PV172 Architecture of Digital Systems

Faculty of Informatics
Spring 2024
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Taught in person.
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Mgr. Oldřich Pecák (assistant)
Ing. Jan Král, Ph.D. (assistant)
doc. RNDr. Zdeněk Matěj, Ph.D. (alternate examiner)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Computer Systems and Communications – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Timetable
Mon 14:00–15:50 A319
Prerequisites
Course PV170 - Design of Digital Systems is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 70 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design high-performance digital systems.
Learning outcomes
Students will be capable of:
application of basic design elements of digital systems;
understanding the principle of the modular systems design methodology;
tto verify the function of basic modules of digital systems.
Syllabus
  • The structure of a simple number system
  • A typical instructional repertoire
  • Organization of interrupts in a simple processor, DMA
  • Principles of construction and structure of memories and addressing methods
  • A/D and D/A converters
  • Parallel and serial buses - principles of synchronization
  • Input and output devices and their incorporation into simple processors
  • Buffer memory - CACHE memory, entry of individual projects
  • External buses and auxiliary circuits
  • Controllers
  • Acceleration of arithmetic operations
  • Final seminar
Literature
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
Teaching methods
Lectures that correspond to intended aims of tuition.
Assessment methods
The exam consists of the defense of individual projects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
Teacher's information
The course is the theoretical basis for practical applications in the course PB171. Study materials, documentation and instructions are available in electronic form, partly in Czech and mainly in English.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023.

PV172 Architecture of Digital Systems

Faculty of Informatics
Spring 2023
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Taught in person.
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Computer Systems and Communications – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Timetable
Tue 14. 2. to Tue 9. 5. Tue 12:00–13:50 A218
Prerequisites
Course PV170 - Design of Digital Systems is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 70 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design high-performance digital systems.
Learning outcomes
Students will be capable of:
application of the fundamental design components;
understanding principle of the modular systems design methodology;
design and implement connection of external devices.
Syllabus
  • Controllers and Sequencers
  • Structure of the digital systems
  • Addressing of the memory
  • Instruction set of the typical microprocessor
  • Memories and Cache memories
  • Structure of the typical processor and its interrupt system.
  • Direct memory access
  • External busses
  • Auxiliary circuits
  • A/D converters
  • D/A converters
  • Input/output circuits
  • Diagnostics system
  • Checking circuits
Literature
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
Teaching methods
Lectures that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 3 parts:
1) defense of the project - implementation of the design from laboratory lessons and discussion about protocol;
2) design of the circuit and verification of the design by laboratory tools;
3) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2024.

PV172 Architecture of Digital Systems

Faculty of Informatics
Spring 2022
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Taught in person.
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Computer Systems and Communications – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Timetable
Thu 17. 2. to Thu 12. 5. Thu 10:00–11:50 C416
Prerequisites
Course PV170 - Design of Digital Systems is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 70 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design high-performance digital systems.
Learning outcomes
Students will be capable of:
application of the fundamental design components;
understanding principle of the modular systems design methodology;
design and implement connection of external devices.
Syllabus
  • Controllers and Sequencers
  • Structure of the digital systems
  • Addressing of the memory
  • Instruction set of the typical microprocessor
  • Memories and Cache memories
  • Structure of the typical processor and its interrupt system.
  • Direct memory access
  • External busses
  • Auxiliary circuits
  • A/D converters
  • D/A converters
  • Input/output circuits
  • Diagnostics system
  • Checking circuits
Literature
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
Teaching methods
Lectures that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 3 parts:
1) defense of the project - implementation of the design from laboratory lessons and discussion about protocol;
2) design of the circuit and verification of the design by laboratory tools;
3) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2023, Spring 2024.

PV172 Architecture of Digital Systems

Faculty of Informatics
Spring 2021
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Taught online.
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Computer Systems and Communications – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Timetable
Tue 16:00–17:50 Virtuální místnost
Prerequisites
Course PV170 - Design of Digital Systems is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 70 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design high-performance digital systems.
Learning outcomes
Students will be capable of:
application of the fundamental design components;
understanding principle of the modular systems design methodology;
design and implement connection of external devices.
Syllabus
  • Controllers and Sequencers
  • Structure of the digital systems
  • Addressing of the memory
  • Instruction set of the typical microprocessor
  • Memories and Cache memories
  • Structure of the typical processor and its interrupt system.
  • Direct memory access
  • External busses
  • Auxiliary circuits
  • A/D converters
  • D/A converters
  • Input/output circuits
  • Diagnostics system
  • Checking circuits
Literature
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
Teaching methods
Lectures that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 3 parts:
1) defense of the project - implementation of the design from laboratory lessons and discussion about protocol;
2) design of the circuit and verification of the design by laboratory tools;
3) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2022, Spring 2023, Spring 2024.

PV172 Architecture of Digital Systems

Faculty of Informatics
Spring 2020
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Computer Systems and Communications – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Timetable
Mon 17. 2. to Fri 15. 5. Tue 8:00–9:50 C416
Prerequisites
Course PV170 - Design of Digital Systems is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 70 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design high-performance digital systems.
Learning outcomes
Students will be capable of:
application of the fundamental design components;
understanding principle of the modular systems design methodology;
design and implement connection of external devices.
Syllabus
  • Controllers and Sequencers
  • Structure of the digital systems
  • Addressing of the memory
  • Instruction set of the typical microprocessor
  • Memories and Cache memories
  • Structure of the typical processor and its interrupt system.
  • Direct memory access
  • External busses
  • Auxiliary circuits
  • A/D converters
  • D/A converters
  • Input/output circuits
  • Diagnostics system
  • Checking circuits
Literature
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
Teaching methods
Lectures that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 3 parts:
1) defense of the project - implementation of the design from laboratory lessons and discussion about protocol;
2) design of the circuit and verification of the design by laboratory tools;
3) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2021, Spring 2022, Spring 2023, Spring 2024.

PV172 Architecture of Digital Systems

Faculty of Informatics
Spring 2019
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Guaranteed by
doc. RNDr. Aleš Horák, Ph.D.
Department of Machine Learning and Data Processing – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Mon 18:00–19:50 A218
Prerequisites
Course PV170 - Design of Digital Systems is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 33 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design high-performance digital systems. The lessons are specialized in particular into following topics:
- application of the fundamental design components;
- principle of the modular systems design methodology;
- principle of the external devices connecting.
Learning outcomes
Student will be able to:
- explain requirements for implementing various memory addressing methods;
- evaluate the effectiveness of implementing different types of CACHE memorïes;
- control direct memory access;
- operate the basic interrupt system;
- control auxiliary counters and registers of single-chip systems;
- implement and control the input and output circuits of the basic digital systems;
- implement A/D and D/A converters into a simple digital system structure;
- implement basic control and diagnostic tools into simple digital systems.
Syllabus
  • - controllers and sequencers;
  • - structure of the digital systems;
  • - addressing of the memory;
  • - instruction set of the typical microprocessor;
  • - memories and Cache memories;
  • - structure of the typical processor and its interrupt system;
  • - direct memory access;
  • - external busses;
  • - auxiliary circuits;
  • - A/D converters;
  • - D/A converters;
  • - Input/output circuits;
  • - diagnostics system;
  • - checking circuits.
Literature
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
Teaching methods
Lectures that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 3 parts:
1) defense of the project - implementation of the design from laboratory lessons and discussion about protocol;
2) design of the circuit and verification of the design by laboratory tools;
3) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024.

PV172 Architecture of Digital Systems

Faculty of Informatics
Spring 2018
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Ing. Zbyněk Bureš, Ph.D. (assistant)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Guaranteed by
doc. RNDr. Aleš Horák, Ph.D.
Department of Machine Learning and Data Processing – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Thu 16:00–17:50 B411
Prerequisites
Course PV170 - Design of Digital Systems is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 33 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design high-performance digital systems. The lessons are specialized in particular into following topics:
- application of the fundamental design components;
- principle of the modular systems design methodology;
- principle of the external devices connecting.
Learning outcomes
Student will be able to:
- explain requirements for implementing various memory addressing methods;
- evaluate the effectiveness of implementing different types of CACHE memorïes;
- control direct memory access;
- operate the basic interrupt system;
- control auxiliary counters and registers of single-chip systems;
- implement and control the input and output circuits of the basic digital systems;
- implement A/D and D/A converters into a simple digital system structure;
- implement basic control and diagnostic tools into simple digital systems.
Syllabus
  • - controllers and sequencers;
  • - structure of the digital systems;
  • - addressing of the memory;
  • - instruction set of the typical microprocessor;
  • - memories and Cache memories;
  • - structure of the typical processor and its interrupt system;
  • - direct memory access;
  • - external busses;
  • - auxiliary circuits;
  • - A/D converters;
  • - D/A converters;
  • - Input/output circuits;
  • - diagnostics system;
  • - checking circuits.
Literature
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
Teaching methods
Lectures that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 3 parts:
1) defense of the project - implementation of the design from laboratory lessons and discussion about protocol;
2) design of the circuit and verification of the design by laboratory tools;
3) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024.

PV172 Architecture of Digital Systems

Faculty of Informatics
Spring 2017
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Ing. Zbyněk Bureš, Ph.D. (assistant)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Guaranteed by
doc. RNDr. Aleš Horák, Ph.D.
Department of Machine Learning and Data Processing – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Thu 8:00–9:50 A415
Prerequisites
Course PV170 - Design of Digital Systems is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 33 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design high-performance digital systems. The lessons are specialized in particular into following topics:
application of the fundamental design components;
principle of the modular systems design methodology;
principle of the external devices connecting.
Syllabus
  • Controllers and Sequencers
  • Structure of the digital systems
  • Addressing of the memory
  • Instruction set of the typical microprocessor
  • Memories and Cache memories
  • Structure of the typical processor and its interrupt system.
  • Direct memory access
  • External busses
  • Auxiliary circuits
  • A/D converters
  • D/A converters
  • Input/output circuits
  • Diagnostics system
  • Checking circuits
Literature
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
Teaching methods
Lectures that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 3 parts:
1) defense of the project - implementation of the design from laboratory lessons and discussion about protocol;
2) design of the circuit and verification of the design by laboratory tools;
3) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024.

PV172 Architecture of Digital Systems

Faculty of Informatics
Spring 2016
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Ing. Zbyněk Bureš, Ph.D. (assistant)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Guaranteed by
doc. RNDr. Aleš Horák, Ph.D.
Department of Machine Learning and Data Processing – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Wed 18:00–19:50 A218
Prerequisites
PV170 Design of Digital Systems && PB170 Seminar on Dig.Syst. Design
Course PV170 - Design of Digital Systems is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 33 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design high-performance digital systems. The lessons are specialized in particular into following topics:
application of the fundamental design components;
principle of the modular systems design methodology;
principle of the external devices connecting.
Syllabus
  • Controllers and Sequencers
  • Structure of the digital systems
  • Addressing of the memory
  • Instruction set of the typical microprocessor
  • Memories and Cache memories
  • Structure of the typical processor and its interrupt system.
  • Direct memory access
  • External busses
  • Auxiliary circuits
  • A/D converters
  • D/A converters
  • Input/output circuits
  • Diagnostics system
  • Checking circuits
Literature
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
Teaching methods
Lectures that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 3 parts:
1) defense of the project - implementation of the design from laboratory lessons and discussion about protocol;
2) design of the circuit and verification of the design by laboratory tools;
3) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024.

PV172 Architecture of Digital Systems

Faculty of Informatics
Spring 2015
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Ing. Zbyněk Bureš, Ph.D. (assistant)
RNDr. Filip Mravec, Ph.D. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Guaranteed by
doc. RNDr. Aleš Horák, Ph.D.
Department of Machine Learning and Data Processing – Faculty of Informatics
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Tue 16:00–17:50 A415
Prerequisites
PV170 Design of Digital Systems && PB170 Seminar on Dig.Syst. Design
Course PV170 - Design of Digital Systems is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 32 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design high-performance digital systems. The lessons are specialized in particular into following topics:
application of the fundamental design components;
principle of the modular systems design methodology;
principle of the external devices connecting.
Syllabus
  • Controllers and Sequencers
  • Structure of the digital systems
  • Addressing of the memory
  • Instruction set of the typical microprocessor
  • Memories and Cache memories
  • Structure of the typical processor and its interrupt system.
  • Direct memory access
  • External busses
  • Auxiliary circuits
  • A/D converters
  • D/A converters
  • Input/output circuits
  • Diagnostics system
  • Checking circuits
Literature
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
Teaching methods
Lectures that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 3 parts:
1) defense of the project - implementation of the design from laboratory lessons and discussion about protocol;
2) design of the circuit and verification of the design by laboratory tools;
3) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024.

PV172 Architecture of Digital Systems

Faculty of Informatics
Spring 2014
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Tue 8:00–9:50 B202
Prerequisites
PV170 Design of Digital Systems && PB170 Seminar on Dig.Syst. Design
Course PV170 - Design of Digital Systems is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 32 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design high-performance digital systems. The lessons are specialized in particular into following topics:
application of the fundamental design components;
principle of the modular systems design methodology;
principle of the external devices connecting.
Syllabus
  • Controllers and Sequencers
  • Structure of the digital systems
  • Addressing of the memory
  • Instruction set of the typical microprocessor
  • Memories and Cache memories
  • Structure of the typical processor and its interrupt system.
  • Direct memory access
  • External busses
  • Auxiliary circuits
  • A/D converters
  • D/A converters
  • Input/output circuits
  • Diagnostics system
  • Checking circuits
Literature
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
Teaching methods
Lectures that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 3 parts:
1) defense of the project - implementation of the design from laboratory lessons and discussion about protocol;
2) design of the circuit and verification of the design by laboratory tools;
3) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024.

PV172 Architecture of Digital Systems

Faculty of Informatics
Spring 2013
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Wed 10:00–11:50 B202
Prerequisites
PV170 Design of Digital Systems && PB170 Seminar on Dig.Syst. Design
Course PV170 - Design of Digital Systems is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 32 fields of study the course is directly associated with, display
Course objectives
Main aim of this course is understand and master theoretical knowledge necessary for design high-performance digital systems. The lessons are specialized in particular into following topics:
application of the fundamental design components;
principle of the modular systems design methodology;
principle of the external devices connecting.
Syllabus
  • Controllers and Sequencers
  • Structure of the digital systems
  • Addressing of the memory
  • Instruction set of the typical microprocessor
  • Memories and Cache memories
  • Structure of the typical processor and its interrupt system.
  • Direct memory access
  • External busses
  • Auxiliary circuits
  • A/D converters
  • D/A converters
  • Input/output circuits
  • Diagnostics system
  • Checking circuits
Literature
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
Teaching methods
Lectures that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 3 parts:
1) defense of the project - implementation of the design from laboratory lessons and discussion about protocol;
2) design of the circuit and verification of the design by laboratory tools;
3) oral exam - theoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024.

PV172 Architecture of Digital Systems

Faculty of Informatics
Spring 2012
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
RNDr. Vojtěch Krmíček, Ph.D. (assistant)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Thu 14:00–15:50 C511
Prerequisites
( PV170 Design of Digital Systems && PB170 Seminar on Dig.Syst. Design )&& NOW ( PB171 Seminar on Dig.Syst. Arch. )
Course PV170 - Design of Digital Systems is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 32 fields of study the course is directly associated with, display
Course objectives
Main aim of this courese is understand and master theoretical knowledges necessary for design high-performance digital systems. The lessons are specialized in particular into following topics:
application of the fundamental design components;
principle of the modular systems design metodology;
principle of the external devices connecting.
Syllabus
  • Controllers and Sequencers
  • Structure of the digital systems
  • Addressing of the memory
  • Instruction set of the typical microprocessor
  • Memories and Cache memories
  • Structure of the typical processor and interrupt system.
  • Direct memory access
  • External busses
  • Auxiliary circuits
  • A/D convertors
  • D/A convertors
  • Input/output circuits
  • Diagnostics system
  • Checking circuits
Literature
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
Teaching methods
Lectures that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 3 parts:
1) defence of the project - implementation of the design from laboratory lessons and discussion about protocol;
2) design of the circuit and verification of the design by laboratory tools;
3) oral exam - teoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024.

PV172 Architecture of Digital Systems

Faculty of Informatics
Spring 2011
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
prof. Ing. Jaroslav Čechák, Ph.D. (lecturer)
RNDr. Vojtěch Krmíček, Ph.D. (assistant)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Thu 12:00–13:50 C525
Prerequisites
( PV170 Design of Digital Systems && PB170 Seminar on Dig.Syst. Design )&& NOW ( PB171 Seminar on Dig.Syst. Arch. )
Course PV170 - Design of Digital Systems is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 36 fields of study the course is directly associated with, display
Course objectives
Main aim of this courese is understand and master theoretical knowledges necessary for design high-performance digital systems. The lessons are specialized in particular into following topics:
application of the fundamental design components;
principle of the modular systems design metodology;
principle of the external devices connecting.
Syllabus
  • Controllers and Sequencers
  • Structure of the digital systems
  • Addressing of the memory
  • Instruction set of the typical microprocessor
  • Memories and Cache memories
  • Structure of the typical processor and interrupt system.
  • Direct memory access
  • External busses
  • Auxiliary circuits
  • A/D convertors
  • D/A convertors
  • Input/output circuits
  • Diagnostics system
  • Checking circuits
Literature
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
  • ŠNOREK, RICHTA. Připojování periférií k PC
Teaching methods
Lectures that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 3 parts:
1) defence of the project - implementation of the design from laboratory lessons and discussion about protocol;
2) design of the circuit and verification of the design by laboratory tools;
3) oral exam - teoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024.

PV172 Architecture of Digital Systems

Faculty of Informatics
Spring 2010
Extent and Intensity
2/0. 2 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Ing. Zbyněk Bureš, Ph.D. (seminar tutor)
RNDr. Vojtěch Krmíček, Ph.D. (seminar tutor)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Tue 10:00–11:50 B410
Prerequisites
( PV170 Design of Digital Systems && PB170 Seminar on Dig.Syst. Design )&& NOW ( PB171 Seminar on Dig.Syst. Arch. )
Course PV170 - Design of Digital Systems is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 36 fields of study the course is directly associated with, display
Course objectives
Main aim of this courese is understand and master theoretical knowledges necessary for design high-performance digital systems. The lessons are specialized in particular into following topics:
application of the fundamental design components;
principle of the modular systems design metodology;
principle of the external devices connecting.
Syllabus
  • Architecture of the digital systems;
  • structure of processors, CISC and RISC structures;
  • bus subsystem of the digital systems;
  • memory subsystem of the digital systems;
  • input and output subsystem the digital systems;
  • linkage hardware and operation system the digital systems;
  • external busses subsystem;
  • external memory subsystems;
  • design systems and simulations systems of digital systems.
Literature
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
  • ŠNOREK, RICHTA. Připojování periférií k PC
Teaching methods
Lectures that correspond to intended aims of tuition.
Assessment methods
Final examination consists of 3 parts:
1) defence of the project - implementation of the design from laboratory lessons and discussion about protocol;
2) design of the circuit and verification of the design by laboratory tools;
3) oral exam - teoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024.

PV172 Digital Computer Architecture

Faculty of Informatics
Spring 2009
Extent and Intensity
2/2. 4 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Ing. Zbyněk Bureš, Ph.D. (seminar tutor)
RNDr. Vojtěch Krmíček, Ph.D. (seminar tutor)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Tue 8:00–9:50 B410, Tue 10:00–11:50 B202
Prerequisites
Course PV170 - Design of Digital Computersis is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
The capacity limit for the course is 30 student(s).
Current registration and enrolment status: enrolled: 0/30, only registered: 0/30, only registered with preference (fields directly associated with the programme): 0/30
fields of study / plans the course is directly associated with
there are 37 fields of study the course is directly associated with, display
Course objectives
Main aim of this courese is understand and master theoretical knowledges necessary for design high-performance digital systems. The lessons are specialized in particular into following topics:
application of the fundamental design components;
principle of the modular systems design metodology;
principle of the external devices connecting.
Syllabus
  • rchitecture of the digital systems;
  • structure of processors, CISC and RISC structures;
  • bus subsystem of the digital systems;
  • memory subsystem of the digital systems;
  • input and output subsystem the digital systems;
  • linkage hardware and operation system the digital systems;
  • external busses subsystem;
  • external memory subsystems;
  • design systems and simulations systems of digital systems.
Literature
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
Assessment methods
Final examination consist from 3 parts:
1) defence of the project - implementation of the design from laboratory lessons and discussion about protocol;
2) design of the circuit and verification of the design by laboratory tools;
3) oral exam - teoretical problems from list of the passed subjects.
Language of instruction
Czech
Follow-Up Courses
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2008, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024.

PV172 Digital Computer Architecture

Faculty of Informatics
Spring 2008
Extent and Intensity
2/2. 4 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Ing. Zbyněk Bureš, Ph.D. (seminar tutor)
RNDr. Vojtěch Krmíček, Ph.D. (seminar tutor)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Mon 12:00–13:50 B011, Tue 15:00–16:50 B202, Wed 16:00–17:50 B202
  • Timetable of Seminar Groups:
PV172/01_utery: No timetable has been entered into IS. Z. Bureš, V. Krmíček
PV172/02_streda: No timetable has been entered into IS. Z. Bureš, V. Krmíček
Prerequisites
Course PV170 - Design of Digital Computersis is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
The capacity limit for the course is 30 student(s).
Current registration and enrolment status: enrolled: 0/30, only registered: 0/30, only registered with preference (fields directly associated with the programme): 0/30
fields of study / plans the course is directly associated with
there are 37 fields of study the course is directly associated with, display
Course objectives
Basic account of computing and information systems structure. Design and operational structure of computer machines. Basic principles of computer machines design. Operation principles of computer machines basic components and circuits. Structure and operations of contemporaneous computer machines design components. Fundamentals of design solving and interconnection of digital curcuits. Operational principles of basic peripheral circuits. Fundamentals and systems of basic peripheral circuits control and connecting. Modular design and expansion in capacity and functions of computer machines in accordance with mission. Handy hardware design of a computer machine core. Design one chip microcomputer applications. Handy basic software design of a computer machine core. Design and simulation tools for development of computer machine hardware and software.
Syllabus
  • Architecture of computer machines. General structure of processors, CISC and RISC structures. Bus subsystem of computer machines. Memory subsystem of computer machine. Input and output subsystem of computer machine. Linkage hardware and operation system of computer machine. External busses subsystem. External memory subsystems. Programmable array. Single-chip computers. Design systems and simulations systems of digital systems Methodology of application job solving. Design of personal computers. Parallel computer systems.
Literature
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
Assessment methods (in Czech)
Zkouška se skládá ze tří částí: 1) obhajoba obvodů navržených v rámci praktických zaměstnání 2) příklad - návrh obvodu a jeho simulace pomocí nástrojů implementovaných v laboratoři architektury a konstrukce číslicových počítačů. 3) ústní odpověď na teoretickou otázku z přehledu témat ke zkoušce
Language of instruction
Czech
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2007, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024.

PV172 Digital Computer Architecture

Faculty of Informatics
Spring 2007
Extent and Intensity
2/2. 4 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Ing. Zbyněk Bureš, Ph.D. (seminar tutor)
doc. Ing. Pavel Čeleda, Ph.D. (seminar tutor)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Fri 8:00–13:50 B117, Fri 8:00–13:50 B202
Prerequisites
Course PV170 - Design of Digital Computersis is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is offered to students of any study field.
The capacity limit for the course is 30 student(s).
Current registration and enrolment status: enrolled: 0/30, only registered: 0/30, only registered with preference (fields directly associated with the programme): 0/30
Course objectives
Basic account of computing and information systems structure. Design and operational structure of computer machines. Basic principles of computer machines design. Operation principles of computer machines basic components and circuits. Structure and operations of contemporaneous computer machines design components. Fundamentals of design solving and interconnection of digital curcuits. Operational principles of basic peripheral circuits. Fundamentals and systems of basic peripheral circuits control and connecting. Modular design and expansion in capacity and functions of computer machines in accordance with mission. Handy hardware design of a computer machine core. Design one chip microcomputer applications. Handy basic software design of a computer machine core. Design and simulation tools for development of computer machine hardware and software.
Syllabus
  • Architecture of computer machines. General structure of processors, CISC and RISC structures. Bus subsystem of computer machines. Memory subsystem of computer machine. Input and output subsystem of computer machine. Linkage hardware and operation system of computer machine. External busses subsystem. External memory subsystems. Programmable array. Single-chip computers. Design systems and simulations systems of digital systems Methodology of application job solving. Design of personal computers. Parallel computer systems.
Literature
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
Assessment methods (in Czech)
Zkouška se skládá ze tří částí: 1) obhajoba obvodů navržených v rámci praktických zaměstnání 2) příklad - návrh obvodu a jeho simulace pomocí nástrojů implementovaných v laboratoři architektury a konstrukce číslicových počítačů. 3) ústní odpověď na teoretickou otázku z přehledu témat ke zkoušce
Language of instruction
Czech
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2006, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024.

PV172 Architecture of the Digital Computer

Faculty of Informatics
Spring 2006
Extent and Intensity
2/2. 4 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Ing. Zbyněk Bureš, Ph.D. (seminar tutor)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Contact Person: prof. Ing. Václav Přenosil, CSc.
Timetable
Wed 12:00–13:50 B007, Wed 14:00–15:50 B116
Prerequisites
Course PV170 - Design of Digital Computersis is advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is offered to students of any study field.
The capacity limit for the course is 30 student(s).
Current registration and enrolment status: enrolled: 0/30, only registered: 0/30, only registered with preference (fields directly associated with the programme): 0/30
Course objectives
Basic account of computing and information systems structure. Design and operational structure of computer machines. Basic principles of computer machines design. Operation principles of computer machines basic components and circuits. Structure and operations of contemporaneous computer machines design components. Fundamentals of design solving and interconnection of digital curcuits. Operational principles of basic peripheral circuits. Fundamentals and systems of basic peripheral circuits control and connecting. Modular design and expansion in capacity and functions of computer machines in accordance with mission. Handy hardware design of a computer machine core. Handy basic software design of a computer machine core. Design and simulation tools for development of computer machine hardware and software.
Syllabus
  • Architecture of computer machines. General structure of processors, CISC and RISC structures. Bus subsystem of computer machines. Memory subsystem of computer machine. Input and output subsystem of computer machine. Linkage hardware and operation system of computer machine. External busses subsystem. External memory subsystems. Programmable array. Single-chip computers. Design systems and simulations systems of digital systems Methodology of application job solving. Design of personal computers. Parallel computer systems.
Literature
  • ŠNOREK, RICHTA. Připojování periférií k PC
  • HLAVIČKA, J. Computer architecture. Praha: ČVUT, 1999
  • DOUŠA, J., PLUHÁČEK, V. Introduction to computer systems. Praha: ČVUT, 2000
Assessment methods (in Czech)
Zkouška se skládá ze tří částí: 1) obhajoba obvodů navržených v rámci praktických zaměstnání 2) příklad - návrh obvodu a jeho simulace pomocí nástrojů implementovaných v laboratoři architektury a konstrukce číslicových počítačů. 3) ústní odpověď na teoretickou otázku z přehledu témat ke zkoušce
Language of instruction
English
Further comments (probably available only in Czech)
The course is taught annually.
Information on course enrolment limitations: Maximální počet studentů je dán kapacitou laboratoří
The course is also listed under the following terms Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024.
  • Enrolment Statistics (recent)