Multivariate Approach to Detection of Uranium Using LIBS

a 2016

Multivariate Approach to Detection of Uranium Using LIBS

KLUS, Jakub, Petr MIKYSEK, David PROCHAZKA, Pavel POŘÍZKA, Jan NOVOTNÝ et. al.

Základní údaje

Originální název

Multivariate Approach to Detection of Uranium Using LIBS

Autoři

KLUS, Jakub (203 Česká republika), Petr MIKYSEK (203 Česká republika), David PROCHAZKA (203 Česká republika), Pavel POŘÍZKA (203 Česká republika), Jan NOVOTNÝ (203 Česká republika), Aleš HRDLIČKA (203 Česká republika, domácí), Karel NOVOTNÝ (203 Česká republika, garant, domácí) a Jozef KAISER (203 Česká republika)

Vydání

2016 Winter Conference on Plasma Spectrochemistry, 2016

Další údaje

Jazyk

angličtina

Typ výsledku

Konferenční abstrakt

Obor

10406 Analytical chemistry

Stát vydavatele

Spojené státy

Utajení

není předmětem státního či obchodního tajemství

Kód RIV

RIV/00216224:14740/16:00089400

Organizační jednotka

Středoevropský technologický institut

Klíčová slova anglicky

LIBS; Uranium detection; Multivariate approach

Změněno: 8. 3. 2017 09:10, doc. Mgr. Karel Novotný, Ph.D.

Anotace

V originále

This work aims to study the possibilities of LIBS concerning the detection of uranium precipitated in sandstones. The main challenge in uranium detection is its complex emission spectrum with very high density of spectral lines. As is it stated by Chinni et al. the number of uranium lines measured using a hollow cathode discharge lamp exceeds 5000 in the range 384.8 to 908.4 nm. Considering the spectral line broadening such line density significantly exceeds resolution of usually utilized spectrometers. In this paper two new analytical approaches are suggested to determine the relative content of uranium in the studied specimen. Prior to the LIBS technique the X-ray fluorescence analysis (XRF) was utilized for uranium presence verification. To employ this task an orthogonal double-pulse (DP) LIBS setup was utilized in order to reach high sensitivity, maintaining low crater diameter, subsequently enabling high spatial resolution chemical mapping. Sample of sandstone was mapped with spatial resolution 0.1 mm and crater diameter 50 um. The mapped area was 15x15 mm, which resulted in a chemical map of 150x150 pixels. Resulting dataset contains over 586 million data points; hence the utilization of multivariate method, principal component analysis (PCA), for mapping of uranium in selected ores is proposed. PCA is one of the fundamental projection methods in multivariate data analysis (MVDA). The input for PCA is matrix of sizes N×K, where N stands for number of objects (in our case laser pulses/ measurements) and K stands for variables (spectra recorded on detector). Statistically, PCA finds projections called principal components (PC) that approximate the data in the least squares sense. There are as many PCs as is the rank of input matrix. To each PC, a loadings vector is assigned, which defines the linear combination of variables in the original K-space that PC represents. For the reason that PCA computation is computationally extensive, representative set of 50x50 measurement points was chosen to compute the PCs. The resulting chemical map was compared to three other approaches, first of them being the PCA analysis of the whole dataset resulting in 0.99997 correlations. The second one was rather classical approach of fitting the U II line detected at 409.02 nm with pseudo-Voigt profile and the integral intensity under the fitted line taken as analytical signal. And the third one was based on assumption of seeming background increase in the short region of spectra (590 – 595 nm). The last two correlated with factor 0.947 and 0.955, respectively.

Návaznosti

ED1.1.00/02.0068, projekt VaV

Název: CEITEC - central european institute of technology

Citovat

KLUS, Jakub, Petr MIKYSEK, David PROCHAZKA, Pavel POŘÍZKA, Jan NOVOTNÝ, Aleš HRDLIČKA, Karel NOVOTNÝ a Jozef KAISER. Multivariate Approach to Detection of Uranium Using LIBS. In 2016 Winter Conference on Plasma Spectrochemistry. 2016.

@proceedings{1335839,
   author = {Klus, Jakub and Mikysek, Petr and Prochazka, David and Pořízka, Pavel and Novotný, Jan and Hrdlička, Aleš and Novotný, Karel and Kaiser, Jozef},
   booktitle = {2016 Winter Conference on Plasma Spectrochemistry},
   keywords = {LIBS; Uranium detection; Multivariate approach},
   language = {eng},
   title = {Multivariate Approach to Detection of Uranium Using LIBS},
   year = {2016}
}

TY  - CONF
ID  - 1335839
AU  - Klus, Jakub - Mikysek, Petr - Prochazka, David - Pořízka, Pavel - Novotný, Jan - Hrdlička, Aleš - Novotný, Karel - Kaiser, Jozef
PY  - 2016
TI  - Multivariate Approach to Detection of Uranium Using LIBS
KW  - LIBS
KW  - Uranium detection
KW  - Multivariate approach
N2  - This work aims to study the possibilities of LIBS concerning the detection of uranium precipitated in sandstones. The main challenge in uranium detection is its complex emission spectrum with very high density of spectral lines. As is it stated by Chinni et al. the number of uranium lines measured using a hollow cathode discharge lamp exceeds 5000 in the range 384.8 to 908.4 nm. Considering the spectral line broadening such line density significantly exceeds resolution of usually utilized spectrometers. In this paper two new analytical approaches are suggested to determine the relative content of uranium in the studied specimen. Prior to the LIBS technique the X-ray fluorescence analysis (XRF) was utilized for uranium presence verification. To employ this task an orthogonal double-pulse (DP) LIBS setup was utilized in order to reach high sensitivity, maintaining low crater diameter, subsequently enabling high spatial resolution chemical mapping. Sample of sandstone was mapped with spatial resolution 0.1 mm and crater diameter 50 um. The mapped area was 15x15 mm, which resulted in a chemical map of 150x150 pixels. Resulting dataset contains over 586 million data points; hence the utilization of multivariate method, principal component analysis (PCA), for mapping of uranium in selected ores is proposed. PCA is one of the fundamental projection methods in multivariate data analysis (MVDA). The input for PCA is matrix of sizes N×K, where N stands for number of objects (in our case laser pulses/ measurements) and K stands for variables (spectra recorded on detector). Statistically, PCA finds projections called principal components (PC) that approximate the data in the least squares sense. There are as many PCs as is the rank of input matrix. To each PC, a loadings vector is assigned, which defines the linear combination of variables in the original K-space that PC represents. For the reason that PCA computation is computationally extensive, representative set of 50x50 measurement points was chosen to compute the PCs. The resulting chemical map was compared to three other approaches, first of them being the PCA analysis of the whole dataset resulting in 0.99997 correlations. The second one was rather classical approach of fitting the U II line detected at 409.02 nm with pseudo-Voigt profile and the integral intensity under the fitted line taken as analytical signal. And the third one was based on assumption of seeming background increase in the short region of spectra (590 – 595 nm). The last two correlated with factor 0.947 and 0.955, respectively.
ER  -

KLUS, Jakub, Petr MIKYSEK, David PROCHAZKA, Pavel POŘÍZKA, Jan NOVOTNÝ, Aleš HRDLIČKA, Karel NOVOTNÝ a Jozef KAISER. Multivariate Approach to Detection of Uranium Using LIBS. In \textit{2016 Winter Conference on Plasma Spectrochemistry}. 2016.

Podrobný výpis o publikaci