Industrial Corona Pre- and Post-treatment for Enhanced Silicone
Coating of Paper used as Release Liner

D 2018

Industrial Corona Pre- and Post-treatment for Enhanced Silicone Coating of Paper used as Release Liner

ŠTĚPÁNOVÁ, Vlasta, Dušan KOVÁČIK, Oleksandr GALMIZ, Zlata TUČEKOVÁ, Miroslav ZEMÁNEK et. al.

Základní údaje

Originální název

Industrial Corona Pre- and Post-treatment for Enhanced Silicone Coating of Paper used as Release Liner

Autoři

ŠTĚPÁNOVÁ, Vlasta (203 Česká republika, garant, domácí), Dušan KOVÁČIK (703 Slovensko, domácí), Oleksandr GALMIZ (804 Ukrajina, domácí), Zlata TUČEKOVÁ (703 Slovensko, domácí), Miroslav ZEMÁNEK (203 Česká republika, domácí), Monika STUPAVSKÁ (703 Slovensko, domácí), Jakub KELAR (203 Česká republika, domácí), Julien VALLADE (250 Francie) a Mirko ČERNÁK (703 Slovensko, domácí)

Vydání

Brno, 9th International Conference on Nanomaterials - Reseach & Application (NANOCON), od s. 271-276, 6 s. 2018

Nakladatel

TANGER Ltd., Ostrava

Další údaje

Jazyk

angličtina

Typ výsledku

Stať ve sborníku

Obor

10305 Fluids and plasma physics

Stát vydavatele

Česká republika

Utajení

není předmětem státního či obchodního tajemství

Forma vydání

paměťový nosič (CD, DVD, flash disk)

Odkazy

URL

Kód RIV

RIV/00216224:14310/18:00114984

Organizační jednotka

Přírodovědecká fakulta

ISBN

978-80-87294-81-9

UT WoS

000452823300045

Klíčová slova anglicky

release liner paper; atmospheric pressure plasma; industrial corona; silicone coating; adhesion

Štítky

Příznaky

Recenzováno

Změněno: 8. 2. 2022 12:12, Mgr. Vlasta Štěpánová, Ph.D.

Anotace

V originále

In this work, atmospheric pressure, ambient air plasma was used for pre-treatment of clay coated paper before silicone coating as well as for post-treatment to prepare the release liner with low adhesion. As a plasma source “industrial corona” in roll-to-roll configuration was used for plasma treatment. The aim of the study was to evaluate the effect of plasma pre- and post-treatment time on adhesive properties of silicone layer sprayed on the paper. Plasma pre-treated paper was sprayed with silicone oil of different amounts using spray gun and subsequently plasma post-treated for defined repetition. Surface of silicone sprayed paper was analyzed by water contact angle measurement immediately after oil spraying procedure. The possible changes in morphology were characterized by scanning electron microscopy, chemical composition by X-ray photoelectron spectroscopy and the adhesion by measuring tape peel force. The silicone coated paper was characterized by increase of hydrophobicity and decrease of release factor with significant impact of plasma post-treatment.

Návaznosti

LO1411, projekt VaV

Název: Rozvoj centra pro nízkonákladové plazmové a nanotechnologické povrchové úpravy (Akronym: CEPLANT plus)

Investor: Ministerstvo školství, mládeže a tělovýchovy ČR, Rozvoj centra pro nízkonákladové plazmové a nanotechnologické povrchové úpravy

7D16003, projekt VaV

Název: Ekologický PECVD in-line povlakovací proces pro speciální papíry pro komerční užití (Akronym: CEZANNE)

Investor: Ministerstvo školství, mládeže a tělovýchovy ČR, Commercially viable and environmentally friendly PECVD in-line coating process for speciality papers

Citovat

ŠTĚPÁNOVÁ, Vlasta, Dušan KOVÁČIK, Oleksandr GALMIZ, Zlata TUČEKOVÁ, Miroslav ZEMÁNEK, Monika STUPAVSKÁ, Jakub KELAR, Julien VALLADE a Mirko ČERNÁK. Industrial Corona Pre- and Post-treatment for Enhanced Silicone Coating of Paper used as Release Liner. In 9th International Conference on Nanomaterials - Reseach & Application (NANOCON). Brno: TANGER Ltd., Ostrava, 2018, s. 271-276. ISBN 978-80-87294-81-9.

@inproceedings{1393079,
   author = {Štěpánová, Vlasta and Kováčik, Dušan and Galmiz, Oleksandr and Tučeková, Zlata and Zemánek, Miroslav and Stupavská, Monika and Kelar, Jakub and Vallade, Julien and Černák, Mirko},
   address = {Brno},
   booktitle = {9th International Conference on Nanomaterials - Reseach & Application (NANOCON)},
   keywords = {release liner paper; atmospheric pressure plasma; industrial corona; silicone coating; adhesion},
   howpublished = {paměťový nosič},
   language = {eng},
   location = {Brno},
   isbn = {978-80-87294-81-9},
   pages = {271-276},
   publisher = {TANGER Ltd., Ostrava},
   title = {Industrial Corona Pre- and Post-treatment for Enhanced Silicone Coating of Paper used as Release Liner},
   url = {https://www.confer.cz/nanocon/2017/read/329-industrial-corona-pre-and-post-treatment-for-enhanced-silicone-coating-of-paper-used-as-release-liner.pdf},
   year = {2018}
}

TY  - JOUR
ID  - 1393079
AU  - Štěpánová, Vlasta - Kováčik, Dušan - Galmiz, Oleksandr - Tučeková, Zlata - Zemánek, Miroslav - Stupavská, Monika - Kelar, Jakub - Vallade, Julien - Černák, Mirko
PY  - 2018
TI  - Industrial Corona Pre- and Post-treatment for Enhanced Silicone Coating of Paper used as Release Liner
PB  - TANGER Ltd., Ostrava
CY  - Brno
SN  - 9788087294819
KW  - release liner paper
KW  - atmospheric pressure plasma
KW  - industrial corona
KW  - silicone coating
KW  - adhesion
UR  - https://www.confer.cz/nanocon/2017/read/329-industrial-corona-pre-and-post-treatment-for-enhanced-silicone-coating-of-paper-used-as-release-liner.pdf
N2  - In this work, atmospheric pressure, ambient air plasma was used for pre-treatment of clay coated paper before silicone coating as well as for post-treatment to prepare the release liner with low adhesion. As a plasma source “industrial corona” in roll-to-roll configuration was used for plasma treatment. The aim of the study was to evaluate the effect of plasma pre- and post-treatment time on adhesive properties of silicone layer sprayed on the paper. Plasma pre-treated paper was sprayed with silicone oil of different amounts using spray gun and subsequently plasma post-treated for defined repetition. Surface of silicone sprayed paper was analyzed by water contact angle measurement immediately after oil spraying procedure. The possible changes in morphology were characterized by scanning electron microscopy, chemical composition by X-ray photoelectron spectroscopy and the adhesion by measuring tape peel force. The silicone coated paper was characterized by increase of hydrophobicity and decrease of release factor with significant impact of plasma post-treatment.
ER  -

ŠTĚPÁNOVÁ, Vlasta, Dušan KOVÁČIK, Oleksandr GALMIZ, Zlata TUČEKOVÁ, Miroslav ZEMÁNEK, Monika STUPAVSKÁ, Jakub KELAR, Julien VALLADE a Mirko ČERNÁK. Industrial Corona Pre- and Post-treatment for Enhanced Silicone Coating of Paper used as Release Liner. In \textit{9th International Conference on Nanomaterials - Reseach \&{} Application (NANOCON)}. Brno: TANGER Ltd., Ostrava, 2018, s.~271-276. ISBN~978-80-87294-81-9.

Podrobný výpis o publikaci