HOLÁ, Markéta, Pavel MIKUSKA, Renata HANZLIKOVA, Jozef KAISER a Viktor KANICKÝ. Tungsten carbide precursors as an example for influence of a binder on the particle formation in the nanosecond laser ablation of powdered materials. Talanta. AMSTERDAM: Elsevier, 2010, roč. 80, č. 5, s. 1862-1867. ISSN 0039-9140. Dostupné z: https://dx.doi.org/10.1016/j.talanta.2009.10.035. |
Další formáty:
BibTeX
LaTeX
RIS
@article{1664299, author = {Holá, Markéta and Mikuska, Pavel and Hanzlikova, Renata and Kaiser, Jozef and Kanický, Viktor}, article_location = {AMSTERDAM}, article_number = {5}, doi = {http://dx.doi.org/10.1016/j.talanta.2009.10.035}, keywords = {Laser ablation (LA); Inductively coupled plasma mass spectrometry (ICP-MS); Powder; Matrix effect; Fractionation; Binder; Particle size distribution}, language = {eng}, issn = {0039-9140}, journal = {Talanta}, title = {Tungsten carbide precursors as an example for influence of a binder on the particle formation in the nanosecond laser ablation of powdered materials}, url = {https://doi.org/10.1016/j.talanta.2009.10.035}, volume = {80}, year = {2010} }
TY - JOUR ID - 1664299 AU - Holá, Markéta - Mikuska, Pavel - Hanzlikova, Renata - Kaiser, Jozef - Kanický, Viktor PY - 2010 TI - Tungsten carbide precursors as an example for influence of a binder on the particle formation in the nanosecond laser ablation of powdered materials JF - Talanta VL - 80 IS - 5 SP - 1862-1867 EP - 1862-1867 PB - Elsevier SN - 00399140 KW - Laser ablation (LA) KW - Inductively coupled plasma mass spectrometry (ICP-MS) KW - Powder KW - Matrix effect KW - Fractionation KW - Binder KW - Particle size distribution UR - https://doi.org/10.1016/j.talanta.2009.10.035 L2 - https://doi.org/10.1016/j.talanta.2009.10.035 N2 - A study of LA-ICP-MS analysis of pressed powdered tungsten carbide precursors was performed to show the advantages and problems of nanosecond laser ablation of matrix-unified samples. Five samples with different compositions were pressed into pellets both with silver powder as a binder serving to keep the matrix unified, and without any binder The laser ablation was performed by nanosecond Nd YAG laser working at 213 nm. The particle formation during ablation of both sets of pellets was studied using an optical aerosol spectrometer allowing the measurement of particle concentration in two size ranges (10-250 nm and 0.25-17 mu m) and particle size distribution in the range of 0.25-17 mu m. Additionally, the structure of the laser-generated particles was studied after their collection on a filter using a scanning electron microscope (SEM) and the particle chemical composition was determined by an energy dispersive X-ray spectroscope (EDS). The matrix effect was proved lobe reduced using the same silver powdered binder for pellet preparation in the case of the laser ablation of powdered materials. The LA-ICP-MS signal dependence on the element content present in the material showed an improved correlation for Co, Ti, Ta and Nb of the matrix-unified samples compared to the non-matrix-unified pellets. In the case of W, the ICP-MS signal of matrix-unified pellets was influenced by the changes in the particle formation. (C) 2009 Elsevier B.V. All rights reserved. ER -
HOLÁ, Markéta, Pavel MIKUSKA, Renata HANZLIKOVA, Jozef KAISER a Viktor KANICKÝ. Tungsten carbide precursors as an example for influence of a binder on the particle formation in the nanosecond laser ablation of powdered materials. \textit{Talanta}. AMSTERDAM: Elsevier, 2010, roč.~80, č.~5, s.~1862-1867. ISSN~0039-9140. Dostupné z: https://dx.doi.org/10.1016/j.talanta.2009.10.035.
|