KRTIČKA, Milan, Lenka MICHLOVSKA, Vladimír NEKUDA, Petr POLACEK, Kristyna VALOVA, Jan ZIDEK, Jozef KAISER, Tomas ZIKMUND a Lucy VOJTOVA. Ex-vivo biomechanical testing of pig femur diaphysis B type fracture fixed by novel biodegradable bone glue. Journal of the Mechanical Behavior of Biomedical Materials. Elsevier: Amsterdam, 2021, roč. 115, MAR 2021, s. 1-8. ISSN 1751-6161. Dostupné z: https://dx.doi.org/10.1016/j.jmbbm.2020.104249.
Další formáty:   BibTeX LaTeX RIS
Základní údaje
Originální název Ex-vivo biomechanical testing of pig femur diaphysis B type fracture fixed by novel biodegradable bone glue
Autoři KRTIČKA, Milan (203 Česká republika, domácí), Lenka MICHLOVSKA (203 Česká republika), Vladimír NEKUDA (203 Česká republika, domácí), Petr POLACEK (203 Česká republika), Kristyna VALOVA (203 Česká republika), Jan ZIDEK (203 Česká republika), Jozef KAISER, Tomas ZIKMUND (203 Česká republika) a Lucy VOJTOVA (203 Česká republika, garant).
Vydání Journal of the Mechanical Behavior of Biomedical Materials, Elsevier, Amsterdam, 2021, 1751-6161.
Další údaje
Originální jazyk angličtina
Typ výsledku Článek v odborném periodiku
Obor 20601 Medical engineering
Stát vydavatele Nizozemské království
Utajení není předmětem státního či obchodního tajemství
WWW URL
Impakt faktor Impact factor: 4.042
Kód RIV RIV/00216224:14110/21:00121776
Organizační jednotka Lékařská fakulta
Doi http://dx.doi.org/10.1016/j.jmbbm.2020.104249
UT WoS 000618732700001
Klíčová slova anglicky Adhesive; Fracture; Bone; Ex-vivo; Biomechanics; Rheology; Thixotropy; Biodegradable polymer; Microtomography
Štítky 14110232, rivok
Příznaky Mezinárodní význam, Recenzováno
Změnil Změnila: Mgr. Tereza Miškechová, učo 341652. Změněno: 15. 6. 2021 10:02.
Anotace
Aims: The aim of this study was to answer the question whether our newly developed injectable biodegradable "self-setting" polymer-composite as a bone adhesive is a good "bone-glue" candidate to efficiently fix comminuted fractures of pig femoral bones used as an ex-vivo experimental model. Methods: Mechanical properties of adhesive prepared from mtricalcium phosphate (TCP) powder and thermogelling copolymer were optimized by selecting the appropriate composition with adhesion enhancers based on dopamine and sodium iodinate. Setting time and injectability were controlled by rheology. Ex-vivo experiments of fixed pig bones were provided in terms of either the three-point bending test of bending wedge type fractured pig femurs (with LCP) or the axial compression test of 45 degrees oblique fractured femurs (without LCP) in physiological saline solution at 37 degrees C. Fractured bones treated with optimized adhesive before and after bending tests were imaged by X-ray microtomography (mu CT). Results: Based on the rheological measurement, the adhesive modified with both dopamine and sodium iodinate exhibited optimal thixotropic properties required for injection via thin 22 G needle. This optimal adhesive composition showed an 8 min lag phase (processing time) followed by fast increase in storage modulus at 37 degrees C up to 1 GPa within 110 min. Self-setting of dopamine/iodinate modified adhesive was completed in 48 h exhibiting the maximum strength at compression of 7.98 MPa +/- 1.39 MPa. Whereas unmodified adhesive failed in glue-to-bone adhesion, dopamine and dopamine/iodinate modified adhesive used for 45 degrees oblique fracture fixation showed good and similar strength at compression (3.05 and 2.79 MPa, respectively). However, significantly higher elasticity of about 250% exhibited adhesive with iodinate enhancer. Moreover, mechanical properties of B2 fractures fixed with both LCP and dopamine/iodinate adhesive were approaching closely to the properties of original bone. Excellent adhesion between the adhesive and the bone fragments was proved by mu CT. Conclusion: The polymer-composite bone adhesive modified with dopamine/iodinate exhibited very good fixation ability of femoral artificial comminuted fractures in an experimental model.
Návaznosti
LQ1601, projekt VaVNázev: CEITEC 2020 (Akronym: CEITEC2020)
Investor: Ministerstvo školství, mládeže a tělovýchovy ČR, CEITEC 2020
VytisknoutZobrazeno: 25. 7. 2024 18:29