Effect of plasma sizing on basalt fibers adhesion with
wood-working resins

J 2021

Effect of plasma sizing on basalt fibers adhesion with wood-working resins

KRAMÁR, Samuel; Tomáš PIPÍŠKA; Pavel SŤAHEL; Barbora PIJÁKOVÁ; Monika STUPAVSKÁ et al.

Základní údaje

Originální název

Effect of plasma sizing on basalt fibers adhesion with wood-working resins

Autoři

KRAMÁR, Samuel; Tomáš PIPÍŠKA; Pavel SŤAHEL; Barbora PIJÁKOVÁ; Monika STUPAVSKÁ; Anna OBERLE; Pavel KRÁL a Jozef RÁHEĽ

Vydání

European Journal of Wood and Wood Products, New York, Springer, 2021, 0018-3768

Další údaje

Jazyk

angličtina

Typ výsledku

Článek v odborném periodiku

Obor

10302 Condensed matter physics

Stát vydavatele

Spojené státy

Utajení

není předmětem státního či obchodního tajemství

Odkazy

URL

Impakt faktor

Impact factor: 2.528

Označené pro přenos do RIV

Ano

Kód RIV

RIV/00216224:14310/21:00121188

Organizační jednotka

Přírodovědecká fakulta

Klíčová slova anglicky

basalt fibers; woodworking; resins; plasma

Štítky

14312030, rivok

Změněno: 8. 11. 2021 16:32, Mgr. Marie Novosadová Šípková, DiS.

Anotace

V originále

Basalt fabric with manufacturer-made silane sizing was additionally treated by propane-butane enriched atmospheric pressure nitrogen plasma for 15 and 30 s. The wetting improvement of treated fabric was demonstrated by faster soaking of K2CO3 solution. FTIR and XPS analyses confirmed the presence of new nitrogen-containing chemical groups. The impact on adhesion was investigated via a shear strength test of basalt fabric inlay between two beech wooden boards. A short 15 s long treatment led to almost 50% increase in melamine-urea formaldehyde (MUF), polyvinyl acetate (PVAC) and epoxy resin bond strength. Phenol-resorcinol formaldehyde (PRF) needed longer treatment to achieve a bond strength of 11.2 MPa. Only the polyurethane (PUR) showed reduced adhesion to plasma-treated fibers. However, from all tested resins, PUR exhibited the highest bond strength (15.7 MPa) with untreated basalt fabric. The SEM of tested specimens confirmed the changes in the mechanical adherence of resins to plasma treated fibers. Based on these results, PRF and PUR seem to be the most suitable polymers for basalt fibers reinforcement of structural wood-based materials.

Návaznosti

ED2.1.00/03.0086, projekt VaV

Název: Regionální VaV centrum pro nízkonákladové plazmové a nanotechnologické povrchové úpravy

LO1411, projekt VaV

Název: Rozvoj centra pro nízkonákladové plazmové a nanotechnologické povrchové úpravy (Akronym: CEPLANT plus)

Investor: Ministerstvo školství, mládeže a tělovýchovy ČR, Rozvoj centra pro nízkonákladové plazmové a nanotechnologické povrchové úpravy

Citovat

KRAMÁR, Samuel; Tomáš PIPÍŠKA; Pavel SŤAHEL; Barbora PIJÁKOVÁ; Monika STUPAVSKÁ; Anna OBERLE; Pavel KRÁL a Jozef RÁHEĽ. Effect of plasma sizing on basalt fibers adhesion with wood-working resins. European Journal of Wood and Wood Products. New York: Springer, 2021, roč. 79, č. 4, s. 873-885. ISSN 0018-3768. Dostupné z: https://doi.org/10.1007/s00107-021-01673-7.

@article{1748256,
   author = {Kramár, Samuel and Pipíška, Tomáš and Sťahel, Pavel and Pijáková, Barbora and Stupavská, Monika and Oberle, Anna and Král, Pavel and Ráheľ, Jozef},
   article_location = {New York},
   article_number = {4},
   doi = {https://doi.org/10.1007/s00107-021-01673-7},
   keywords = {basalt fibers; woodworking; resins; plasma},
   language = {eng},
   issn = {0018-3768},
   journal = {European Journal of Wood and Wood Products},
   title = {Effect of plasma sizing on basalt fibers adhesion with wood-working resins},
   url = {https://doi.org/10.1007/s00107-021-01673-7},
   volume = {79},
   year = {2021}
}

TY  - JOUR
ID  - 1748256
AU  - Kramár, Samuel - Pipíška, Tomáš - Sťahel, Pavel - Pijáková, Barbora - Stupavská, Monika - Oberle, Anna - Král, Pavel - Ráheľ, Jozef
PY  - 2021
TI  - Effect of plasma sizing on basalt fibers adhesion with wood-working resins
JF  - European Journal of Wood and Wood Products
VL  - 79
IS  - 4
SP  - 873-885
EP  - 873-885
PB  - Springer
SN  - 00183768
KW  - basalt fibers
KW  - woodworking
KW  - resins
KW  - plasma
UR  - https://doi.org/10.1007/s00107-021-01673-7
N2  - Basalt fabric with manufacturer-made silane sizing was additionally treated by propane-butane enriched atmospheric pressure nitrogen plasma for 15 and 30 s. The wetting improvement of treated fabric was demonstrated by faster soaking of K2CO3 solution. FTIR and XPS analyses confirmed the presence of new nitrogen-containing chemical groups. The impact on adhesion was investigated via a shear strength test of basalt fabric inlay between two beech wooden boards. A short 15 s long treatment led to almost 50% increase in melamine-urea formaldehyde (MUF), polyvinyl acetate (PVAC) and epoxy resin bond strength. Phenol-resorcinol formaldehyde (PRF) needed longer treatment to achieve a bond strength of 11.2 MPa. Only the polyurethane (PUR) showed reduced adhesion to plasma-treated fibers. However, from all tested resins, PUR exhibited the highest bond strength (15.7 MPa) with untreated basalt fabric. The SEM of tested specimens confirmed the changes in the mechanical adherence of resins to plasma treated fibers. Based on these results, PRF and PUR seem to be the most suitable polymers for basalt fibers reinforcement of structural wood-based materials.
ER  -

KRAMÁR, Samuel; Tomáš PIPÍŠKA; Pavel SŤAHEL; Barbora PIJÁKOVÁ; Monika STUPAVSKÁ; Anna OBERLE; Pavel KRÁL a Jozef RÁHEĽ. Effect of plasma sizing on basalt fibers adhesion with wood-working resins. \textit{European Journal of Wood and Wood Products}. New York: Springer, 2021, roč.~79, č.~4, s.~873-885. ISSN~0018-3768. Dostupné z: https://doi.org/10.1007/s00107-021-01673-7.

Přehled o publikaci