2) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
The course is taught annually.
The course is taught: every week.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2017, Spring 2019, Spring 2020, Spring 2021, Spring 2022.

PV194 External Environments of Digital Systems

Faculty of Informatics
Spring 2018

The course is not taught in Spring 2018

Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (assistant)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
Guaranteed by
doc. RNDr. Aleš Horák, Ph.D.
Department of Machine Learning and Data Processing – Faculty of Informatics
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II and PB161 - C++ programming are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 33 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design of the intelligent digital system sensors.
Syllabus
  • D/A and A/D integrated circuits
  • Acoustic and ultrasonic sensors
  • Magnetic sensors, magnetometers
  • Capacitive proximity sensors
  • Accelerometers, inclinometers
  • Special digital circuits – MKO, AKO, BKO
  • Electromotor fundamentals, controlling principles,
  • Stepper motor fundamentals, controlling principles
  • Display devices, fundamentals, controlling devices
  • Data transmission circuits, device adapters, interfaces
  • Special digital devices circuits, I/O devices
  • Keyboards, one button input lines and gates
  • Digital IC realization and parameters
Literature
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Teaching methods
Lectures and individual project that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 2 parts:
1) written test - design of the intelligent sensor device;
2) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
The course is taught once in two years.
The course is taught: every week.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2017, Spring 2019, Spring 2020, Spring 2021, Spring 2022.

PV194 External Environments of Digital Systems

Faculty of Informatics
Spring 2016

The course is not taught in Spring 2016

Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (assistant)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
Guaranteed by
doc. RNDr. Aleš Horák, Ph.D.
Department of Machine Learning and Data Processing – Faculty of Informatics
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II and PB161 - C++ programming are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 33 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design of the intelligent digital system sensors.
Syllabus
  • D/A and A/D integrated circuits
  • Acoustic and ultrasonic sensors
  • Magnetic sensors, magnetometers
  • Capacitive proximity sensors
  • Accelerometers, inclinometers
  • Special digital circuits – MKO, AKO, BKO
  • Electromotor fundamentals, controlling principles,
  • Stepper motor fundamentals, controlling principles
  • Display devices, fundamentals, controlling devices
  • Data transmission circuits, device adapters, interfaces
  • Special digital devices circuits, I/O devices
  • Keyboards, one button input lines and gates
  • Digital IC realization and parameters
Literature
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Teaching methods
Lectures and individual project that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 2 parts:
1) written test - design of the intelligent sensor device;
2) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
The course is taught annually.
The course is taught: every week.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2017, Spring 2019, Spring 2020, Spring 2021, Spring 2022.

PV194 External Environments of Digital Systems

Faculty of Informatics
Spring 2015

The course is not taught in Spring 2015

Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (assistant)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
Guaranteed by
doc. RNDr. Aleš Horák, Ph.D.
Department of Machine Learning and Data Processing – Faculty of Informatics
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II and PB161 - C++ programming are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 32 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design of the intelligent digital system sensors.
Syllabus
  • D/A and A/D integrated circuits
  • Acoustic and ultrasonic sensors
  • Magnetic sensors, magnetometers
  • Capacitive proximity sensors
  • Accelerometers, inclinometers
  • Special digital circuits – MKO, AKO, BKO
  • Electromotor fundamentals, controlling principles,
  • Stepper motor fundamentals, controlling principles
  • Display devices, fundamentals, controlling devices
  • Data transmission circuits, device adapters, interfaces
  • Special digital devices circuits, I/O devices
  • Keyboards, one button input lines and gates
  • Digital IC realization and parameters
Literature
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Teaching methods
Lectures and individual project that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 2 parts:
1) written test - design of the intelligent sensor device;
2) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
The course is taught annually.
The course is taught: every week.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2017, Spring 2019, Spring 2020, Spring 2021, Spring 2022.

PV194 External Environments of Digital Systems

Faculty of Informatics
Spring 2014

The course is not taught in Spring 2014

Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (assistant)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II and PB161 - C++ programming are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 32 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design of the intelligent digital system sensors.
Syllabus
  • D/A and A/D integrated circuits
  • Acoustic and ultrasonic sensors
  • Magnetic sensors, magnetometers
  • Capacitive proximity sensors
  • Accelerometers, inclinometers
  • Special digital circuits – MKO, AKO, BKO
  • Electromotor fundamentals, controlling principles,
  • Stepper motor fundamentals, controlling principles
  • Display devices, fundamentals, controlling devices
  • Data transmission circuits, device adapters, interfaces
  • Special digital devices circuits, I/O devices
  • Keyboards, one button input lines and gates
  • Digital IC realization and parameters
Literature
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Teaching methods
Lectures and individual project that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 2 parts:
1) written test - design of the intelligent sensor device;
2) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
The course is taught annually.
The course is taught: every week.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2017, Spring 2019, Spring 2020, Spring 2021, Spring 2022.

PV194 Sensors

Faculty of Informatics
Spring 2009

The course is not taught in Spring 2009

Extent and Intensity
2/0. 4 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Prerequisites
Courses PA174 - Design of Digital Computers II, PA176 - Digital Computers Architecture II, PA175 - Computer Diagnostics II, PB161 - C++ programming and PV094 - Hardware and peripherals are necessary for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 37 fields of study the course is directly associated with, display
Course objectives
Main aim of this courese is understand and master theoretical knowledges necessary for design of the inteligent digital system sensors.
Syllabus
  • Introduction;
  • audio sensors;
  • video sensors;
  • electromagnetic sensors;
  • thermal sensors;
  • rest types of the sensors.
Literature
  • Bishop; The Mechantronics Handbook; CRC; 1. Edition (February, 2002), ISBN-10: 0849300665, ISBN-13: 978-0849300660
  • Ian Sinclair Sensors and Transducers Newnes; 3 edition (May 30, 2001), ISBN-10: 0750649321, ISBN-13: 978-0750649322
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Assessment methods
Final examination consist from 2 parts:
1) written test - design of the inteligent sensor device;
2) oral exam - teoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
The course is taught annually.
The course is taught: every week.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2017, Spring 2019, Spring 2020, Spring 2021, Spring 2022.

PV194 Sensors

Faculty of Informatics
Spring 2008

The course is not taught in Spring 2008

Extent and Intensity
2/0. 4 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Prerequisites
Opening course of the study branch.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 37 fields of study the course is directly associated with, display
Course objectives
Fundamentals of the digital system sensors.
Syllabus
  • Inroduction Audio sensors Video sensors Electromagnetic sensors Tthermal sensors Rest types of sensors
Literature
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Assessment methods (in Czech)
Zkouška se skládá ze dvou částí: 1) příklad - návrh funkčního bloku číslicového systému, 2) ústní odpověď na teoretickou otázku z přehledu témat ke zkoušce.
Language of instruction
Czech
Further comments (probably available only in Czech)
The course is taught annually.
The course is taught: every week.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2017, Spring 2019, Spring 2020, Spring 2021, Spring 2022.

PV194 Sensors

Faculty of Informatics
Spring 2007

The course is not taught in Spring 2007

Extent and Intensity
2/0. 4 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Prerequisites
Opening course of the study branch.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
Course objectives
Fundamentals of the digital system sensors.
Syllabus
  • Inroduction Audio sensors Video sensors Electromagnetic sensors Tthermal sensors Rest types of sensors
Literature
  • TURÁN, Ján and Stanislav PETRÍK. Optické vláknové senzory. 1. vyd. Bratislava: Alfa, 1990, 250 s. ISBN 80-05-00655-1. info
  • GULDAN, Arnošt. Mikroelektronické senzory. 1. vyd. Bratislava: Alfa, 1987, 253 s. info
Assessment methods (in Czech)
Zkouška se skládá ze dvou částí: 1) příklad - návrh funkčního bloku číslicového systému, 2) ústní odpověď na teoretickou otázku z přehledu témat ke zkoušce.
Language of instruction
Czech
Further comments (probably available only in Czech)
The course is taught annually.
The course is taught: every week.
The course is also listed under the following terms Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2017, Spring 2019, Spring 2020, Spring 2021, Spring 2022.
  • Enrolment Statistics (recent)