Properties of Multimode Optical Epoxy Polymer Waveguides
Deposited on Silicon and TOPAS Substrate

J 2017

Properties of Multimode Optical Epoxy Polymer Waveguides Deposited on Silicon and TOPAS Substrate

PRAJZLER, V., M. NERUDA, P. NEKVINDOVÁ a Petr MIKULÍK

Základní údaje

Originální název

Properties of Multimode Optical Epoxy Polymer Waveguides Deposited on Silicon and TOPAS Substrate

Autoři

PRAJZLER, V. (203 Česká republika), M. NERUDA (203 Česká republika), P. NEKVINDOVÁ (203 Česká republika) a Petr MIKULÍK (203 Česká republika, domácí)

Vydání

Radioengineering, PRAHA, SPOLECNOST PRO RADIOELEKTRONICKE INZENYRSTVI, 2017, 1210-2512

Další údaje

Jazyk

angličtina

Typ výsledku

Článek v odborném periodiku

Obor

10306 Optics

Stát vydavatele

Česká republika

Utajení

není předmětem státního či obchodního tajemství

Odkazy

URL

Impakt faktor

Impact factor: 1.048

Kód RIV

RIV/00216224:14310/17:00099920

Organizační jednotka

Přírodovědecká fakulta

DOI

http://dx.doi.org/10.13164/re.2017.0010

UT WoS

000399735900002

Klíčová slova anglicky

Optical planar waveguides; optical rectangular waveguides; multimode waveguides; polymer

Štítky

NZ, rivok

Příznaky

Recenzováno

Změněno: 11. 4. 2018 08:37, Ing. Nicole Zrilić

Anotace

V originále

The paper reports on the fabrication and characterization of multimode polymer optical waveguides. Epoxy polymer EpoCore was used as the waveguide core material and EpoClad was used as a cladding and cover protection layer. The design of the waveguides was schemed for geometric dimensions of 50 mu m core and for 850 nm and 1310 nm wavelengths. Proposed shapes of the waveguides were fabricated by standard photolithography process. Optical losses of the planar waveguides were measured by the fibre probe technique at 632.8 nm and 964 nm. Propagation optical loss measurements for rectangular waveguides were done by using the cut-back method and the best samples had optical losses lower than 0.53 dB/cm at 650 nm, 850 nm and 1310 nm.

Citovat

PRAJZLER, V., M. NERUDA, P. NEKVINDOVÁ a Petr MIKULÍK. Properties of Multimode Optical Epoxy Polymer Waveguides Deposited on Silicon and TOPAS Substrate. Radioengineering. PRAHA: SPOLECNOST PRO RADIOELEKTRONICKE INZENYRSTVI, 2017, roč. 26, č. 1, s. 10-15. ISSN 1210-2512. Dostupné z: https://dx.doi.org/10.13164/re.2017.0010.

@article{1407046,
   author = {Prajzler, V. and Neruda, M. and Nekvindová, P. and Mikulík, Petr},
   article_location = {PRAHA},
   article_number = {1},
   doi = {http://dx.doi.org/10.13164/re.2017.0010},
   keywords = {Optical planar waveguides; optical rectangular waveguides; multimode waveguides; polymer},
   language = {eng},
   issn = {1210-2512},
   journal = {Radioengineering},
   title = {Properties of Multimode Optical Epoxy Polymer Waveguides Deposited on Silicon and TOPAS Substrate},
   url = {https://www.radioeng.cz/papers/2017-1.htm},
   volume = {26},
   year = {2017}
}

TY  - JOUR
ID  - 1407046
AU  - Prajzler, V. - Neruda, M. - Nekvindová, P. - Mikulík, Petr
PY  - 2017
TI  - Properties of Multimode Optical Epoxy Polymer Waveguides Deposited on Silicon and TOPAS Substrate
JF  - Radioengineering
VL  - 26
IS  - 1
SP  - 10-15
EP  - 10-15
PB  - SPOLECNOST PRO RADIOELEKTRONICKE INZENYRSTVI
SN  - 12102512
KW  - Optical planar waveguides
KW  - optical rectangular waveguides
KW  - multimode waveguides
KW  - polymer
UR  - https://www.radioeng.cz/papers/2017-1.htm
L2  - https://www.radioeng.cz/papers/2017-1.htm
N2  - The paper reports on the fabrication and characterization of multimode polymer optical waveguides. Epoxy polymer EpoCore was used as the waveguide core material and EpoClad was used as a cladding and cover protection layer. The design of the waveguides was schemed for geometric dimensions of 50 mu m core and for 850 nm and 1310 nm wavelengths. Proposed shapes of the waveguides were fabricated by standard photolithography process. Optical losses of the planar waveguides were measured by the fibre probe technique at 632.8 nm and 964 nm. Propagation optical loss measurements for rectangular waveguides were done by using the cut-back method and the best samples had optical losses lower than 0.53 dB/cm at 650 nm, 850 nm and 1310 nm.
ER  -

PRAJZLER, V., M. NERUDA, P. NEKVINDOVÁ a Petr MIKULÍK. Properties of Multimode Optical Epoxy Polymer Waveguides Deposited on Silicon and TOPAS Substrate. \textit{Radioengineering}. PRAHA: SPOLECNOST PRO RADIOELEKTRONICKE INZENYRSTVI, 2017, roč.~26, č.~1, s.~10-15. ISSN~1210-2512. Dostupné z: https://dx.doi.org/10.13164/re.2017.0010.

Podrobný výpis o publikaci