| JANŮ, Lucie, Eva DVOŘÁKOVÁ, Kateřina POLÁŠKOVÁ, Martina BUCHTELOVÁ, Petr RYŠÁNEK, Zdeněk CHLUP, Tomáš KRUML, Oleksandr GALMIZ, David NEČAS a Lenka ZAJÍČKOVÁ. Enhanced Adhesion of Electrospun Polycaprolactone Nanofibers to Plasma-Modified Polypropylene Fabric. Polymers. MDPI, 2023, roč. 15, č. 7, s. 1-17. ISSN 2073-4360. Dostupné z: https://dx.doi.org/10.3390/polym15071686. |
Další formáty:
BibTeX
LaTeX
RIS
@article{2281938,
author = {Janů, Lucie and Dvořáková, Eva and Polášková, Kateřina and Buchtelová, Martina and Ryšánek, Petr and Chlup, Zdeněk and Kruml, Tomáš and Galmiz, Oleksandr and Nečas, David and Zajíčková, Lenka},
article_number = {7},
doi = {http://dx.doi.org/10.3390/polym15071686},
keywords = {electrospinning; PCL nanofibers; PP fabric; composite; adhesion; low-pressure plasma modification; atmospheric pressure plasma jet; loop test; tensile test},
language = {eng},
issn = {2073-4360},
journal = {Polymers},
title = {Enhanced Adhesion of Electrospun Polycaprolactone Nanofibers to Plasma-Modified Polypropylene Fabric},
url = {https://doi.org/10.3390/polym15071686},
volume = {15},
year = {2023}
}
TY - JOUR
ID - 2281938
AU - Janů, Lucie - Dvořáková, Eva - Polášková, Kateřina - Buchtelová, Martina - Ryšánek, Petr - Chlup, Zdeněk - Kruml, Tomáš - Galmiz, Oleksandr - Nečas, David - Zajíčková, Lenka
PY - 2023
TI - Enhanced Adhesion of Electrospun Polycaprolactone Nanofibers to Plasma-Modified Polypropylene Fabric
JF - Polymers
VL - 15
IS - 7
SP - 1-17
EP - 1-17
PB - MDPI
SN - 20734360
KW - electrospinning
KW - PCL nanofibers
KW - PP fabric
KW - composite
KW - adhesion
KW - low-pressure plasma modification
KW - atmospheric pressure plasma jet
KW - loop test
KW - tensile test
UR - https://doi.org/10.3390/polym15071686
N2 - Excellent adhesion of electrospun nanofiber (NF) to textile support is crucial for a broad range of their bioapplications, e.g., wound dressing development. We compared the effect of several low- and atmospheric pressure plasma modifications on the adhesion between two parts of composite—polycaprolactone (PCL) nanofibrous mat (functional part) and polypropylene (PP) spunbond fabric (support). The support fabrics were modified before electrospinning by low-pressure plasma oxygen treatment or amine plasma polymer thin film or treated by atmospheric pressure plasma slit jet (PSJ) in argon or argon/nitrogen. The adhesion was evaluated by tensile test and loop test adapted for thin NF mat measurement and the trends obtained by both tests largely agreed. Although all modifications improved the adhesion significantly (at least twice for PSJ treatments), low-pressure oxygen treatment showed to be the most effective as it strengthened adhesion by a factor of six. The adhesion improvement was ascribed to the synergic effect of high treatment homogeneity with the right ratio of surface functional groups and sufficient wettability. The low-pressure modified fabric also stayed long-term hydrophilic (ten months), even though surfaces usually return to a non-wettable state (hydrophobic recovery). In contrast to XPS, highly surface-sensitive water contact angle measurement proved suitable for monitoring subtle surface changes.
ER -
JANŮ, Lucie, Eva DVOŘÁKOVÁ, Kateřina POLÁŠKOVÁ, Martina BUCHTELOVÁ, Petr RYŠÁNEK, Zdeněk CHLUP, Tomáš KRUML, Oleksandr GALMIZ, David NEČAS a Lenka ZAJÍČKOVÁ. Enhanced Adhesion of Electrospun Polycaprolactone Nanofibers to Plasma-Modified Polypropylene Fabric. \textit{Polymers}. MDPI, 2023, roč.~15, č.~7, s.~1-17. ISSN~2073-4360. Dostupné z: https://dx.doi.org/10.3390/polym15071686.
|
