| NOVOTNÝ, Karel, Tomáš VACULOVIČ, Michaela GALIOVÁ, Vítězslav OTRUBA, Viktor KANICKÝ, Jozef KAISER, Miroslav LIŠKA, Ota SAMEK, Radek MALINA a Kateřina PÁLENÍKOVÁ. The use of zinc and iron emission lines in the depth profile analysis of zinc-coated steel. Applied Surface Science. USA: ELSEVIER (NORTH-HOLLAND), 2007, roč. 253, č. 8, s. 3834-3842. ISSN 0169-4332. |
Další formáty:
BibTeX
LaTeX
RIS
@article{711959,
author = {Novotný, Karel and Vaculovič, Tomáš and Galiová, Michaela and Otruba, Vítězslav and Kanický, Viktor and Kaiser, Jozef and Liška, Miroslav and Samek, Ota and Malina, Radek and Páleníková, Kateřina},
article_location = {USA},
article_number = {8},
keywords = {Laser-induced breakdown spectrometry (LIBS); Laser ablation; Coating; Depth profiling; Depth resolution},
language = {eng},
issn = {0169-4332},
journal = {Applied Surface Science},
title = {The use of zinc and iron emission lines in the depth profile analysis of zinc-coated steel},
volume = {253},
year = {2007}
}
TY - JOUR
ID - 711959
AU - Novotný, Karel - Vaculovič, Tomáš - Galiová, Michaela - Otruba, Vítězslav - Kanický, Viktor - Kaiser, Jozef - Liška, Miroslav - Samek, Ota - Malina, Radek - Páleníková, Kateřina
PY - 2007
TI - The use of zinc and iron emission lines in the depth profile analysis of zinc-coated steel
JF - Applied Surface Science
VL - 253
IS - 8
SP - 3834-3842
EP - 3834-3842
PB - ELSEVIER (NORTH-HOLLAND)
SN - 01694332
KW - Laser-induced breakdown spectrometry (LIBS)
KW - Laser ablation
KW - Coating
KW - Depth profiling
KW - Depth resolution
N2 - In this study we report on the results of experiments devoted to the depth profile analysis of zinc coated steel samples using LIBS (Laser Induced Breakdown Spectroscopy) technique. The dependence of zinc and iron emission in three ablation atmospheres (air, argon, helium) was measured using the fundamental wavelength (1064 nm) of the Nd:YAG laser. The highest possible depth resolution was achieved by optimizing the experimental parameters, such as the delay time (which affects the tailing of the zinc emission signal), focusing conditions, energy delivered to the sample, and choice of buffer gases. Current research indicates that there is a constant need to optimize these parameters so that reliable depth-profiling analysis can be performed.
ER -
NOVOTNÝ, Karel, Tomáš VACULOVIČ, Michaela GALIOVÁ, Vítězslav OTRUBA, Viktor KANICKÝ, Jozef KAISER, Miroslav LIŠKA, Ota SAMEK, Radek MALINA a Kateřina PÁLENÍKOVÁ. The use of zinc and iron emission lines in the depth profile analysis of zinc-coated steel. \textit{Applied Surface Science}. USA: ELSEVIER (NORTH-HOLLAND), 2007, roč.~253, č.~8, s.~3834-3842. ISSN~0169-4332.
|
