2006
Elimination voltammetry as a powerful tool for the study of electrodeposition of metals
ROZIK, Roland, Lenka ZERZÁNKOVÁ, Radka MIKELOVÁ a Libuše TRNKOVÁZákladní údaje
Originální název
Elimination voltammetry as a powerful tool for the study of electrodeposition of metals
Název česky
Eliminační voltametrie jako nástroj pro studium elektrodepozice kovů
Autoři
ROZIK, Roland (703 Slovensko), Lenka ZERZÁNKOVÁ (203 Česká republika), Radka MIKELOVÁ (203 Česká republika) a Libuše TRNKOVÁ (203 Česká republika, garant)
Vydání
Edinburgh, 57th Annual Meeting of the International Society of Electrochemistry, s. 116116-116116, 2006
Nakladatel
International Society of Electrochemistry 2006
Další údaje
Jazyk
angličtina
Typ výsledku
Stať ve sborníku
Obor
10405 Electrochemistry
Stát vydavatele
Velká Británie a Severní Irsko
Utajení
není předmětem státního či obchodního tajemství
Kód RIV
RIV/00216224:14310/06:00019333
Organizační jednotka
Přírodovědecká fakulta
Klíčová slova anglicky
Electrochemistry; Nickel; Cobalt; Copper; Paraffin impregnated graphite electrode; Elimination voltammetry with linear scan;
Změněno: 20. 6. 2008 13:07, prof. RNDr. Libuše Trnková, CSc.
V originále
Electrode reaction mechanisms of electrolytical coating by metals of paraffin impregnated graphite electrode (PIGE) were investigated by voltamperometric methods including the elimination voltammetry with linear scan (EVLS). The EVLS is based on the fact that the total voltammetric current (LSV) response consists of a set of particular currents, e.g. charging, diffusion, and kinetic currents having different dependences on scan rate. From voltammetric currents measured at different scan rates the elimination procedure enables selected current components to be eliminated, some current components to be conserved and unknown processes to be revealed [1-3]. In aqueous acidic solutions one of these processes is the hydrogen evolution [3,4]. The attention was focused on the interpretation of electrochemical behavior of metals (Cd, Ni, Co, and Cu) from chloride and sulphate electrolytes. Experiments were performed using the AUTOLAB potentiostat (EcoChemie) with three-electrode setting. For the calculation of elimination functions three voltammetric curves at different scan rates were recorded under the same experimental conditions (potential step and range) [5]. The differences in mechanisms of metals deposition from various supporting electrolytes have been observed as a function of metal concentrations, pH, scan rate, and electrode surface roughness. The EVLS helped also to identify the charge carrying species of metals, and the effect of electrode surface roughness. During the deposition processes the EVLS (E4 function) revealed the pre-peak (Ipp) reflecting some kinetically controlled surface reactions (e.g. adsorption, surface diffusion, nucleation). The study showed that the EVLS is suitable and powerful tool for the study of reduction processes of metals not only on mercury electrodes but also on solid electrodes.
Česky
Eliminační voltametrie jako nástroj pro studium elektrodepozice kovů
Návaznosti
| IAA100040602, projekt VaV |
| ||
| LC06035, projekt VaV |
| ||
| MSM0021622412, záměr |
|