KANICKÝ, Viktor, Vítězslav OTRUBA a Jean-Michel MERMET. Characterization of acoustic signals produced by ultraviolet laser ablation inductively coupled plasma atomic emission spectrometry. Fresenius Journal of Analytical Chemistry, Berlin: Springer-Verlag, 1999, roč. 1999, č. 4, s. 339-346. ISSN 0937-0633.
Další formáty:   BibTeX LaTeX RIS
Základní údaje
Originální název Characterization of acoustic signals produced by ultraviolet laser ablation inductively coupled plasma atomic emission spectrometry
Název česky Charakterizace akustických signálů vznikajících při ablaci ultrafialovým laserem - analýza LA-ICP-OES
Autoři KANICKÝ, Viktor (203 Česká republika, garant), Vítězslav OTRUBA (203 Česká republika) a Jean-Michel MERMET (250 Francie).
Vydání Fresenius Journal of Analytical Chemistry, Berlin, Springer-Verlag, 1999, 0937-0633.
Další údaje
Originální jazyk angličtina
Typ výsledku Článek v odborném periodiku
Obor 10406 Analytical chemistry
Stát vydavatele Německo
Utajení není předmětem státního či obchodního tajemství
Impakt faktor Impact factor: 1.428
Organizační jednotka Přírodovědecká fakulta
UT WoS 000078895300003
Klíčová slova anglicky laser ablation; ultraviolet laser; ICP spectrometry; acoustic signal
Štítky Acoustic signal, ICP spectrometry, laser ablation, ultraviolet laser
Příznaky Mezinárodní význam, Recenzováno
Změnil Změnil: prof. RNDr. Viktor Kanický, DrSc., učo 408. Změněno: 29. 6. 2007 10:10.
Anotace
A simple device was designed to measure the acoustic signal accompanying laser ablation. The potential use of this signal for laser ablation-inductively coupled plasma atomic emission was examined. A frequency quadrupled pulsed Nd:YAG laser radiation was used for the ablation of glass, steel and ceramic samples. The relation between the acoustic signal, the laser energy, the analyte signal and the amount of ablated material was studied and evidence of the use of the acoustic signal for the exact focusing of the laser beam onto the sample surface was given. A more intense acoustic signal was observed for the exact focusing with a formation of larger ablation craters in glass and ceramics.
Anotace česky
A simple device was designed to measure the acoustic signal accompanying laser ablation. The potential use of this signal for laser ablation-inductively coupled plasma atomic emission was examined. A frequency quadrupled pulsed Nd:YAG laser radiation was used for the ablation of glass, steel and ceramic samples. The relation between the acoustic signal, the laser energy, the analyte signal and the amount of ablated material was studied and evidence of the use of the acoustic signal for the exact focusing of the laser beam onto the sample surface was given. A more intense acoustic signal was observed for the exact focusing with a formation of larger ablation craters in glass and ceramics.
VytisknoutZobrazeno: 30. 3. 2020 19:58