ZÁBRANSKÝ, Lukáš, Vilma BURŠÍKOVÁ, Pavel SOUČEK, Petr VAŠINA a Jiří BURŠÍK. On the study of the mechanical properties of Mo-B-C coatings. The European Physical Journal - Applied Physics. EDP Sciences, 2016, roč. 75, č. 2, s. "nestrankovano", 7 s. ISSN 1286-0042. Dostupné z: https://dx.doi.org/10.1051/epjap/2016150591. |
Další formáty:
BibTeX
LaTeX
RIS
@article{1351804, author = {Zábranský, Lukáš and Buršíková, Vilma and Souček, Pavel and Vašina, Petr and Buršík, Jiří}, article_number = {2}, doi = {http://dx.doi.org/10.1051/epjap/2016150591}, keywords = {Mo2BC coatings; hardness; fracture resistance}, language = {eng}, issn = {1286-0042}, journal = {The European Physical Journal - Applied Physics}, title = {On the study of the mechanical properties of Mo-B-C coatings}, volume = {75}, year = {2016} }
TY - JOUR ID - 1351804 AU - Zábranský, Lukáš - Buršíková, Vilma - Souček, Pavel - Vašina, Petr - Buršík, Jiří PY - 2016 TI - On the study of the mechanical properties of Mo-B-C coatings JF - The European Physical Journal - Applied Physics VL - 75 IS - 2 SP - "nestrankovano" EP - "nestrankovano" PB - EDP Sciences SN - 12860042 KW - Mo2BC coatings KW - hardness KW - fracture resistance N2 - Mo2BC thin films show a favourable combination of high stiffness, hardness and elastic modulus together with moderate ductility. In this study we focused on the comparison of mechanical properties of Mo-B-C thin films with different structures (nanocrystalline or amorphous). The thin films were deposited on steel, hard metal and silicon substrates using DC magnetron sputtering. The mechanical properties of Mo-B-C films were studied using indentation techniques under both quasistatic and dynamic conditions using a wide range of loads from 50 mikroN up to 1 N. The results showed that even amorphous Mo-B-C thin films had high hardness of 19.5±0.5 GPa and elastic modulus of 276±5 GPa. Their hardness is comparable with the common amorphous diamond-like carbon coatings. Moreover, their fracture toughness is significantly higher. The results of mechanical tests were correlated with microstructure observations carried out using scanning and transmission electron microscopy. The images of the deformed area under the residual indentation imprints showed no cracking even after high loads or after indentation with sharp cube corner indenter. ER -
ZÁBRANSKÝ, Lukáš, Vilma BURŠÍKOVÁ, Pavel SOUČEK, Petr VAŠINA a Jiří BURŠÍK. On the study of the mechanical properties of Mo-B-C coatings. \textit{The European Physical Journal - Applied Physics}. EDP Sciences, 2016, roč.~75, č.~2, s.~''nestrankovano'', 7 s. ISSN~1286-0042. Dostupné z: https://dx.doi.org/10.1051/epjap/2016150591.
|