J 2022

The role of Li2O, MgO and CuO on SO3 activated clinkers

BOHÁČ, Martin; Dana KUBÁTOVÁ; Michaela KREJČÍ KOTLÁNOVÁ; Ingrid KHONGOVÁ; Anežka ZEZULOVÁ et. al.

Základní údaje

Originální název

The role of Li2O, MgO and CuO on SO3 activated clinkers

Autoři

BOHÁČ, Martin; Dana KUBÁTOVÁ; Michaela KREJČÍ KOTLÁNOVÁ; Ingrid KHONGOVÁ; Anežka ZEZULOVÁ; Radoslav NOVOTNÝ; Martin Tchingnabé PALOU; Theodor STANĚK a Dalibor VŠIANSKÝ

Vydání

Cement and Concrete Research, Elsevier Ltd, 2022, 0008-8846

Další údaje

Jazyk

angličtina

Typ výsledku

Článek v odborném periodiku

Obor

20500 2.5 Materials engineering

Stát vydavatele

Velká Británie a Severní Irsko

Utajení

není předmětem státního či obchodního tajemství

Odkazy

Impakt faktor

Impact factor: 11.400

Kód RIV

RIV/00216224:14310/22:00125083

Organizační jednotka

Přírodovědecká fakulta

UT WoS

000720844100002

EID Scopus

2-s2.0-85119177797

Klíčová slova anglicky

Low-energy clinker; SO3 activation; Mineralizers and fluxes; Microstructure; Early hydration

Štítky

Příznaky

Mezinárodní význam, Recenzováno
Změněno: 6. 12. 2021 15:23, Mgr. Marie Novosadová Šípková, DiS.

Anotace

V originále

Clinkers activated by SO3 and modified by Li2O, CuO and MgO were prepared from industrial raw materials and burned at 1350 degrees C. The role of dopants on the burnability of the raw mix was monitored by TG-DTA and heating microscopy. The phase composition of the clinker was characterized by light microscopy, scanning electron microscopy, and X-ray powder diffraction. Predominance of M1 over M3 C3S was determined in all combinations of dopants. Hydration of cement pastes was followed by isothermal calorimetry during the first 48 h and strength development of cement mortars during 365 days of curing. The content of SO3 incorporated in clinker silicates is lower in the presence of Li2O and CuO due to the enrichment of interstitial matter. Thermal analysis shows that Li2O and CuO in combination with SO3 are strong mineralizers and fluxes during clinkering process.