2019
Characterization of the native oxide on CdTe surfaces
SOBOLA, Dinara, Pavel KASPAR, Alois NEBOJSA, Dušan HEMZAL, Lubomir GRMELA et. al.Základní údaje
Originální název
Characterization of the native oxide on CdTe surfaces
Autoři
SOBOLA, Dinara, Pavel KASPAR, Alois NEBOJSA (203 Česká republika), Dušan HEMZAL (203 Česká republika, garant, domácí), Lubomir GRMELA a Steve SMITH
Vydání
Materials Science-Poland, Warsaw, SCIENDO, 2019, 2083-1331
Další údaje
Jazyk
angličtina
Typ výsledku
Článek v odborném periodiku
Obor
20501 Materials engineering
Stát vydavatele
Polsko
Utajení
není předmětem státního či obchodního tajemství
Odkazy
Impakt faktor
Impact factor: 0.507 v roce 2014
Kód RIV
RIV/00216224:14310/19:00113013
Organizační jednotka
Přírodovědecká fakulta
UT WoS
000478784400009
Klíčová slova anglicky
selective etching; scanning probe microscopy; ellipsometry; Raman spectroscopy
Štítky
Příznaky
Mezinárodní význam, Recenzováno
Změněno: 11. 5. 2020 17:44, Mgr. Marie Šípková, DiS.
Anotace
V originále
This study focuses on the description of oxidation of CdTe monocrystal surfaces after selective chemical etching. Measurements of surface morphology of the oxides occurring in short time are valuable for deeper understanding of the material degradation and fabrication of reliable devices with enhanced performance. The samples with (1 1 1) orientation were selectively etched and cleaned of oxide. Exposure of the oxide-free surfaces of CdTe to air at normal atmospheric conditions over 24 hours leads to an appearance of characteristic surface features. The oxidized surfaces were investigated by scanning electron microscopy, scanning probe microscopy, Raman spectroscopy and ellipsometry. The results indicate clear differences in the oxidation of Cd-terminated and Te-terminated surfaces.
Návaznosti
LM2015041, projekt VaV |
| ||
LQ1601, projekt VaV |
|