Další formáty:
BibTeX
LaTeX
RIS
@article{2352388,
author = {Polášková, Kateřina and Ozkan, Alp and Klíma, Miloš and Jeníková, Zdenka and Buddhadasa, Madhuwanthi and Reniers, Francois and Zajíčková, Lenka},
article_location = {Weinheim},
article_number = {11},
doi = {http://dx.doi.org/10.1002/ppap.202300031},
keywords = {adhesion; arc-based jet; low-temperature plasma jet; plasma treatment; poly(propylene) (PP)},
language = {eng},
issn = {1612-8850},
journal = {Plasma processes and polymers},
title = {Comparing efficiencies of polypropylene treatment by atmospheric pressure plasma jets},
url = {https://doi.org/10.1002/ppap.202300031},
volume = {20},
year = {2023}
}
TY - JOUR
ID - 2352388
AU - Polášková, Kateřina - Ozkan, Alp - Klíma, Miloš - Jeníková, Zdenka - Buddhadasa, Madhuwanthi - Reniers, Francois - Zajíčková, Lenka
PY - 2023
TI - Comparing efficiencies of polypropylene treatment by atmospheric pressure plasma jets
JF - Plasma processes and polymers
VL - 20
IS - 11
SP - 1-18
EP - 1-18
PB - Wiley-VCH
SN - 16128850
KW - adhesion
KW - arc-based jet
KW - low-temperature plasma jet
KW - plasma treatment
KW - poly(propylene) (PP)
UR - https://doi.org/10.1002/ppap.202300031
N2 - Plasma treatment of polypropylene (PP) is a well-established method of improving its surface properties. However, the efficiencies of different plasma discharges are seldom compared. Herein, we discuss the differences in PP treated by three arc-based commercial plasma jets working in dry air, Plasmatreat rotating plasma jet (PT-RPJ), AFS PlasmaJet & REG; (AFS-PJ), and SurfaceTreat gliding arc jet (ST-GA), and by the low-temperature RF plasma slit jet (RF-PSJ) working in argon. The AFS-PJ has a significantly different reactive species composition dominated by nitrogen oxides. It induced higher thermal loads leading to surface damage. The other arc-based jets (PT-RPJ and ST-GA) created the PP surface with higher oxygen and nitrogen concentration than the low-temperature RF-PSJ. It induced a higher adhesion strength measured on PP-aluminum joints.
ER -
POLÁŠKOVÁ, Kateřina, Alp OZKAN, Miloš KLÍMA, Zdenka JENÍKOVÁ, Madhuwanthi BUDDHADASA, Francois RENIERS a Lenka ZAJÍČKOVÁ. Comparing efficiencies of polypropylene treatment by atmospheric pressure plasma jets. \textit{Plasma processes and polymers}. Weinheim: Wiley-VCH, 2023, roč.~20, č.~11, s.~1-18. ISSN~1612-8850. Dostupné z: https://dx.doi.org/10.1002/ppap.202300031.
|
