Integration of 3D printing technology into teaching in primary
and secondary schools. Certified Methodology

c 2023

Integration of 3D printing technology into teaching in primary and secondary schools. Certified Methodology

DOSEDLA, Martin, Zdeněk HODIS, Martina JANČOVÁ, Jiří LEDVINKA, Leni LVOVSKÁ et. al.

Základní údaje

Originální název

Integration of 3D printing technology into teaching in primary and secondary schools. Certified Methodology

Název česky

Integrace technologie 3D tisku do výuky na základních a středních školách. Ověřená metodika

Autoři

Vydání

1. vyd. Brno, odborné a technické vzdělávání, 2023

Nakladatel

Masaryk University Press

Další údaje

Jazyk

angličtina

Typ výsledku

Učební texty pomůcky (vč. dílčích kapitol v učebnicích)

Obor

50301 Education, general; including training, pedagogy, didactics [and education systems]

Stát vydavatele

Česká republika

Utajení

není předmětem státního či obchodního tajemství

Forma vydání

elektronická verze "online"

Odkazy

Čítárna Munispace

Organizační jednotka

Pedagogická fakulta

ISBN

978-80-280-0350-0

Klíčová slova anglicky

methodology; 3D printing; teaching; primary schools; secondary schools; teaching aids

Příznaky

Recenzováno

Změněno: 11. 3. 2024 12:04, Mgr. Daniela Marcollová

Anotace

V originále

With the development of 3D printing technology in recent years, there has been a significant decrease in the price of printers and thus an increase in the availability of this technology. This technological area opens up new possibilities in a wide range of fields from industry, medicine, construction and architecture to the level of everyday home use. We also see a huge didactic potential in 3D technology, which is currently not being used. The implementation of 3D technologies in teaching at primary and secondary schools enables the creation of completely new types of teaching aids and increases the availability of teaching models for pupils and students. Students can work with teaching models in class and, with methodological supports, they also actively participate in their creation.

Návaznosti

TL03000425, projekt VaV

Název: 3D tisk a jeho uplatnění na základních a středních školách (Akronym: 3DPrintInSchools)

Investor: Technologická agentura ČR, 3D tisk a jeho uplatnění na základních a středních školách

Citovat

DOSEDLA, Martin, Zdeněk HODIS, Martina JANČOVÁ, Jiří LEDVINKA, Leni LVOVSKÁ, Kamil MALINKA, Darina MÍSAŘOVÁ, Pavla PITNEROVÁ, Vladimír SCHINDLER, Vojtěch STANĚK, Libuše VODOVÁ a Tomáš STAUDEK. Integration of 3D printing technology into teaching in primary and secondary schools. Certified Methodology. Online. 1. vyd. Brno: Masaryk University Press, 2023. odborné a technické vzdělávání. ISBN 978-80-280-0350-0.

@misc{2376197,
   author = {Dosedla, Martin and Hodis, Zdeněk and Jančová, Martina and Ledvinka, Jiří and Lvovská, Leni and Malinka, Kamil and Mísařová, Darina and Pitnerová, Pavla and Schindler, Vladimír and Staněk, Vojtěch and Vodová, Libuše and Staudek, Tomáš},
   address = {Brno},
   edition = {1},
   keywords = {methodology; 3D printing; teaching; primary schools; secondary schools; teaching aids},
   howpublished = {elektronická verze "online"},
   language = {eng},
   location = {Brno},
   isbn = {978-80-280-0350-0},
   publisher = {Masaryk University Press},
   title = {Integration of 3D printing technology into teaching in primary and secondary schools. Certified Methodology},
   url = {https://munispace.muni.cz/library/catalog/book/2245},
   year = {2023}
}

TY  - GEN
ID  - 2376197
AU  - Dosedla, Martin - Hodis, Zdeněk - Jančová, Martina - Ledvinka, Jiří - Lvovská, Leni - Malinka, Kamil - Mísařová, Darina - Pitnerová, Pavla - Schindler, Vladimír - Staněk, Vojtěch - Vodová, Libuše - Staudek, Tomáš
PY  - 2023
TI  - Integration of 3D printing technology into teaching in primary and secondary schools. Certified Methodology
VL  - odborné a technické vzdělávání
PB  - Masaryk University Press
CY  - Brno
SN  - 9788028003500
KW  - methodology
KW  - 3D printing
KW  - teaching
KW  - primary schools
KW  - secondary schools
KW  - teaching aids
UR  - https://munispace.muni.cz/library/catalog/book/2245
N2  - With the development of 3D printing technology in recent years, there has been a significant decrease in the price of printers and thus an increase in the availability of this technology. This technological area opens up new possibilities in a wide range of fields from industry, medicine, construction and architecture to the level of everyday home use. We also see a huge didactic potential in 3D technology, which is currently not being used. The implementation of 3D technologies in teaching at primary and secondary schools enables the creation of completely new types of teaching aids and increases the availability of teaching models for pupils and students. Students can work with teaching models in class and, with methodological supports, they also actively participate in their creation.
ER  -

DOSEDLA, Martin, Zdeněk HODIS, Martina JANČOVÁ, Jiří LEDVINKA, Leni LVOVSKÁ, Kamil MALINKA, Darina MÍSAŘOVÁ, Pavla PITNEROVÁ, Vladimír SCHINDLER, Vojtěch STANĚK, Libuše VODOVÁ a Tomáš STAUDEK. \textit{Integration of 3D printing technology into teaching in primary and secondary schools. Certified Methodology}. Online. 1. vyd. Brno: Masaryk University Press, 2023. odborné a technické vzdělávání. ISBN~978-80-280-0350-0.

Podrobný výpis o publikaci