KELAR TUČEKOVÁ, Zlata, Oleksandr GALMIZ, Jakub KELAR, Dušan KOVÁČIK, Monika STUPAVSKÁ, Petra ŠRÁMKOVÁ, Miroslav ZEMÁNEK, Julien VALLADE a Mirko ČERNÁK. Adhesive Properties of Silicone-Coated Release Liner Paper Enhanced by Atmospheric Pressure Plasma Pre- and Post-Treatment. Coatings. Basel: MDPI, 2020, roč. 10, č. 11, s. 1-13. ISSN 2079-6412. Dostupné z: https://dx.doi.org/10.3390/coatings10111102. |
Další formáty:
BibTeX
LaTeX
RIS
@article{1695600, author = {Kelar Tučeková, Zlata and Galmiz, Oleksandr and Kelar, Jakub and Kováčik, Dušan and Stupavská, Monika and Šrámková, Petra and Zemánek, Miroslav and Vallade, Julien and Černák, Mirko}, article_location = {Basel}, article_number = {11}, doi = {http://dx.doi.org/10.3390/coatings10111102}, keywords = {release liner; clay-coated paper; silicone coating; adhesion; wettability changes; aging; plasma treatment; atmospheric pressure plasma}, language = {eng}, issn = {2079-6412}, journal = {Coatings}, title = {Adhesive Properties of Silicone-Coated Release Liner Paper Enhanced by Atmospheric Pressure Plasma Pre- and Post-Treatment}, url = {https://doi.org/10.3390/coatings10111102}, volume = {10}, year = {2020} }
TY - JOUR ID - 1695600 AU - Kelar Tučeková, Zlata - Galmiz, Oleksandr - Kelar, Jakub - Kováčik, Dušan - Stupavská, Monika - Šrámková, Petra - Zemánek, Miroslav - Vallade, Julien - Černák, Mirko PY - 2020 TI - Adhesive Properties of Silicone-Coated Release Liner Paper Enhanced by Atmospheric Pressure Plasma Pre- and Post-Treatment JF - Coatings VL - 10 IS - 11 SP - 1-13 EP - 1-13 PB - MDPI SN - 20796412 KW - release liner KW - clay-coated paper KW - silicone coating KW - adhesion KW - wettability changes KW - aging KW - plasma treatment KW - atmospheric pressure plasma UR - https://doi.org/10.3390/coatings10111102 L2 - https://doi.org/10.3390/coatings10111102 N2 - For release-liner preparation, coating stabilization of the silicone layer on base paper often requires pre- and post-treatment. In this study, we used atmospheric pressure diffuse coplanar surface barrier discharge in roll-to-roll configuration. The results of prepared coating showed that the A4 size clay-coated paper sprayed with silicone oil (0.25–0.50 mL) gradually decreased the tape peeling force (180°) with prolonged and repeated air plasma post-treatment. Best results showing increased hydrophobicity and significantly enhanced release factor of the coating were obtained after the plasma treatment in a nitrogen atmosphere. The silicone coating on the clay-coated paper reduced the reference release force from 5.5 N/cm to less than 1.5 N/cm after the repeated silicone spraying and short nitrogen plasma post-treatment. The results of X-ray photoelectron spectroscopy and scanning electron microscopy indicate silicone curing by plasma post-treatment and pore-closing of base paper without changes of the bulk material. The aging test lasting 3 months revealed the stability of the prepared coating. ER -
KELAR TUČEKOVÁ, Zlata, Oleksandr GALMIZ, Jakub KELAR, Dušan KOVÁČIK, Monika STUPAVSKÁ, Petra ŠRÁMKOVÁ, Miroslav ZEMÁNEK, Julien VALLADE a Mirko ČERNÁK. Adhesive Properties of Silicone-Coated Release Liner Paper Enhanced by Atmospheric Pressure Plasma Pre- and Post-Treatment. \textit{Coatings}. Basel: MDPI, 2020, roč.~10, č.~11, s.~1-13. ISSN~2079-6412. Dostupné z: https://dx.doi.org/10.3390/coatings10111102.
|