KANICKÝ, Viktor, Jan MUSIL a Jean - Michel MERMET. Determination of Zr and Ti in 3-micrometers-thick ZrTiN ceramic coatings using laser ablation inductively coupled plasma atomic emission spectrometry. Applied Spectroscopy, USA: Society Appl. Spectroscopy, 1997, roč. 51, č. 7, s. 1037-1041. ISSN 0003-7028.
Další formáty:   BibTeX LaTeX RIS
Základní údaje
Originální název Determination of Zr and Ti in 3-micrometers-thick ZrTiN ceramic coatings using laser ablation inductively coupled plasma atomic emission spectrometry
Autoři KANICKÝ, Viktor (203 Česká republika, garant), Jan MUSIL (203 Česká republika) a Jean - Michel MERMET (250 Francie).
Vydání Applied Spectroscopy, USA, Society Appl. Spectroscopy, 1997, 0003-7028.
Další údaje
Originální jazyk angličtina
Typ výsledku Článek v odborném periodiku
Obor 10406 Analytical chemistry
Stát vydavatele Spojené státy americké
Utajení není předmětem státního či obchodního tajemství
Impakt faktor Impact factor: 1.848
Organizační jednotka Přírodovědecká fakulta
Klíčová slova anglicky Atomic emission spectrometry; inductively coupled plasma; UV laser ablation; Coating analysis; Nitride ceramic coatings
Štítky atomic emission spectrometry, Coating analysis, inductively coupled plasma, Nitride ceramic coatings, UV laser ablation
Příznaky Recenzováno
Změnil Změnil: prof. RNDr. Viktor Kanický, DrSc., učo 408. Změněno: 29. 6. 2007 09:49.
Anotace
Analysis of 3-mu m-thick ZrN, TIN, and ZrTiN ceramic coatings on a high-speed steel substrate by laser ablation inductively coupled plasma atomic emission spectrometry (LA-ICP-AES) is described, A Nd:YAG laser was used in the Q-switched mode and operated at 355 nm and 5 mJ, Ablation patterns were obtained on the target surface by moving the ablation chamber with respect to the laser beam by means of an X-Y translator, Control of the depth of penetration was obtained by successively performing a limited number of cycles. Transient signals were obtained and their peak areas were used for the construction of calibration graphs based on the concentrations determined by energy-dispersive X-ray (EDX) analysis, An erosion rate of 0.1 mu m per cycle was observed, Crater shape and depth, temporal behavior, and reproducibility of the signals are described.
Anotace česky
Analysis of 3-mu m-thick ZrN, TIN, and ZrTiN ceramic coatings on a high-speed steel substrate by laser ablation inductively coupled plasma atomic emission spectrometry (LA-ICP-AES) is described, A Nd:YAG laser was used in the Q-switched mode and operated at 355 nm and 5 mJ, Ablation patterns were obtained on the target surface by moving the ablation chamber with respect to the laser beam by means of an X-Y translator, Control of the depth of penetration was obtained by successively performing a limited number of cycles. Transient signals were obtained and their peak areas were used for the construction of calibration graphs based on the concentrations determined by energy-dispersive X-ray (EDX) analysis, An erosion rate of 0.1 mu m per cycle was observed, Crater shape and depth, temporal behavior, and reproducibility of the signals are described.
VytisknoutZobrazeno: 31. 3. 2020 10:01