Adhesion improvement on the inner side of LLDPE/PA tubular film
exposed to DCSBD roll-to-roll plasma system from the outer side
of the film

J 2023

Adhesion improvement on the inner side of LLDPE/PA tubular film exposed to DCSBD roll-to-roll plasma system from the outer side of the film

ŠTĚPÁNOVÁ, Vlasta, Petra ŠRÁMKOVÁ, Slavomír SIHELNÍK, Miroslav ZEMÁNEK, Jana JURMANOVÁ et. al.

Základní údaje

Originální název

Adhesion improvement on the inner side of LLDPE/PA tubular film exposed to DCSBD roll-to-roll plasma system from the outer side of the film

Autoři

ŠTĚPÁNOVÁ, Vlasta (203 Česká republika, garant, domácí), Petra ŠRÁMKOVÁ (703 Slovensko, domácí), Slavomír SIHELNÍK (703 Slovensko, domácí), Miroslav ZEMÁNEK (203 Česká republika, domácí), Jana JURMANOVÁ (203 Česká republika, domácí), Monika STUPAVSKÁ (703 Slovensko, domácí) a Dušan KOVÁČIK (703 Slovensko, domácí)

Vydání

Plasma Processes and Polymers, Wiley-VCH GmbH, 2023, 1612-8850

Další údaje

Jazyk

angličtina

Typ výsledku

Článek v odborném periodiku

Obor

10305 Fluids and plasma physics

Stát vydavatele

Německo

Utajení

není předmětem státního či obchodního tajemství

Odkazy

URL

Impakt faktor

Impact factor: 3.500 v roce 2022

Kód RIV

RIV/00216224:14310/23:00130339

Organizační jednotka

Přírodovědecká fakulta

DOI

http://dx.doi.org/10.1002/ppap.202200226

UT WoS

000930185800001

Klíčová slova anglicky

DCSBD; film‐to‐meat adhesion; food packaging; LLDPE/PA tubular film; roll‐to‐roll reactor

Štítky

rivok

Příznaky

Mezinárodní význam, Recenzováno

Změněno: 26. 3. 2024 14:41, Mgr. Marie Šípková, DiS.

Anotace

V originále

Diffuse coplanar surface barrier discharge (DCSBD) was used to activate the opposite side of the plasma-exposed linear low-density polyethylene/polyamide (LLDPE/PA) tubular film of multilayer casing. We determined that conductive metal rubber roller in the DCSBD system allowed the formation of microfilaments perpendicular to the film surface, resulting in improved wettability and adhesion of inner LLDPE side of the tubular film. These findings were supported by increasing the concentration of polar functional groups. Based on these remarkable outcomes obtained after a very short plasma exposure time of 0.5 s, DCSBD roll-to-roll system in proper arrangement affords adhesion improvement of the opposite side of the treated film without any material damage, hence can compete with industrial corona in commercial sphere of plasma treatments.

Návaznosti

LM2018097, projekt VaV

Název: Centrum výzkumu a vývoje plazmatu a nanotechnologických povrchových úprav (Akronym: CEPLANT)

Investor: Ministerstvo školství, mládeže a tělovýchovy ČR, R&D centre for plasma and nanotechnology surface modifications

Přiložené soubory

2256477.pdf

Vyhledat podobné dokumenty

Citovat

ŠTĚPÁNOVÁ, Vlasta, Petra ŠRÁMKOVÁ, Slavomír SIHELNÍK, Miroslav ZEMÁNEK, Jana JURMANOVÁ, Monika STUPAVSKÁ a Dušan KOVÁČIK. Adhesion improvement on the inner side of LLDPE/PA tubular film exposed to DCSBD roll-to-roll plasma system from the outer side of the film. Plasma Processes and Polymers. Wiley-VCH GmbH, 2023, roč. 20, č. 5, s. 1-13. ISSN 1612-8850. Dostupné z: https://dx.doi.org/10.1002/ppap.202200226.

@article{2256477,
   author = {Štěpánová, Vlasta and Šrámková, Petra and Sihelník, Slavomír and Zemánek, Miroslav and Jurmanová, Jana and Stupavská, Monika and Kováčik, Dušan},
   article_number = {5},
   doi = {http://dx.doi.org/10.1002/ppap.202200226},
   keywords = {DCSBD; film‐to‐meat adhesion; food packaging; LLDPE/PA tubular film; roll‐to‐roll reactor},
   language = {eng},
   issn = {1612-8850},
   journal = {Plasma Processes and Polymers},
   title = {Adhesion improvement on the inner side of LLDPE/PA tubular film exposed to DCSBD roll-to-roll plasma system from the outer side of the film},
   url = {https://doi.org/10.1002/ppap.202200226},
   volume = {20},
   year = {2023}
}

TY  - JOUR
ID  - 2256477
AU  - Štěpánová, Vlasta - Šrámková, Petra - Sihelník, Slavomír - Zemánek, Miroslav - Jurmanová, Jana - Stupavská, Monika - Kováčik, Dušan
PY  - 2023
TI  - Adhesion improvement on the inner side of LLDPE/PA tubular film exposed to DCSBD roll-to-roll plasma system from the outer side of the film
JF  - Plasma Processes and Polymers
VL  - 20
IS  - 5
SP  - 1-13
EP  - 1-13
PB  - Wiley-VCH GmbH
SN  - 16128850
KW  - DCSBD
KW  - film‐to‐meat adhesion
KW  - food packaging
KW  - LLDPE/PA tubular film
KW  - roll‐to‐roll reactor
UR  - https://doi.org/10.1002/ppap.202200226
N2  - Diffuse coplanar surface barrier discharge (DCSBD) was used to activate the opposite side of the plasma-exposed linear low-density polyethylene/polyamide (LLDPE/PA) tubular film of multilayer casing. We determined that conductive metal rubber roller in the DCSBD system allowed the formation of microfilaments perpendicular to the film surface, resulting in improved wettability and adhesion of inner LLDPE side of the tubular film. These findings were supported by increasing the concentration of polar functional groups. Based on these remarkable outcomes obtained after a very short plasma exposure time of 0.5 s, DCSBD roll-to-roll system in proper arrangement affords adhesion improvement of the opposite side of the treated film without any material damage, hence can compete with industrial corona in commercial sphere of plasma treatments.
ER  -

ŠTĚPÁNOVÁ, Vlasta, Petra ŠRÁMKOVÁ, Slavomír SIHELNÍK, Miroslav ZEMÁNEK, Jana JURMANOVÁ, Monika STUPAVSKÁ a Dušan KOVÁČIK. Adhesion improvement on the inner side of LLDPE/PA tubular film exposed to DCSBD roll-to-roll plasma system from the outer side of the film. \textit{Plasma Processes and Polymers}. Wiley-VCH GmbH, 2023, roč.~20, č.~5, s.~1-13. ISSN~1612-8850. Dostupné z: https://dx.doi.org/10.1002/ppap.202200226.

Podrobný výpis o publikaci