Tungsten carbide precursors as an example for influence of a
binder on the particle formation in the nanosecond laser
ablation of powdered materials

J 2010

Tungsten carbide precursors as an example for influence of a binder on the particle formation in the nanosecond laser ablation of powdered materials

HOLÁ, Markéta; Pavel MIKUSKA; Renata HANZLIKOVA; Jozef KAISER; Viktor KANICKÝ et al.

Základní údaje

Originální název

Tungsten carbide precursors as an example for influence of a binder on the particle formation in the nanosecond laser ablation of powdered materials

Autoři

HOLÁ, Markéta; Pavel MIKUSKA; Renata HANZLIKOVA; Jozef KAISER a Viktor KANICKÝ

Vydání

Talanta, AMSTERDAM, Elsevier, 2010, 0039-9140

Další údaje

Jazyk

angličtina

Typ výsledku

Článek v odborném periodiku

Obor

10406 Analytical chemistry

Stát vydavatele

Nizozemské království

Utajení

není předmětem státního či obchodního tajemství

Odkazy

URL

Impakt faktor

Impact factor: 3.722

Označené pro přenos do RIV

Ano

Organizační jednotka

Přírodovědecká fakulta

Klíčová slova anglicky

Laser ablation (LA); Inductively coupled plasma mass spectrometry (ICP-MS); Powder; Matrix effect; Fractionation; Binder; Particle size distribution

Štítky

rivok

Příznaky

Mezinárodní význam, Recenzováno

Změněno: 25. 6. 2020 13:59, Mgr. Marie Novosadová Šípková, DiS.

Anotace

V originále

A study of LA-ICP-MS analysis of pressed powdered tungsten carbide precursors was performed to show the advantages and problems of nanosecond laser ablation of matrix-unified samples. Five samples with different compositions were pressed into pellets both with silver powder as a binder serving to keep the matrix unified, and without any binder The laser ablation was performed by nanosecond Nd YAG laser working at 213 nm. The particle formation during ablation of both sets of pellets was studied using an optical aerosol spectrometer allowing the measurement of particle concentration in two size ranges (10-250 nm and 0.25-17 mu m) and particle size distribution in the range of 0.25-17 mu m. Additionally, the structure of the laser-generated particles was studied after their collection on a filter using a scanning electron microscope (SEM) and the particle chemical composition was determined by an energy dispersive X-ray spectroscope (EDS). The matrix effect was proved lobe reduced using the same silver powdered binder for pellet preparation in the case of the laser ablation of powdered materials. The LA-ICP-MS signal dependence on the element content present in the material showed an improved correlation for Co, Ti, Ta and Nb of the matrix-unified samples compared to the non-matrix-unified pellets. In the case of W, the ICP-MS signal of matrix-unified pellets was influenced by the changes in the particle formation. (C) 2009 Elsevier B.V. All rights reserved.

Návaznosti

GP203/07/P439, projekt VaV

Název: Studium vlastností aerosolu generovaného interakcí laserového záření s práškovými materiály pro metody plazmové spektrometrie

Investor: Grantová agentura ČR, Studium vlastností aerosolu generovaného interakcí laserového záření s práškovými materiály pro metody plazmové spektrometrie

MSM0021622410, záměr

Název: Fyzikální a chemické vlastnosti pokročilých materiálů a struktur

Investor: Ministerstvo školství, mládeže a tělovýchovy ČR, Fyzikální a chemické vlastnosti pokročilých materiálů a struktur

MSM0021622412, záměr

Název: Interakce mezi chemickými látkami, prostředím a biologickými systémy a jejich důsledky na globální, regionální a lokální úrovni (INCHEMBIOL) (Akronym: INCHEMBIOL)

Investor: Ministerstvo školství, mládeže a tělovýchovy ČR, Interakce mezi chemickými látkami, prostředím a biologickými systémy a jejich důsledky na globální , regionální a lokální úrovni

Citovat

HOLÁ, Markéta; Pavel MIKUSKA; Renata HANZLIKOVA; Jozef KAISER a Viktor KANICKÝ. Tungsten carbide precursors as an example for influence of a binder on the particle formation in the nanosecond laser ablation of powdered materials. Talanta. AMSTERDAM: Elsevier, 2010, roč. 80, č. 5, s. 1862-1867. ISSN 0039-9140. Dostupné z: https://doi.org/10.1016/j.talanta.2009.10.035.

@article{1664299,
   author = {Holá, Markéta and Mikuska, Pavel and Hanzlikova, Renata and Kaiser, Jozef and Kanický, Viktor},
   article_location = {AMSTERDAM},
   article_number = {5},
   doi = {https://doi.org/10.1016/j.talanta.2009.10.035},
   keywords = {Laser ablation (LA); Inductively coupled plasma mass spectrometry (ICP-MS); Powder; Matrix effect; Fractionation; Binder; Particle size distribution},
   language = {eng},
   issn = {0039-9140},
   journal = {Talanta},
   title = {Tungsten carbide precursors as an example for influence of a binder on the particle formation in the nanosecond laser ablation of powdered materials},
   url = {https://doi.org/10.1016/j.talanta.2009.10.035},
   volume = {80},
   year = {2010}
}

TY  - JOUR
ID  - 1664299
AU  - Holá, Markéta - Mikuska, Pavel - Hanzlikova, Renata - Kaiser, Jozef - Kanický, Viktor
PY  - 2010
TI  - Tungsten carbide precursors as an example for influence of a binder on the particle formation in the nanosecond laser ablation of powdered materials
JF  - Talanta
VL  - 80
IS  - 5
SP  - 1862-1867
EP  - 1862-1867
PB  - Elsevier
SN  - 00399140
KW  - Laser ablation (LA)
KW  - Inductively coupled plasma mass spectrometry (ICP-MS)
KW  - Powder
KW  - Matrix effect
KW  - Fractionation
KW  - Binder
KW  - Particle size distribution
UR  - https://doi.org/10.1016/j.talanta.2009.10.035
L2  - https://doi.org/10.1016/j.talanta.2009.10.035
N2  - A study of LA-ICP-MS analysis of pressed powdered tungsten carbide precursors was performed to show the advantages and problems of nanosecond laser ablation of matrix-unified samples. Five samples with different compositions were pressed into pellets both with silver powder as a binder serving to keep the matrix unified, and without any binder The laser ablation was performed by nanosecond Nd YAG laser working at 213 nm. The particle formation during ablation of both sets of pellets was studied using an optical aerosol spectrometer allowing the measurement of particle concentration in two size ranges (10-250 nm and 0.25-17 mu m) and particle size distribution in the range of 0.25-17 mu m. Additionally, the structure of the laser-generated particles was studied after their collection on a filter using a scanning electron microscope (SEM) and the particle chemical composition was determined by an energy dispersive X-ray spectroscope (EDS). The matrix effect was proved lobe reduced using the same silver powdered binder for pellet preparation in the case of the laser ablation of powdered materials. The LA-ICP-MS signal dependence on the element content present in the material showed an improved correlation for Co, Ti, Ta and Nb of the matrix-unified samples compared to the non-matrix-unified pellets. In the case of W, the ICP-MS signal of matrix-unified pellets was influenced by the changes in the particle formation. (C) 2009 Elsevier B.V. All rights reserved.
ER  -

HOLÁ, Markéta; Pavel MIKUSKA; Renata HANZLIKOVA; Jozef KAISER a Viktor KANICKÝ. Tungsten carbide precursors as an example for influence of a binder on the particle formation in the nanosecond laser ablation of powdered materials. \textit{Talanta}. AMSTERDAM: Elsevier, 2010, roč.~80, č.~5, s.~1862-1867. ISSN~0039-9140. Dostupné z: https://doi.org/10.1016/j.talanta.2009.10.035.

Přehled o publikaci